많은 사이트에서도 무료Juniper JN0-364덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한Juniper JN0-364데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리DumpTOP에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: IPv6 | 8-12% | - Address types and format - Static and dynamic routing - OSPFv3 and BGP for IPv6 - Autoconfiguration |
| Topic 2: Open Shortest Path First (OSPF) | 15-20% | - Areas and router types - LSA types and operation - Link-state database - Configuration and troubleshooting |
| Topic 3: Protocol-Independent Routing | 10-15% | - Filter-based forwarding - Routing instances and RIB groups - Static, aggregate, and generated routes - Load balancing - Martian addresses |
| Topic 4: Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Topic 5: High Availability | 5-8% | - Nonstop active routing - NSR and GRES concepts - Graceful restart |
| Topic 6: Spanning Tree Protocols | 8-12% | - STP, RSTP, MSTP, VSTP - Configuration and convergence - Port roles and states - BPDU and protection features |
| Topic 7: Multiprotocol Label Switching (MPLS) | 12-18% | - Configuration and monitoring - LDP and RSVP - Terminology and forwarding - Labels and LIB - Segment routing basics |
| Topic 8: Intermediate System to Intermediate System (IS-IS) | 10-15% | - Configuration and monitoring - Metrics and wide metrics - PDUs and TLVs - Adjacencies and levels |
| Topic 9: Layer 2 Bridging and VLANs | 8-12% | - Bridging concepts - VLANs and trunking - Service provider switching features |
| Topic 10: Border Gateway Protocol (BGP) | 20-25% | - Basic operation and message types - Path selection and attributes - Policy and route filtering - Configuration and troubleshooting - IBGP and EBGP |
DumpTOP Juniper JN0-364 덤프는Juniper JN0-364실제시험 변화의 기반에서 스케줄에 따라 업데이트 합니다. 만일 테스트에 어떤 변화가 생긴다면 될수록 2일간의 근무일 안에Juniper JN0-364 덤프를 업데이트 하여 고객들이 테스트에 성공적으로 합격 할 수 있도록 업데이트 된 버전을 구매후 서비스로 제공해드립니다. 업데이트할수 없는 상황이라면 다른 적중율 좋은 덤프로 바꿔드리거나 덤프비용을 환불해드립니다.
질문 # 154
You are configuring BGP for IPv6 operations.
In this scenario, which two statements are correct? (Choose two.)
정답：A
설명：
BGP uses a router ID that is always a 32-bit value, even when BGP is operating for IPv6 address families.
BGP supports both 16-bit and 32-bit Autonomous System Numbers through the use of four-byte ASN extensions, allowing ASNs to be represented using a 32-bit value.
질문 # 155
Referring to the exhibit, which two statements are correct? (Choose two.)
정답：A,C
설명：
In the given exhibit, interface ge-0/0/0 is configured to accept VLANs 101-120 and ge-0/0/1 is configured with flexible VLAN tagging, which means it can tag traffic with any VLAN ID specified.
However, only VLAN 200 is explicitly mentioned for ge-0/0/1. A. Traffic tagged with VLAN 101 will pass through ge-0/0/0 and will egress on ge-0/0/1 with the same VLAN tag, because the VLAN ID is within the allowed range on both interfaces. B. VLAN 100 is not specified in the allowed VLAN range for ge-0/0/0 (which is 101-120), nor is it specified under ge-0/0/1. Therefore, it will be dropped.
질문 # 156
Referring to the exhibit, what must be included in the Route1 configuration when establishing an EBGP session with the ISP?
정답：B
설명：
When establishing an EBGP session, it's necessary to specify both the local AS number and the local address that the session will use. The local address is required for establishing the TCP connection for BGP. The local AS must be specified to identify the autonomous system of the router.
질문 # 157
You are asked to configure a new network environment that will be based on IPv6 and use OSPF.
In this scenario, which two statements correctly identify configuration task considerations?
(Choose two.)
정답：A,C
설명：
OSPF uses a router ID that is a 32-bit value, even when operating in an IPv6 environment with OSPFv3. The router ID remains an IPv4-style identifier used for protocol operations and LSAs.
When running OSPFv3 in an IPv6-based environment, participating interfaces only need to be configured with the IPv6 protocol family and an IPv6 address. IPv4 addressing is not required for OSPFv3 operation.
질문 # 158
Which two protocols would be used for dynamic routing in IPv6 environments? (Choose two.)
정답：B,D
설명：
The transition to IPv6 requires routing protocols that are capable of carrying 128-bit address information.
Juniper Networks Junos OS supports several "IPv6-ready" protocols for dynamic routing.
1. IS-IS (Option B):
As discussed in previous questions,IS-ISis inherently extensible due to its use ofTLVs (Type, Length, Value)
. To support IPv6, the protocol did not need a major rewrite; instead, new TLVs (such as TLV 236 for IPv6 reachability and TLV 232 for IPv6 interface addresses) were added. A single IS-IS process in Junos can simultaneously carry both IPv4 and IPv6 routing information, making it a highly efficient choice for "dual- stack" service provider backbones.
2. BGP (Option D):
BGP was updated to support multiple protocols throughMultiprotocol Extensions (MP-BGP), defined in RFC 4760. By usingAddress Family Identifiers (AFI)andSubsequent Address Family Identifiers (SAFI), a single BGP session can exchange NLRI (Network Layer Reachability Information) for IPv4 unicast, IPv6 unicast, and even VPNv4/VPNv6 routes. In Junos, this is configured under the family inet6 unicast hierarchy within the BGP protocols configuration.
Why other options are incorrect:
* IGMP (Option A):This is a management protocol for IPv4 multicast (Internet Group Management Protocol). Its IPv6 equivalent isMLD (Multicast Listener Discovery).
* OSPFv2 (Option C):OSPF version 2 is strictly for IPv4. To run OSPF in an IPv6 environment,OSPFv3 must be used, as it was specifically redesigned to handle the IPv6 address space and link-local communication.
질문 # 159
......
DumpTOP는 여러분이 빠른 시일 내에Juniper JN0-364인증시험을 효과적으로 터득할 수 있는 사이트입니다.Juniper JN0-364인증 자격증은 일상생활에 많은 개변을 가져올 수 있는 시험입니다.Juniper JN0-364인증 자격증을 소지한 자들은 당연히 없는 자들보다 연봉이 더 높을 거고 승진기회도 많아지며 IT업계에서의 발전도 무궁무진합니다.
JN0-364시험대비 인증공부: https://www.dumptop.com/Juniper/JN0-364-dump.html