All these advantages will be available after passing the Administering Windows Server AZ-802 certification exam which is not easy to pass. However, the complete AZ-802 test preparation and proper planning can enable you to crack the Microsoft AZ-802 exam easily. For the complete and comprehensive AZ-802 exam preparation, you can trust Microsoft AZ-802 PDF Questions and practice tests. The Microsoft is one of the leading platforms that are committed to ace the Administering Windows Server AZ-802 Exam Preparation with the Microsoft AZ-802 valid dumps. The Microsoft AZ-802 practice questions are the real AZ-802 exam questions that are verified by experience and qualified Microsoft AZ-802 exam experts.
| Section | Weight | Objectives |
|---|---|---|
| Implement and manage an on-premises and hybrid networking infrastructure | 15% | - Secure network traffic in hybrid environments - Implement hybrid network connectivity - Configure software-defined networking - Configure IP addressing, DNS, and DHCP |
| Implement high availability and disaster recovery | 5% | - Use Azure Site Recovery for hybrid workloads - Perform server and workload migrations - Monitor and troubleshoot Windows Server environments - Configure failover clustering - Implement backup and recovery solutions |
| Manage Windows Servers and workloads in a hybrid environment | 20% | - Deploy servers using Windows Admin Center and Azure Arc - Manage updates and patches across hybrid servers - Implement hybrid identity solutions - Configure remote management and secure administration |
| Deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments | 20% | - Integrate AD DS with Azure AD and Azure Arc - Implement and manage Group Policy Objects - Manage FSMO roles and replication - Install and configure domain controllers |
| Secure Windows Server on-premises and hybrid infrastructures | 10% | - Implement security baselines and hardening - Manage access control and permissions - Configure Windows Defender and audit policies |
| Manage virtual machines and containers | 15% | - Deploy and manage Hyper-V virtual machines - Deploy and manage containers and Kubernetes on Windows Server - Configure Azure Arc-enabled servers and VMs |
| Manage storage and file services | 15% | - Configure file servers and shares - Configure data deduplication and replication - Integrate on-premises storage with Azure Storage - Implement Storage Spaces and Storage Spaces Direct |
>> Exam AZ-802 Questions Answers <<
Now you do not need to worry about the relevancy and top standard of Actual4dump Administering Windows Server in AZ-802 exam questions. These Microsoft AZ-802 dumps are designed and verified by qualified AZ-802 exam trainers. Now you can trust Actual4dump AZ-802 Practice Questions and start preparation without wasting further time. With the Actual4dump AZ-802 exam questions, you will get everything that you need to learn, prepare and pass the challenging AZ-802 exam with good scores.
NEW QUESTION # 426
Your on-premises network contains an Active Directory Domain Services (AD DS) domain.
You plan to implement BitLocker Drive Encryption (BitLocker) for the domain.
You create a Group Policy Object (6P0) and enable the Choose how BitLocker-protected operating system drives can be recovered Group Policy setting.
You need to configure a data recovery agent (DRA) for drive recovery.
What should you use to configure the DRA, and which additional Group Policy setting should you enable? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Configure the DRA by using: A digital certificate. Enable setting: Choose default folder for recovery password.
A BitLocker data recovery agent is configured using a public-key (PKI) digital certificate issued from a duplicated Key Recovery Agent template that carries the BitLocker Drive Encryption and BitLocker Data Recovery Agent application policies; the certificate ' s public key is added to the domain ' s DRA configuration through Public Key Policies > BitLocker Drive Encryption in Group Policy, after which every computer that later encrypts a drive under that policy automatically protects the drive ' s recovery key with the DRA certificate, letting a holder of the corresponding private key decrypt any protected drive domain-wide. A BitLocker recovery password (a 48-digit numerical key), a user principal name, and a security identifier are all identifiers or credentials associated with individual users or computers rather than the credential type used to configure a data recovery agent itself, so none of those options describes how a DRA is set up. Because a DRA relies on 48-digit numerical recovery passwords being generated and escrowed for each protected drive as the actual recovery mechanism the DRA certificate later decrypts, enabling Choose default folder for recovery password ensures every BitLocker-enabled computer automatically saves a copy of its numerical recovery password to a specified, centrally accessible network folder as each drive is encrypted, giving administrators (and, in effect, the DRA-holding recovery workflow) a reliable location to retrieve recovery data from without depending solely on AD DS storage or manual per-user handling.
NEW QUESTION # 427
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an on-premises server named Server1 that runs Windows Server. You have a Microsoft Sentinel instance. You add the Windows Firewall data connector in Microsoft Sentinel. You need to ensure that Microsoft Sentinel can collect Windows Firewall logs from Server1. Solution: You install the Microsoft Integration Runtime on Server1. Does this meet the goal?
Answer: A
Explanation:
The Microsoft Integration Runtime is a compute infrastructure component used by Azure Data Factory and Azure Synapse Analytics pipelines to move and transform data between on-premises data stores and cloud data stores as part of extract-transform-load workloads. It has no relationship whatsoever to Windows event log collection, the Azure Monitor Agent, or the Microsoft Sentinel Windows Firewall data connector, which relies on an entirely separate mechanism built around agent-based log forwarding and data collection rules.
Installing the Integration Runtime on Server1 does not create any pipeline that reads Windows Firewall events from the local event log, and it does not register Server1 with Log Analytics or associate it with the data collection rule the connector needs. Because this component addresses a completely unrelated data-movement scenario rather than event log forwarding, installing it on Server1 does not enable Sentinel to collect Windows Firewall logs, so this solution does not meet the goal.
NEW QUESTION # 428
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK.
You open a new branch office that contains only client computers. You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1. Solution: You create a new site named Site4 and associate Site4 to DEFAULTIPSITELINK. Does this meet the goal?
Answer: A
Explanation:
Creating a new site named Site4 does not, by itself, put the branch office ' s client computers into Site1, which is the only thing that would make them prefer Site1 ' s domain controllers. A client ' s site membership is computed exclusively from its IP address matched against subnet objects defined in Active Directory Sites and Services; simply creating Site4 and linking it to DEFAULTIPSITELINK affects replication topology (which sites can replicate with which, and on what schedule/cost), not which site a given IP subnet, and therefore which client, belongs to. Without associating the branch office ' s actual subnet to a site, and specifically to Site1 as required here, the branch clients remain unassigned to any site (or fall back to whatever default site-coverage logic applies), and creating an unrelated fourth site changes nothing about that.
Even if Site4 were intended to represent the branch office, the solution never creates or maps a subnet object to it, let alone to Site1, so there is no mechanism by which client authentication traffic would be steered toward Site1 ' s domain controllers. The only way to meet the goal is to create a subnet object for the branch office ' s IP range and associate that subnet directly with Site1. Because this solution does neither of those things, it does not meet the stated goal.
NEW QUESTION # 429
You have an Azure subscription named sub1 and 500 on-premises virtual machines that run Windows Server.
You plan to onboard the on-premises virtual machines to Azure Arc by running the Azure Arc deployment script. You need to create an identity that will be used by the script to authenticate access to sub1. The solution must use the principle of least privilege. How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. ___ - DisplayName ' arc-for-servers ' -Role ___
Answer:
Explanation:
Explanation:
New-AzADServicePrincipal -DisplayName ' arc-for-servers ' -Role ' Azure Connected Machine Onboarding ' At-scale onboarding to Azure Arc with a deployment script authenticates using a service principal rather than an interactive sign-in, and Microsoft ' s guidance for scripted, least-privilege onboarding is to create that service principal with New-AzADServicePrincipal, supplying a -DisplayName and assigning it the built-in Azure Connected Machine Onboarding role, optionally scoped to a specific resource group with -Scope. This role grants only the permissions required to register a machine with Arc and complete the connect operation; it does not include general compute, storage, or networking rights, which is why it satisfies least privilege far better than a broad role such as Contributor. The other two cmdlets in the option list do not fit this task: New- AzADAppCredential only adds or rotates a credential (secret or certificate) on an application object that already exists, and it performs no role assignment; New-AzUserAssignedIdentity creates a standalone managed identity resource, which is a different authentication mechanism used by Azure resources calling other Azure services, not a mechanism a locally run onboarding script can use to authenticate against an Azure AD tenant. For the role value, Virtual Machine Contributor and Virtual Machine User Login both exceed what onboarding needs, since they grant ongoing VM management or interactive sign-in rights rather than the narrow, one-time registration permission the Azure Connected Machine Onboarding role provides.
NEW QUESTION # 430
Your network contains an Active Director/ Domain Services {AD DS) domain named contoso.com. The domain contains two sites named Site1 and Site2 and servers that run Windows Server and are configured as shown in the following table.
The domain contains a group named Group1 that contains Server3.
RODC1 has the Password Replication Policy shown in the following exhibit.
Exhibit
Exhibit
Exhibit
Exhibit
Answer:
Explanation:
Explanation:
An RODC only caches (replicates) the password of a security principal that is explicitly permitted by its Password Replication Policy - in the exhibit, only members of the built-in Allowed RODC Password Replication Group and the custom Group1 are set to Allow, while Administrators, Account Operators, Backup Operators, Server Operators, and the Denied RODC Password Replication Group are all set to Deny.
A user who is not covered by an Allow entry authenticates through pass-through validation to a writable DC and never has credentials cached on the RODC, so User1 ' s credentials are not stored on RODC1, making statement 1 No. Because Server3 sits in Site2 alongside RODC1 and is a member of Group1 (an Allow entry), a user whose credentials are already cached there can still authenticate locally through RODC1 even if WAN connectivity to Site1 ' s writable domain controllers is lost, which is why User2 can sign in successfully during the outage, making statement 2 Yes. Interactive local sign-in to the RODC console itself is governed separately by the RODC ' s Administrator Role Separation (local Administrators group), not by the Password Replication Policy, and nothing in the scenario grants User3 that local logon right, so statement 3 is No.
NEW QUESTION # 431
......
Actual4dump is a leading platform that has been helping the AZ-802 exam candidates for many years. Over this long time period, countless AZ-802 exam candidates have passed their dream Administering Windows Server certification and they all got help from valid, updated, and Real AZ-802 Exam Questions. So you can also trust the top standard of Actual4dump AZ-802 exam dumps and start AZ-802 practice questions preparation without wasting further time.
Exam AZ-802 Cram Review: https://www.actual4dump.com/Microsoft/AZ-802-actualtests-dumps.html