BONUS!!! KoreaDumps CWNA-109 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=16pv48-X9Q9XdBA1awBeSJlQqGRKL6lZ_
KoreaDumps는 가장 효율높은 CWNP CWNA-109시험대비방법을 가르쳐드립니다. 저희 CWNP CWNA-109덤프는 실제 시험문제의 모든 범위를 커버하고 있어 CWNP CWNA-109덤프의 문제만 이해하고 기억하신다면 제일 빠른 시일내에 시험패스할수 있습니다. 경쟁율이 심한 IT시대에 CWNP CWNA-109시험 패스만으로 이 사회에서 자신만의 위치를 보장할수 있고 더욱이는 한층 업된 삶을 누릴수도 있습니다.
| Certification Vendor: | CWNP |
|---|---|
| Exam Name: | CWNP Certified Wireless Network Administrator (CWNA) |
| Exam Number: | CWNA-109 |
| Available Languages: | English |
| Exam Duration: | 90 minutes |
| Passing Score: | 70% |
| Real Exam Qty: | 60 |
| Exam Format: | Drag-and-Drop, Multiple Choice, Multiple Select |
| Exam Price: | USD 250 |
| Certificate Validity Period: | 3 years |
| Related Certifications: | Certified Wireless Network Administrator (CWNA) |
| Sample Questions: | CWNP CWNA-109 Sample Questions |
| Exam Way: | Online (Proctored) or Authorized Testing Center |
| Pre Condition: | No formal prerequisites, but foundational networking knowledge recommended |
| Official Syllabus URL: | https://www.cwnp.com/certifications/cwna/ |
경쟁율이 점점 높아지는 IT업계에 살아남으려면 국제적으로 인증해주는 IT자격증 몇개쯤은 취득해야 되지 않을가요? CWNP CWNA-109시험으로부터 자격증 취득을 시작해보세요. CWNP CWNA-109 덤프의 모든 문제를 외우기만 하면 시험패스가 됩니다. CWNP CWNA-109덤프는 실제 시험문제의 모든 유형을 포함되어있어 적중율이 최고입니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
질문 # 101
You are troubleshooting a problem with interference from a non-802.11 device. Given that the device is not a WLAN device, you cannot use a protocol analyzer and have chosen to use a spectrum analyzer. You want to view the signal from the interfering device over time to see the activity that is generating.
What common spectrum analyzer view should you use for this analysis?
정답：A
설명：
The common spectrum analyzer view that you should use for this analysis is the Waterfall/Spectrogram view. The Waterfall/Spectrogram view shows the signal from the interfering device over time on a three-dimensional graph. The x-axis represents frequency, the y- axis represents time, and the z-axis represents amplitude or power. The color of each pixel indicates the signal strength at a given frequency and time. The Waterfall/Spectrogram view can help you identify the characteristics of the interference source, such as its frequency range, duty cycle, modulation type, and pattern.
질문 # 102
The requirements for a WLAN you are installing state that it must support unidirectional delays of less than
150 ms and the signal strength at all receivers can be no lower than -67 dBm. What application is likely used that demands these requirements?
정답：B
설명：
VoIP (Voice over Internet Protocol) is an application that is likely used that demands the requirements of unidirectional delays of less than 150 ms and the signal strength at all receivers can be no lower than -67 dBm. VoIP is an application that allows users to make and receive voice calls over a network, such as the Internet or a WLAN. VoIP is a real-time and interactive application that requires high quality of service (QoS) to ensure good user experience and satisfaction. One of the QoS metrics for VoIP is delay, which is the time it takes for a voice packet to travel from the sender to the receiver. Delay can affect the quality and intelligibility of the voice conversation, as well as the synchronization and naturalness of the dialogue. The ITU-T G.114 recommendation suggests that the maximum acceptable one-way delay for VoIP should be less than 150 ms, as anything higher than that can cause noticeable degradation and annoyance to the users.
Another QoS metric for VoIP is signal strength, which is the measure of how strong the RF signal is at the receiver. Signal strength can affect the reliability and performance of the wireless connection, as well as the data rate and throughput of the VoIP traffic. The CWNA Official Study Guide recommends that the minimum signal strength for VoIP should be -67 dBm, as anything lower than that can cause packet loss, retries, jitter, and other issues that can impair the voice quality. References: 1, Chapter 10, page 398; 2, Section 6.1
질문 # 103
You are reconfiguring an AP to use the short guard interval. How long will the new guard interval duration be after the change?
정답：A
설명：
The short guard interval is an optional feature of 802.11n and 802.11ac that reduces the time between OFDM symbols from 800 ns to 400 ns. This can increase the data rate by about 11%, but also requires more precise timing and synchronization between the transmitter and the receiver. The short guard interval is only used when both the AP and the client support it and agree to use it.
질문 # 104
ABC Company is planning to install a new 802.11ac WLAN, but wants to upgrade its wired infrastructure first to provide the best user experience possible. ABC Company has hired you to perform the RF site survey.
During the interview with the network manager, you are told that the new Ethernet edge switches will support VoIP phones and 802.11 access points, both using 802.3 PoE.
After hearing this information, what immediate concerns do you note?
정답：D
설명：
An immediate concern that you note after hearing this information is that the power budget in the edge switches must be carefully planned and monitored based on the number of supported PoE devices. PoE stands for Power over Ethernet and is a technology that allows Ethernet switches to deliver power along with data to devices such as VoIP phones and 802.11 access points. PoE devices are classified into different classes based on their power consumption and output. The edge switches have a limited power budget that determines how many PoE devices they can support simultaneously. If the power budget is exceeded, some PoE devices may not receive enough power or may shut down unexpectedly. Therefore, it is important to plan and monitor the power budget in the edge switches based on the number and class of PoE devices connected to them. Using Ether-channel, placing switches in optimal locations, or avoiding distortion are not immediate concerns related to PoE devices. References: [CWNP Certified Wireless Network Administrator Official Study Guide:
Exam CWNA-109], page 234; [CWNA: Certified Wireless Network Administrator Official Study Guide:
Exam CWNA-109], page 224.
질문 # 105
An 802.11 WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB of loss. The cable is connected to an antenna with 16 dBi of gain. What is the power level at the Intentional Radiator?
정답：D
설명：
The power level at the Intentional Radiator (IR) is 250 mW. The IR is the point where the RF signal leaves the transmitter and enters the antenna system. To calculate the power level at the IR, we need to consider the output power level of the transmitter, the loss of the cable, and the gain of the antenna. The formula is:
Power level at IR (dBm) = Output power level (dBm) - Cable loss (dB) + Antenna gain (dBi) We can convert the output power level of 50 mW to dBm by using the formula:
Power level (dBm) = 10 * log10(Power level (mW))
Therefore, 50 mW = 10 * log10(50) = 16.99 dBm
We can plug in the values into the formula:
Power level at IR (dBm) = 16.99 - 3 + 16 = 29.99 dBm
We can convert the power level at IR from dBm to mW by using the inverse formula:
Power level (mW) = 10
2026 KoreaDumps 최신 CWNA-109 PDF 버전 시험 문제집과 CWNA-109 시험 문제 및 답변 무료 공유: https://drive.google.com/open?id=16pv48-X9Q9XdBA1awBeSJlQqGRKL6lZ_