DumpsTests, as a provider, specializing in providing all candidates with AZ-802 exam-related materials, focus on offering the most excellent dumps for the candidates. In contrast with other websites, DumpsTests is more trustworthy. Why? Because DumpsTests has many years of experience and our Microsoft experts have been devoted themselves to the study of Microsoft certification exam and summarize AZ-802 Exam rules. Thus, DumpsTests exam dumps have a high hit rate. Meanwhile, it guarantees the qualification rate in the exam. Therefore, DumpsTests got everyone's trust.
| Section | Objectives |
|---|---|
| Topic 1: Monitoring and troubleshooting | - System monitoring
|
| Topic 2: Secure Windows Server hybrid infrastructures | - Security configuration
|
| Topic 3: Manage hybrid compute and virtualization | - Containers
|
| Topic 4: Implement and manage high availability | - Failover clustering
|
| Topic 5: Disaster recovery and migration | - Backup and restore
|
| Topic 6: Networking and storage infrastructure | - Storage management
|
The disparity between our AZ-802 practice materials and others are distinct. We strive for perfection all these years and get satisfactory results with concerted cooperation between experts, and all questions points in our AZ-802 real exam are devised and written base on the real exam. Do not let other AZ-802 Study Dumps mess up your performance or aggravate learning difficulties. The efficiency and accuracy of our AZ-802 learning guide will not let you down.
NEW QUESTION # 63
You have two file servers named Server1 and Server2 that run Windows Server. Server1 contains a shared folder named Data. Data contains 10 TB of data. You plan to decommission Server1. You need to migrate the files from Data to a new shared folder on Server2. The solution must meet the following requirements: -- Ensure that share, file, and folder permissions are copied. -- After the initial copy occurs, ensure that changes in \\Server1\Data can be synced to the destination without initiating a full copy. -- Minimize administrative effort. What should you use?
Answer: C
Explanation:
Storage Migration Service is purpose-built for exactly this scenario: it inventories a source server ' s shares, files, and their associated share and NTFS permissions, performs the initial data transfer, and then supports repeated incremental synchronizations that copy only the data that changed since the last sync, rather than requiring a full re-copy of all 10 TB each time. It also provides an optional cutover step that can reassign the source server ' s name and IP address to the destination server, further minimizing disruption and administrative effort during a decommissioning project like this one. Plain file-copy utilities such as xcopy or azcopy do not natively inventory and re-sync only changed files across repeated runs, and copying permissions with them requires additional manual scripting effort. Storage Replica is a block-level, continuous replication technology designed to keep volumes synchronized for high availability or disaster recovery rather than a guided, one-time migration tool with permission-aware share cutover. Therefore, Storage Migration Service is the tool that meets all three stated requirements with the least administrative effort.
NEW QUESTION # 64
You have two file servers named Server1 and Server2 that run Windows Server. Server1 contains a shared folder named Data. Data contains 10 TB of data. You plan to decommission Server1. You need to migrate the files from Data to a new shared folder on Server2. The solution must meet the following requirements: -- Ensure that share, file, and folder permissions are copied. -- After the initial copy occurs, ensure that changes in \\Server1\Data can be synced to the destination without initiating a full copy. -- Minimize administrative effort. What should you use?
Answer: C
NEW QUESTION # 65
You have an Active Directory Domain Services (AD DS) forest that has the Active Directory Recycle Bin enabled. The forest contains a user named User1. User1 is accidentally deleted. You need to restore User1 from the Active Directory Recycle Bin. What should you use?
Answer: A
Explanation:
With the Active Directory Recycle Bin enabled, deleted objects retain their attributes and can be restored, and Active Directory Administrative Center is the graphical tool that exposes the Deleted Objects container and a Restore (or Restore To) action for recovering them, including User1. Active Directory Users and Computers does not expose the Deleted Objects container by default and has no restore functionality, and Sites and Services or Domains and Trusts are unrelated to object recovery. ADAC is therefore the tool to use for a straightforward Recycle Bin restore of a deleted user. From ADAC, an administrator navigates to the Deleted Objects container in the domain, selects User1, and chooses Restore to return the account to its original location with its original attributes and group memberships intact, avoiding the more involved authoritative- restore or tombstone-reanimation procedures required when the Recycle Bin is not enabled. The same restore operation can also be performed with the Restore-ADObject PowerShell cmdlet once the object ' s deleted- object GUID is identified, which is a useful alternative when scripting bulk recoveries rather than restoring a single account interactively through ADAC.
NEW QUESTION # 66
You have servers that have the DNS Server role installed. The servers are configured as shown in the following exhibit (Server1/Paris/contoso.com/10.1.1.1, Server2/New York/no local zone/10.2.2.2). All the client computers in the New York office use Server2 as the DNS server. You need to configure name resolution in the New York office to meet the following requirements: ensure that the client computers in New York can resolve names from contoso.com; ensure that Server2 forwards all DNS queries for internet hosts to 131.107.100.200. The solution must NOT require modifications to Server1. Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
Server1 (Paris, contoso.com, 10.1.1.1) / Server2 (New York, no local zone, 10.2.2.2).
Answer: C,D
Explanation:
Server2 hosts no local DNS zone of its own, so on its own it cannot resolve either the internal contoso.com namespace (hosted only on Server1) or internet names. To route all internet queries to a specific upstream resolver at 131.107.100.200, you configure a standard forwarder on Server2 pointing at that address; a forwarder is used precisely for the general case of " send anything I can ' t answer myself to this server, " which fits the internet-resolution requirement. To resolve the internal contoso.com namespace without touching Server1 at all, you configure a conditional forwarder on Server2 scoped specifically to the domain contoso.com and pointed at Server1 ' s IP address (10.1.1.1); a conditional forwarder only intercepts queries for names under the configured domain, leaving the general forwarder to continue handling everything else, including internet hosts. Together, the conditional forwarder (contoso.com queries go to Server1) and the general forwarder (everything else, i.e., internet hosts, goes to 131.107.100.200) satisfy both requirements using configuration only on Server2. A zone delegation or a secondary zone would each require some cooperating configuration or zone transfer capability on Server1 itself, violating the " no modifications to Server1 " constraint, and a reverse lookup zone resolves IP-to-name queries, which is unrelated to either stated requirement.
NEW QUESTION # 67
Your network contains a single domain Active Directory Domain Services (AD DS) forest named contoso.
com. The forest contains a single Active Directory site.
You plan to deploy a read only domain controller (RODC) to a new datacenter on a server named Server1. A user named User1 is a member of the local Administrators group on Server1.
You need to recommend a deployment plan that meets the following requirements:
Ensures that a user named User1 can perform the RODC installation on Server1 Ensures that you can control the AD DS replication schedule to the Server1 Ensures that Server1 is in a new site named RemoteSite1 Uses the principle of least privilege Which three actions should you recommend performing in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Create a site and a subnet (RemoteSite1, associated with the datacenter ' s IP subnet). 2. Create a site link (connecting RemoteSite1 to the existing site, with the desired schedule/cost). 3. Pre-create an RODC account (delegating its installation to User1).
Because Server1 must end up in a brand-new site, the plan must begin by creating that site along with a subnet object mapped to the datacenter ' s IP range and associated with the new site, which is exactly what places Server1 in RemoteSite1 once it is promoted there. Next, to be able to control the replication schedule between RemoteSite1 and the rest of the forest, an administrator must create a dedicated site link, since replication timing, frequency, and cost between sites are properties of the site link object, not of the sites themselves; without an explicit site link (or by relying only on a shared default link), that granular scheduling control would not exist for this specific site pair. Finally, to satisfy least privilege while still letting User1 - a mere local administrator on Server1, not a domain administrator - complete the RODC promotion, the recommended practice is to pre-create (stage) the RODC computer account in advance and explicitly delegate the installation to User1 during that staging process. This lets User1 attach Server1 to the pre-created account and finish the promotion locally without ever needing domain-wide administrative rights. Running the AD DS installation wizard directly as a non-delegated local admin would fail without domain credentials, and adding User1 to the Contoso\Administrators (Domain Admins) group would grant far more access than necessary, violating least privilege. The correct order is: create the site and subnet, create the site link, then pre-create the RODC account.
NEW QUESTION # 68
......
If you are the first time to buy the AZ-802 learning material online, or you have bought them for many times, there may be some problem that puzzle you, if you have any questions about the AZ-802 exam dumps, you can ask our service stuff for help. They have the professional knowledge of AZ-802 Training Materials, and they will be very helpful for solving your problem. In addition, we have free demo for you to try before buying the product, and you can have a try before purchasing.
AZ-802 Reliable Test Labs: https://www.dumpstests.com/AZ-802-latest-test-dumps.html