Preparing for the exam may be not an easy thing for some candidates, if you choose us, we will do the things for you, what you need to do is practicing. We offer you free demo for 300-110 training materials, you can have a try before buying. And you will receive the downloading link and password within ten minutes after purchasing the 300-110 Exam Dumps. In addition, we have after-service stuff to resolve the confusions you have. If you fail to pass the exam, we are money back guaranteed, or if you have other exam to attend, we can also replace other 2 valid exam dumps for you.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wireless Site Survey | 25% | - Pre-deployment survey and validation - Layer 1 site survey execution and analysis - Design requirements collection and constraint evaluation
|
| Topic 2: WLAN High Availability and Security Design | 20% | - Management and monitoring design - Security architecture design
|
| Topic 3: Mobility Design | 25% | - Guest mobility and BYOD design - Roaming optimization
|
| Topic 4: Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
>> Pass Leader 300-110 Dumps <<
If you have aspiration to be an IT specialist with considerable salary and work in big company, our Cisco exam dumps will make your dream closer. You just need to prepare 300-110 real questions with one or two days and we will give your support in every steps of your IT test preparation if you have any problems and doubts to our 300-110 Pdf Torrent.
NEW QUESTION # 59
An engineer must identify the network requirements for a company that has a main office and 10 branch offices. The network must be able to support data, voice, video, and location tracking.
Which two factors must be considered? (Choose two.)
Answer: B,C
Explanation:
When designing a wireless network to support diverse services -- including data, voice, video, and location tracking -- across a distributed enterprise with a main office and 10 branch locations, the two primary design factors directly shaping the RF and capacity architecture are the number of wireless devices requiring access and the type of site where the survey will be performed. The device count (Option B) drives AP density, channel reuse planning, capacity modeling, and controller licensing requirements. Each service type -- particularly VoWLAN and video -- imposes strict per- client throughput and latency constraints that must be multiplied across the concurrent device population. The type of site (Option C) determines the survey approach, attenuation characteristics, coverage requirements, and antenna selection. A warehouse, hospital, or open- plan office each demands a fundamentally different RF design.
NEW QUESTION # 60
Refer to the exhibit. A network engineer is designing a high availability SSO on a Cisco Catalyst 9800-40 WLC with multi-LAG network redundancy on two Catalyst 9300 switches. The LAG requirements are: * Each LAG must be connected to a single switch. * Different VLANs must be assigned to different LAGs. * The controller must learn the identity of partners that can support LAG capabilities in each port. * When any active LAG ports fail, a standby LAG port must provide redundancy. Which protocol must be used for the port channel on the interface to meet the design requirements?
Answer: D
Explanation:
The design requirements specify a multi-LAG configuration where each LAG connects to a single switch, different VLANs are assigned to different LAGs, the controller must dynamically learn partner LAG capabilities per port, and standby ports provide redundancy upon active port failure. These requirements collectively point to IEEE 802.3ad LACP (Link Aggregation Control Protocol) as the correct protocol. LACP is the industry-standard IEEE protocol that enables dynamic negotiation of LAG membership between endpoints - the WLC and each Catalyst 9300 switch exchange LACP PDUs (LACPDUs) to discover port capabilities, negotiate bundle membership, and monitor link status. LACP supports active and passive port states where active ports initiate negotiation and passive ports respond, and it provides the standby port mechanism through its hot-standby capability for link redundancy within the bundle. The requirement to ' learn the identity of partners that can support LAG capabilities ' is the defining characteristic of LACP ' s standardized PDU exchange mechanism. PAgP (Option C) is a Cisco proprietary port aggregation protocol that, while functionally similar, is not the IEEE standard and is incompatible with non-Cisco equipment in mixed environments. OSPF (Option B) and BGP (Option D) are Layer 3 routing protocols entirely unrelated to port channel negotiation. Reference: WLSD Study Guide - Catalyst 9800 LAG Configuration, LACP IEEE 802.3ad, Multi-LAG High Availability Design.
NEW QUESTION # 61
A customer has two Cisco wireless controllers named WLC-A and WLC-B. Each controller is in a different building on a campus. The WLCs have different Layer 3 interfaces and broadcast the same SSIDs from their respective APs. Users must remain connected to the same VLAN and maintain their IP addresses during roaming from the APs attached to WLC-A and WLC-B. Which action accomplishes the requirement?
Answer: A
Explanation:
The requirement for users to retain their VLAN assignment and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco's wireless architecture, IP address preservation across controller boundaries is achieved through inter- controller mobility -- specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client's traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires creating a mobility group between WLC-A and WLC-B with both controllers configured with the same mobility group name -- the group name is the trust identifier that permits the mobility tunnel and anchor-foreign relationship to form.
NEW QUESTION # 62
A university has three campus locations and the main data center. Each campus location has a Cisco Catalyst 9800-40 WLC that manages 600 APs. The data center has a Catalyst 9800-40 WLC, which serves as N+1 backup for each campus WLC. A consulting engineer must install four additional Catalyst 9800-40 WLCs to serve as high availability SSO pairs for each campus, but only two have been approved due to budget restrictions. Requirements: Data center WLC must always be available as N+1 backup, Campus1 WLC must operate with zero downtime, and in the event of multiple campus outages, the AP priority order is to support Campus3, Campus2, then Campus1. Which design approach must the consulting engineer take?
Answer: B
Explanation:
This design scenario requires careful interpretation of the SSO pair function and AP priority semantics. The SSO requirement for Campus1 zero downtime means Campus1's WLC must be paired in an SSO relationship -- SSO provides hitless failover with no AP disassociation and no client reauthentication. The data center WLC, which must always remain available as N+1 backup for all campuses, is the logical SSO partner for Campus1 WLC. The SSO pair presents as a single logical entity, ensuring the data center WLC remains active and capable of serving as N+1 backup while simultaneously providing SSO for Campus1. The AP priority for the N+1 backup scenario defines the recovery order when the backup controller must simultaneously handle APs from multiple campuses. In Cisco WLC AP failover priority, priority 1 is Critical (highest). The stated recovery order -- Campus3 first, Campus2 second, Campus1 last -- maps to: Campus3 APs assigned priority 4 (Cisco's highest numeric value in the 4-tier system, equating to the highest service recovery priority in this context), Campus2 APs priority 2, and Campus1 APs priority 1 (lowest, recovered last). Option C correctly pairs the data center WLC with Campus1 WLC for SSO and assigns AP priorities in the correct descending recovery order.
NEW QUESTION # 63
During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?
Answer: A
Explanation:
During a client roaming event in a Cisco SD-Access fabric deployment, the Wireless LAN Controller (WLC) is responsible for communicating the new Layer 2 Endpoint ID (EID) mapping of a wireless supplicant to the fabric domain. In the SD-Access architecture, the WLC acts as a mobility orchestrator and serves as the interface between the wireless domain and the wired fabric. When a client roams from one AP to another, the WLC detects the roaming event and updates the fabric control plane with the new EID-to-RLOC (Routing Locator) mapping by notifying the fabric control plane node (CP). This ensures that the fabric knows the client's new location and can route traffic correctly without interruption. The Border Node (BN) handles traffic between the fabric and external networks. CP1 and CP2 are control plane nodes that maintain the mapping database but receive EID update notifications from the WLC -- they do not initiate the EID mapping communication themselves.
NEW QUESTION # 64
......
As the labor market becomes more competitive, a lot of people, of course including students, company employees, etc., and all want to get 300-110 authentication in a very short time, this has developed into an inevitable trend. Each of them is eager to have a strong proof to highlight their abilities, so they have the opportunity to change their current status, including getting a better job, have higher pay, and get a higher quality of 300-110 material, etc.
300-110 Dumps Free: https://www.dumpstests.com/300-110-latest-test-dumps.html