BONUS!!! Download part of ITExamSimulator SD-WAN-Engineer dumps for free: https://drive.google.com/open?id=1hcAxMw5N7KsaHUcKLw_jtkXw1Xgjk57Y
It is really a tough work to getting SD-WAN-Engineer certification in their spare time because preparing actual exam dumps needs plenty time and energy. As the one of certification exam dumps provider, ITExamSimulator enjoys a high popularity for its profession of SD-WAN-Engineer Exam Dumps and training materials. You will get high passing score in test with the help of our SD-WAN-Engineer braindumps torrent.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> SD-WAN-Engineer Test Assessment <<
In the world of industry, SD-WAN-Engineer certification is the key to a successful career. If you have achieved credential such as SD-WAN-Engineer then it means a bright future is waiting for you. Avail the opportunity of SD-WAN-Engineer dump at ITExamSimulator.com that helps you in achieving good scores in the exam. Due to these innovative methodologies students get help online. The SD-WAN-Engineer Exam Questions Answers PDF is very effective and greatly helpful in increasing the skills of students. They can easily cover the exam topics with more practice due to the unique set of SD-WAN-Engineer exam dump. The SD-WAN-Engineer certification learning is getting popular with the passage of time.
NEW QUESTION # 14
What is the default action for real-time media applications if link performance is poor?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
According to the Prisma SD-WAN Performance Policy Default Behavior documentation, the default action configured for applications (including real-time media) when a path experiences poor performance (violates the SLA thresholds for latency, jitter, or packet loss) is to Move Flows.
The Prisma SD-WAN ION device continuously monitors the health of all available paths. If the active path for a media application degrades and fails to meet the specified SLA, the default policy dictates that the traffic should be steered (moved) to an alternate, compliant path that meets the performance criteria.
While Forward Error Correction (FEC) is a powerful feature available in Prisma SD-WAN to mitigate packet loss for real-time applications, it is an optional action that must be explicitly enabled or configured within the performance policy rules. It is not the default action in the base system configuration; the primary default mechanism for handling performance issues is to leverage the multi-path fabric to switch to a better link.
NEW QUESTION # 15
Site templates are to be used for the large-scale deployment of 100 Prisma SD-WAN branch sites across different regions.
Which two statements align with the capabilities and best practices for Prisma SD-WAN site templates? (Choose two.)
Answer: A,C
Explanation:
Comprehensive and Detailed Explanation
Site Templates (often referred to as Site Configuration Templates) are a critical tool for the Zero Touch Provisioning (ZTP) of large-scale deployments in Prisma SD-WAN.
1. Device Pre-staging (Statement C):
One of the primary capabilities of Site Templates is the creation of Device Shells. A device shell is a configuration container that exists in the controller before the physical hardware is installed or connected. By using a template, an administrator can pre-provision the entire configuration (interfaces, routing, subnets) for the "Site" and "Element" (Device). When the physical ION device is later connected to the internet and claimed (associated with the shell via its Serial Number), it immediately inherits this pre-staged configuration, enabling a true "plug-and-play" deployment.
2. Mandatory Variables (Statement B):
To successfully instantiate a functional site from a generic template, specific unique identifiers are required in the variable data set (typically a CSV file).
Site Name: Identifies the location in the portal.
ION Software Version: Ensures the device boots to the specific validated code version required for the deployment, preventing inconsistencies.
ION Serial Number / Device Name: Required to bind the logical configuration (Shell) to the physical hardware. Even if the serial is added later during the claim process, the structure of the template and the deployment workflow mandates these variables to ensure the device can be uniquely identified and managed within the fabric.
Note on Option D: While it is technically possible to re-deploy a template, the Best Practice for "Day 2" operations (updating or modifying configuration after deployment) is to use Prisma SD-WAN Stacks (Network Stacks, Security Stacks, etc.). Stacks allow for granular, policy-based updates across multiple sites without the destructive or rigid nature of re-applying a full site initialization template. Therefore, D is not the aligned best practice.
NEW QUESTION # 16
Based on the HA topology image below, which two statements describe the end-state when power is removed from the ION 1200-S labeled "Active", assuming that the ION labeled "Standby" becomes the active ION? (Choose two.)
Answer: C,D
Explanation:
Comprehensive and Detailed Explanation at least 150 to 250 words each from Palo Alto Networks SD-WAN Engineer documents:
Prisma SD-WAN High Availability (HA) for branch ION devices, particularly the Gen-2 ION 1200-S, is designed to provide "100% WAN Capacity" preservation during a hardware or power failure. This is achieved through the use of Bypass Pairs (Fail-to-Wire). In the provided topology, the ISP A and LTE/5G circuits are cross-connected using the bypass ports (typically ports 3 and 4 on the ION 1200-S).
When the "Active" ION device loses power, the internal physical relays in its bypass ports transition to a closed state, effectively creating a physical bridge between the ports. In this scenario, the LTE/5G signal-which enters the Active ION's port 4-is mechanically bridged to port 3, allowing it to pass through to port 4 of the Standby ION. Simultaneously, ISP A is already connected to the Standby ION. Consequently, once the Standby device completes its transition to the "Active" state, it has physical access to both WAN circuits, validating Statement A.
Regarding the LAN transition, Prisma SD-WAN does not use standard VRRP for ION-to-ION HA; instead, it uses a proprietary Control Plane HA mechanism. When the failover occurs, the newly active ION takes over the IP addresses of all configured Switch Virtual Interfaces (SVIs) and LAN interfaces. To ensure the downstream Layer 2 infrastructure (like the LAN switches shown in the diagram) updates its MAC address tables to point to the new physical hardware for those IPs, the newly active ION immediately broadcasts a Gratuitous ARP (GARP). This ensures that LAN traffic is correctly steered to the new device without a significant timeout, validating Statement C.
NEW QUESTION # 17
Which troubleshooting step should be taken when users at a branch site are experiencing a maximum throughput of 200 Mbps for Direct Internet Access (DIA) traffic on a 1 Gbps internet connection?
Answer: D
Explanation:
In Prisma SD-WAN, the effective throughput for any given circuit is fundamentally dictated by the Circuit Configuration defined at the site level. When a branch experiences a "throughput ceiling" (e.g., traffic capped at 200 Mbps on a 1 Gbps physical link), the most likely cause is that the software-defined bandwidth limit for that circuit has been set incorrectly in the Prisma SD-WAN Controller.
Prisma SD-WAN ION devices do not simply forward traffic at the maximum physical line rate by default; they rely on the administrator-defined Upstream and Downstream bandwidth values to perform traffic shaping, policing, and path selection. If a circuit is physically capable of 1 Gbps but is configured in the portal as having only 200 Mbps, the ION device will enforce this 200 Mbps limit to prevent oversubscribing the link and to ensure that Quality of Service (QoS) and path selection calculations remain accurate based on the assumed capacity.
To resolve this, an engineer must navigate to the Site Configuration, locate the specific WAN circuit, and verify that the bandwidth settings match the actual service provider's handoff. If these values are set lower than the actual link speed, the device will artificially throttle the traffic. While ensuring the WAN interface is set to the correct speed/duplex (Option B) is a valid physical layer check, and QoS/Performance policies (Options A and C) manage how that bandwidth is used, it is the Circuit Configuration that defines the total available bandwidth for the SD-WAN fabric to utilize. Correcting this configuration allows the ION device to scale its throughput to match the full 1 Gbps capability of the broadband connection.
NEW QUESTION # 18
A multinational company is deploying Prisma SD-WAN across North America, Europe, and Asi a. The data centers in the North America region have served all regions, but regional policies are now being enforced that mandate each of the regions to build their own data centers and branch sites to only connect to their respective regional data centers.
How can this regionalization be achieved so that new or existing branch sites only build tunnels to the regional DC IONs?
Answer: C
Explanation:
Comprehensive and Detailed Explanation
To achieve strict regional isolation where branch sites only form VPN tunnels with Data Centers in their specific region (e.g., EU branches to EU DCs only), the correct architectural feature to utilize is VPN Clusters.
In Prisma SD-WAN (CloudGenix), a Cluster defines a logical security and topology boundary for the overlay network. By default, devices may be placed in a "Default" cluster where they attempt to form a mesh or hub-and-spoke topology with all other reachable devices in that context.
To enforce the new policy:
Logical Partitioning: The administrator should create separate VPN Clusters for each region (e.g., "Cluster-NA", "Cluster-EU", "Cluster-Asia").
Assignment: The Regional Data Center IONs and their corresponding Branch IONs must be moved into their respective clusters.
Result: The Prisma SD-WAN controller dictates that devices can only establish Secure Fabric (VPN) tunnels with other devices within the same cluster. This effectively segments the global network, ensuring that an Asian branch never attempts to build a tunnel to a North American DC, satisfying the compliance requirement without complex access lists or manual tunnel configuration.
Option B (Manual Tunnels) is administratively unscalable and negates the benefits of SD-WAN automation.
Option C (Circuit Labels) is primarily for path selection and traffic steering, not for hard topology segmentation.
Option D (VRFs) is used for local Layer 3 segmentation (routing isolation) within a device, not for controlling WAN overlay tunnel formation scope.
NEW QUESTION # 19
......
These Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) mock tests will give you real SD-WAN-Engineer exam experience. This feature will boost your confidence when taking the Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) certification exam. The 24/7 support system has been made for you so you don't feel difficulty while using the product. In addition, we offer free demos and up to 1 year of free Palo Alto Networks Dumps updates. Buy It Now!
SD-WAN-Engineer Exam Sims: https://www.itexamsimulator.com/SD-WAN-Engineer-brain-dumps.html
P.S. Free 2026 Palo Alto Networks SD-WAN-Engineer dumps are available on Google Drive shared by ITExamSimulator: https://drive.google.com/open?id=1hcAxMw5N7KsaHUcKLw_jtkXw1Xgjk57Y