P.S. Kostenlose und neue H12-893_V1.0 Prüfungsfragen sind auf Google Drive freigegeben von ZertPruefung verfügbar: https://drive.google.com/open?id=1DuLC6CRXaRKnApsyAqL32N7NC1DmyxAk
Egal wie attraktiv die Vorstellung ist, ist nicht so überzeugend wie Ihre eigene Empfindung. Die Demo der Huawei H12-893_V1.0 Software können Sie auf unsere Webseite ZertPruefung einfach herunterladen. Unser erfahrenes Team bieten Ihnen die zuverlässigsten Unterlagen der Huawei H12-893_V1.0. Wenn Sie noch Fragen über Huawei H12-893_V1.0 Prüfungsunterlagen haben, können Sie sich auf unsere Website online darüber konsultieren. Onlinedienst bieten wir ganztägig.
| Section | Weight | Objectives |
|---|---|---|
| Data Center Network Planning and Deployment | 30% | - Network deployment and provisioning
- CloudFabric solution architecture
|
| Virtualization Technology Principles and Applications | 20% | - Huawei FusionCompute platform
|
| Data Center Network Operation and Maintenance | 25% | - Monitoring and troubleshooting - Intelligent O&M solutions
|
| VXLAN Technology Principles and Applications | 25% | - EVPN control plane technology - VXLAN fundamentals and evolution - VXLAN deployment and configuration |
ZertPruefung hat riesieges Expertenteam. Sie untersucht ständig nach ihren Kenntnissen und Erfahrungen die Huawei H12-893_V1.0 (HCIP-Data Center Network V1.0) IT-Zertifizierungsprüfung in den letzten Jahren. Ihre Forschungsergebnisse sind nämlich die Produkte von ZertPruefung. Die Fragen und Antworten zur Huawei H12-893_V1.0 Zertifizierungsprüfung von ZertPruefung sind den realen Fragen und Antworten sehr ähnlich. Sie können vielen helfen, ihren Traum zu verwirklichen. ZertPruefung verspricht, dass Sie die Huawei H12-893_V1.0 (HCIP-Data Center Network V1.0) Prüfung erfolgreich zu bestehen. Sie können beruhigt ZertPruefung in Ihren Warenkorb schicken. Mit ZertPruefung könen Sie Ihren Wunsch sofort erfüllen.
25. Frage
Which of the following statements are true about IP address planning for a DC? (Select All that Apply)
Antwort: A,B
Begründung:
IP address planning is critical in Huawei's CloudFabric data center networks to ensure scalability and efficiency. Let's evaluate each statement:
A). Service addresses refer to the IP addresses of servers, hosts, and gateways: This is true.
Service addresses are assigned to endpoints (servers, hosts) and gateways, distinguishing them from management or interconnection IPs in DC planning. TRUE.
B). IP addresses with a 24-bit mask are recommended for use as interconnection IP addresses:
This is false. A 24-bit mask (/24) is typically used for service subnets, while interconnection IPs (e.g., between spine and leaf) often use smaller masks (e.g., /31 or /30) to conserve addresses and align with point-to-point links. FALSE.
C). IP addresses must be contiguous. The routes with contiguous IP addresses can be summarized easily on a hierarchical network: This is false. Contiguity is desirable for summarization but not mandatory; non-contiguous blocks can still be managed with proper routing design (e.g., using BGP). FALSE.
D). IP address allocation should be simple and easy to manage, reflect network layers, and simplify network management and network expansion: This is true. Huawei recommends structured allocation (e.g., by layer or function) to streamline management and support future growth. TRUE.
Thus, A and D are true statements about IP address planning.
26. Frage
In Huawei CloudFabric Solution, iMaster NCE-Fabric uses SNMP to collect alarms and logs of physical devices and vSwitches.
Antwort: A
Begründung:
In Huawei's CloudFabric Solution, iMaster NCE-Fabric is the SDN controller responsible for managing physical devices and virtual switches (vSwitches). The method of data collection is critical for network monitoring.
SNMP Usage: Simple Network Management Protocol (SNMP) is a traditional method for collecting alarms and logs from network devices. However, Huawei's modern SDN controllers, including iMaster NCE-Fabric, primarily use telemetry (e.g., gRPC, NETCONF) for real-time data collection from physical devices and vSwitches. Telemetry provides higher efficiency and granularity compared to SNMP.
CloudFabric Approach: The solution leverages telemetry-based data collection, as documented in FabricInsight and iMaster NCE-Fabric guides, to gather alarms, logs, and performance metrics. SNMP may be supported as a legacy option but is not the primary method in this context.
The statement is FALSE (B) because iMaster NCE-Fabric predominantly uses telemetry, not SNMP, for collecting alarms and logs.
27. Frage
iMaster NCE-Fabric is Huawei's DC controller. Tenants can use it to create VPCs and deploy logical networks as required. After logical NEs are deployed, the corresponding network configurations are delivered to underlying network devices. Which of the following statements is false about the delivered network configurations?
Antwort: A
Begründung:
iMaster NCE-Fabric automates network configuration delivery in Huawei's CloudFabric. Let's evaluate each statement:
A . Logical switches are mainly used for Layer 3 communication between hosts on a VXLAN network. These switches correspond to Layer 3 gateway configurations such as VBDIF interface and VPN instance configurations on physical devices: This is false. Logical switches in iMaster NCE-Fabric primarily handle Layer 2 communication (e.g., bridging within a VNI), corresponding to Bridge Domains (BDs) and Layer 2 VNIs. Layer 3 communication is managed by gateways, not logical switches. FALSE.
B . An end port represents an online host. It corresponds to the traffic encapsulation type (whether a VLAN tag is carried) configured on a Layer 2 sub-interface of a physical device: This is true. End ports map to host connections, with encapsulation (VLAN-tagged or untagged) configured on sub-interfaces. TRUE.
C . A logical port is equivalent to an independent physical port that is used by a host to connect to a VXLAN network. It corresponds to the Layer 2 sub-interface configuration on a physical device: This is true. Logical ports represent host connections, mapped to Layer 2 sub-interfaces for VXLAN access. TRUE.
D . Logical switches are mainly used for Layer 2 communication between hosts on a VXLAN network. These switches correspond to BD and Layer 2 VNI configurations on physical devices: This is true. Logical switches facilitate Layer 2 connectivity, aligning with BD and VNI settings. TRUE.
Thus, A is the false statement because logical switches are for Layer 2, not Layer 3, communication.
28. Frage
Which of the following technologies are Layer 4 load balancing technologies? (Select All that Apply)
Antwort: B,C,D
Begründung:
Layer 4 load balancing operates at the transport layer (OSI Layer 4), using TCP/UDP protocols to distribute traffic based on information like IP addresses and port numbers, without inspecting the application-layer content (Layer 7). Let's evaluate each option:
A . Nginx: Nginx is a versatile web server and reverse proxy that supports both Layer 4 and Layer 7 load balancing. In its Layer 4 mode (e.g., with the stream module), it balances TCP/UDP traffic, making it a Layer 4 load balancing technology. This is widely used in Huawei's CloudFabric DCN solutions for traffic distribution. TRUE.
B . PPP (Point-to-Point Protocol): PPP is a Layer 2 protocol used for establishing direct connections between two nodes, typically in WAN scenarios (e.g., dial-up or VPNs). It does not perform load balancing at Layer 4 or any layer, as it's a point-to-point encapsulation protocol. FALSE.
C . LVS (Linux Virtual Server): LVS is a high-performance, open-source load balancing solution integrated into the Linux kernel. It operates at Layer 4, using techniques like NAT, IP tunneling, or direct routing to distribute TCP/UDP traffic across backend servers. It's a core Layer 4 technology in enterprise DCNs. TRUE.
D . HAProxy: HAProxy is a high-availability load balancer that supports both Layer 4 (TCP mode) and Layer 7 (HTTP mode). In TCP mode, it balances traffic based on Layer 4 attributes, making it a Layer 4 load balancing technology. It's commonly deployed in Huawei DCN environments. TRUE.
Thus, A (Nginx), C (LVS), and D (HAProxy) are Layer 4 load balancing technologies. PPP is not.
29. Frage
Which of the following statements is false about centralized gateway deployment using BGP EVPN?
Antwort: C
Begründung:
Centralized gateway deployment using BGP EVPN in Huawei's data center networks (e.g., CloudFabric) involves a gateway handling Layer 3 routing for VXLAN overlays. Let's evaluate each statement:
A). When configuring a VTEP, you need to create a Layer 2 BD and bind a VNI to the Layer 2 BD:
A Bridge Domain (BD) is a Layer 2 broadcast domain in VXLAN, and a Virtual Network Identifier (VNI) is bound to it to segment traffic. This is a standard step when configuring a VXLAN Tunnel Endpoint (VTEP) to map the overlay network. TRUE.
B). A VXLAN tunnel is identified by a pair of VTEP IP addresses and can be established if the local and remote VTEP IP addresses are reachable to each other at Layer 3: VXLAN tunnels are established between VTEPs using their IP addresses as endpoints. Layer 3 reachability (e.g., via underlay routing) is required for tunnel establishment. TRUE.
C). When BGP EVPN is used to dynamically establish a VXLAN tunnel, the local and remote VTEPs first establish a BGP EVPN peer relationship and then exchange BGP EVPN routes to transmit VNI and VTEP IP address information. A VXLAN tunnel is then dynamically established between them: In BGP EVPN, VTEPs establish a BGP peer relationship, exchange routes (e.g., Type 2 for MAC/IP or Type 3 for multicast), and share VNI and VTEP IP details, enabling dynamic tunnel setup. TRUE.
D). When configuring a VTEP, you need to create an EVPN Instance in the Layer 2 BD and configure an RD for the local EVPN instance. You do not need to configure an RT: An EVPN Instance (EVI) is created within a BD, and a Route Distinguisher (RD) is configured to make routes unique. However, Route Targets (RTs) are also required to control route import/export between EVPN peers, ensuring proper VNI and route distribution. Stating that RT configuration is not needed is incorrect, as RTs are essential for BGP EVPN operation. FALSE.
Thus, D is the false statement because RT configuration is necessary in centralized gateway deployment with BGP EVPN.
30. Frage
......
Wenn Sie finden, dass eine große Herausforderung in Ihrem Berufsleben vor Ihnen steht, so müssen Sie die Huawei H12-893_V1.0 Zertifizierungsprüfung bestehen. ZertPruefung ist eine echte Website, die umfassende Kenntnisse zur Huawei H12-893_V1.0 Zertifizierungsprüfung besitzt. Wir bieten exklusive Online-Huawei H12-893_V1.0 Prüfungsfragen und Antworten. So ist es ganz leicht, die Prüfung zu bestehen. Unser ZertPruefung bietet Ihnen 100%-Pass-Garantie. ZertPruefung ist als Anführer der professionalen Zertifizierung anerkannt. Sie bietet die umfangreichste Zertifizierungsantworten. Sie werden feststellen, dass die Huawei H12-893_V1.0 Prüfungsfragen und Antworten zur Zeit die gründlichste, genaueste und neueste Praxis sind. Wenn Sie die Huawei H12-893_V1.0 Prüfungsfragen und Antworten haben, werden Sie sicher mehr sicher sein, die Prüfung zum ersten Mal zu bestehen.
H12-893_V1.0 Probesfragen: https://www.zertpruefung.ch/H12-893_V1.0_exam.html
P.S. Kostenlose und neue H12-893_V1.0 Prüfungsfragen sind auf Google Drive freigegeben von ZertPruefung verfügbar: https://drive.google.com/open?id=1DuLC6CRXaRKnApsyAqL32N7NC1DmyxAk