This is a desktop-based NSEI_OTS_AR-7.6 practice exam software that doesn't require an internet connection except for license validation during purchase. The software provides Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice exams that are customizable, helping students prepare for the actual NSEI_OTS_AR-7.6 Exam. The team updates the Fortinet NSEI_OTS_AR-7.6 tests regularly and is available 24/7 to address any issues. Assessment records are saved for easy tracking. Windows computers support the desktop Fortinet NSEI_OTS_AR-7.6 practice exam software.
| Section | Objectives |
|---|---|
| Topic 1: Network Access Control | - Explain OT Ethernet concepts - Configure network access authentication - Configure network segmentation schemas |
| Topic 2: Asset Management | - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network |
| Topic 3: Monitoring and Risk Assessment | - Perform risk assessment and management - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers |
| Topic 4: Network Security | - Configure automation - Configure security inspections for industrial protocols - Configure virtual patching |
>> Valid NSEI_OTS_AR-7.6 Exam Online <<
Our NSEI_OTS_AR-7.6 exam simulation is selected many experts and constantly supplements and adjust our questions and answers. When you use our NSEI_OTS_AR-7.6 study materials, you can find the information you need at any time. When we update the NSEI_OTS_AR-7.6 preparation questions, we will take into account changes in society, and we will also draw user feedback. If you have any thoughts and opinions in using our NSEI_OTS_AR-7.6 Study Materials, you can tell us. We hope to grow with you and the continuous improvement of NSEI_OTS_AR-7.6 training engine is to give you the best quality experience.
NEW QUESTION # 10
In the Purdue model, at which level are physical assets like the Industrial Internet of Things (IIoT) placed?
(Choose one answer)
Answer: A
Explanation:
According to the OT Security 7.6 Architect study guide regarding the Purdue Model :
* Asset Location : The study guide states that " All critical physical assets are located on the plant floor and equipped with IIoT sensors. "
* Level Classification : The " plant floor " is further defined as the " control area zone, " which consists of Levels 0, 1, and 2 .
* Hierarchy : The " Operations & Control " zone is identified as Level 3 and Level 3.5 .
* Direct Answer : In the " Introduction " lesson ' s Knowledge Check , the specific question " In the Purdue model, at which level are IIoTs placed? " is provided with the verified answer: Below Level 3.5 .
NEW QUESTION # 11
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)
Answer: C
Explanation:
Explanation:
NEW QUESTION # 12
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 13
Refer to the exhibit. A partial OT network is shown. You must improve the security of this OT network and implement internal segmentation between network 1 and network 2. How can you achieve the segmentation?
(Choose one answer)
Answer: C
Explanation:
The correct answer is D. You can configure forward domain IDs for each network . The study guide explains that in FortiGate transparent mode, "all interfaces belong to the same broadcast domain, even interfaces with different VLAN IDs" and then states that you should "use this command to subdivide into multiple broadcast domains" with set forward-domain < domain_ID > . It further explains that
"interfaces with the same domain ID belong to the same broadcast domain" and "traffic arriving on one interface is broadcast only to interfaces in the same forward domain ID." This is exactly the mechanism used to separate one internal network from another and improve segmentation.
The other options do not match this requirement. Universal ZTNA is described as controlling user access to applications , not segmenting two internal OT networks. An explicit software switch is for controlling intra- switch or intra-VLAN traffic inside the same software switch broadcast domain, which is more aligned with microsegmentation than separating two routed internal networks. One traffic VDOM does not create segmentation by itself; segmentation with VDOMs requires multiple VDOMs, not one. Therefore, the best choice for segmenting network 1 and network 2 in this scenario is to assign separate forward domain IDs .
NEW QUESTION # 14
In your OT environment, you want to detect the devices passively. Which two methods must you implement?
(Choose two answers)
Answer: C,D
Explanation:
The correct answers are C. Vendor OUI and D. Network traffic .
The study guide explicitly separates active/direct profiling methods from passive/non-direct methods and states that "In OT environments, passive methods are preferred over active methods." It then lists the methods that do not require FortiNAC to interact directly with the device being profiled. Among those methods are "Network traffic: gathered from the infrastructure" and "Vendor OUI: determined by the MAC address gathered from the infrastructure." That directly matches options C and D .
Options A and B are incorrect because SSH and SNMP are shown in the guide under the direct/active profiling methods. The guide's point is that passive detection avoids directly scanning or interacting with OT endpoints, since that can negatively affect performance in industrial environments. Because the question specifically asks for passive detection methods, the correct pair is Vendor OUI and Network traffic .
NEW QUESTION # 15
......
The NSEI_OTS_AR-7.6 PDF dumps are suitable for smartphones, tablets, and laptops as well. So you can study actual NSEI_OTS_AR-7.6 questions in PDF easily anywhere. It-Tests updates Fortinet NSE I - OT Security 7.6 Architect PDF dumps timely as per adjustments in the content of the actual Fortinet NSEI_OTS_AR-7.6 Exam. The Desktop Fortinet NSE I - OT Security 7.6 Architect practice exam software is created and updated in a timely by a team of experts in this field. If any problem arises, a support team is there to fix the issue.
Reliable NSEI_OTS_AR-7.6 Exam Blueprint: https://www.it-tests.com/NSEI_OTS_AR-7.6.html