Our MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 exam question can make you stand out in the competition. Why is that? The answer is that you get the SRAN-Radio-Network-Performance-Optimization certificate. What certificate? Certificates are certifying that you have passed various qualifying examinations. Watch carefully you will find that more and more people are willing to invest time and energy on the SRAN-Radio-Network-Performance-Optimization Exam, because the exam is not achieved overnight, so many people are trying to find a suitable way. Fortunately, you have found our SRAN-Radio-Network-Performance-Optimization real exam materials, which is best for you.
| Section | Objectives |
|---|---|
| Topic 1: SRAN Architecture Overview | - SRAN network structure and components
|
| Topic 2: LTE/NR Performance Optimization | - Optimization techniques
|
| Topic 3: Radio Network Performance Fundamentals | - Key performance indicators (KPIs)
|
| Topic 4: Troubleshooting and Performance Analysis | - Network issue identification and resolution
|
| Topic 5: RF Optimization Principles | - Coverage and capacity optimization
|
>> Certified Nokia SRAN-Radio-Network-Performance-Optimization Questions <<
Why you should trust TestKingIT? By trusting TestKingIT, you are reducing your chances of failure. In fact, we guarantee that you will pass the SRAN-Radio-Network-Performance-Optimization certification exam on your very first try. If we fail to deliver this promise, we will give your money back! This promise has been enjoyed by over 90,000 takes whose trusted TestKingIT. Aside from providing you with the most reliable dumps for SRAN-Radio-Network-Performance-Optimization, we also offer our friendly customer support staff. They will be with you every step of the way.
NEW QUESTION # 19
What is the role of admission control in 5G networks ?
Answer: D
Explanation:
The correct answer is D .
Admission control is responsible for deciding whether a new UE connection, bearer, service, or session can be accepted by the cell without negatively affecting existing users and services.
In 5G RAN, admission control checks available radio resources such as:
* PRB availability
* PDCCH/PUCCH capacity
* UE context capacity
* QoS requirements
* GBR or non-GBR bearer requirements
* Cell load and congestion status
It does not directly manage modulation schemes; that is handled by link adaptation. It also does not directly increase spectral efficiency or optimize downlink throughput, although good admission control indirectly protects user experience and avoids overload.
So the main role of admission control is:
To check whether there are enough resources for new connections.
NEW QUESTION # 20
Single Network Slice Selection Assistance Information , or S-NSSAI , identifies a network slice. Which of the following statements are correct regarding NSSAI ? Refer to the diagram for basic information.
Answer: A
Explanation:
The correct answer is D: A, B, C, and D .
In 5G network slicing, S-NSSAI identifies a single network slice. It is composed of:
SST , or Slice/Service Type
SD , or Slice Differentiator
Statement A is correct.
The combination of SST + SD can uniquely identify a slice. For example, two slices may both use SST 1 for eMBB/MBB-type service, but different SD values can separate them for different enterprises, tenants, or service groups.
Statement B is correct.
SST is mandatory. It is an 8-bit numeric field that indicates the expected slice/service behavior, such as eMBB, URLLC, or mMTC.
Statement C is correct.
SD is optional. It is a 24-bit field used to differentiate multiple slices that may share the same SST.
Statement D is correct.
SST may use standardized values, such as SST 1 for eMBB, SST 2 for URLLC, and SST 3 for mMTC/MIoT.
It may also use operator-specific or non-standardized values depending on deployment requirements.
NEW QUESTION # 21
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?
Answer: D
Explanation:
The correct answer is Format 1 / Type B .
For PRACH planning, the selected preamble format must support the required cell radius. Format 0 is too short for a 33 km cell because it is typically suitable only up to around 14.5 km . Format 2 is also not suitable because its practical maximum cell radius is around 29.5 km , which is below the required 33 km . Therefore, a longer PRACH format is needed.
Because the scenario mentions high mobility , an unrestricted PRACH set is not preferred. High-mobility environments require a restricted set to handle Doppler effects and reduce ambiguity in PRACH preamble detection. Between the restricted-set options, Type B is the correct choice for this 33 km high-mobility case.
A matching Nokia-style question source also lists this exact scenario with Format 1 / Type B as option A.
NEW QUESTION # 22
Which of the following statements does not apply to mmWave radio propagation ?
Answer: D
Explanation:
The correct answer is C .
At mmWave / FR2 frequencies , radio propagation is more challenging than in low-band or mid-band spectrum. Diffraction becomes weaker, blockage is more severe, foliage attenuation is high, and building penetration loss is significant. This is why mmWave networks usually require dense site grids, line-of-sight or near-line-of-sight paths, and strong beamforming. Industry mmWave references consistently describe high path loss, high penetration loss, and the need for directional antenna systems to compensate for these losses.
Option C does not apply because water absorption and atmospheric absorption generally become more relevant at higher frequencies, not lower. Rain, humidity, and oxygen/water-vapor absorption are important considerations for mmWave link budgets.
So the statement that does not apply to mmWave propagation is:
Low water absorption at high frequencies.
NEW QUESTION # 23
Evaluate the impact of extended FR2 cell range on power consumption.
Answer: C
Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.
NEW QUESTION # 24
......
There is always a fear of losing SRAN-Radio-Network-Performance-Optimization exam and causes you loss of money and waste time on some unless materials. However, these risks will never exist in our SRAN-Radio-Network-Performance-Optimization exam materials. Your money and exam attempt is bound to award you a sure and definite success with 100% money back guarantee. You can claim for the refund of money if you do not succeed and achieve your target. Our SRAN-Radio-Network-Performance-Optimization exam materials have a most reliable guarantee. We ensure you that you will be paid back in full without any deduction and you can easily pass the SRAN-Radio-Network-Performance-Optimization Exam by using our SRAN-Radio-Network-Performance-Optimization dumps. Moreover, you will get all the updated SRAN-Radio-Network-Performance-Optimization questions with verified answers. If you want to prepare yourself for the real exam, then it is one of the most effect ways to improve your SRAN-Radio-Network-Performance-Optimization exam preparation level.
SRAN-Radio-Network-Performance-Optimization Valid Practice Materials: https://www.testkingit.com/Nokia/latest-SRAN-Radio-Network-Performance-Optimization-exam-dumps.html