To improve our productsโ quality we employ first-tier experts and professional staff and to ensure that all the clients can pass the test we devote a lot of efforts to compile the NSE6_FNC_AD-7.6 study materials. Even if you unfortunately fail in the test we wonโt let you suffer the loss of the money and energy and we will return your money back at the first moment. After you pass the NSE6_FNC_AD-7.6 test you will enjoy the benefits the certificate brings to you such as you will be promoted by your boss in a short time and your wage will surpass your colleagues.
| Section | Objectives |
|---|---|
| Topic 1: Deployment and Provisioning | - Configure access control on FortiNAC-F - Configure and monitor high availability (HA) - Configure FortiNAC-F security policies - Configure security automation |
| Topic 2: Concepts and Initial Configuration | - Model and organize infrastructure devices - Explain isolation networks and the configuration wizard |
| Topic 3: Network Visibility and Monitoring | - Troubleshoot network devices and device status - Manage guests and contractors - Configure device profiling - Use logging options |
| Topic 4: Integration | - Configure mobile device management (MDM) integration - Integrate with third-party devices using Syslog and SNMP traps - Configure and use FortiNAC-F Manager |
>> Download NSE6_FNC_AD-7.6 Fee <<
In order to pass the exam and fight for a brighter future, these people who want to change themselves need to put their ingenuity and can do spirit to work. More importantly, it is necessary for these people to choose the convenient and helpful NSE6_FNC_AD-7.6 test questions as their study tool in the next time. Because their time is not enough to prepare for the exam, and a lot of people have difficulty in preparing for the exam, so many people who want to pass the NSE6_FNC_AD-7.6 exam and get the related certification in a short time have to pay more attention to the study materials. In addition, best practice indicates that people who have passed the NSE6_FNC_AD-7.6 Exam would not pass the exam without the help of the NSE6_FNC_AD-7.6 reference guide. So the study materials will be very important for all people. If you also want to pass the exam and get the related certification in a short, the good study materials are the best choice for you. Now we are going to make an introduction about the NSE6_FNC_AD-7.6 exam prep from our company for you.
NEW QUESTION # 26
When configuring isolation networks in the configuration wizard, why does a layer 3 network typo allow for mora than ono DHCP scope for each isolation network typo?
Answer: C
Explanation:
In FortiNAC-F, theLayer 3 Network typeis specifically designed for deployments where the isolation networks-such as Registration, Remediation, and Dead End-are separated from the FortiNAC appliance ' s service interface (port2) by one or more routers. This architecture is common in large, distributed enterprise environments where endpoints in different physical locations or branches must be isolated into subnets that are local to their respective network equipment.
The reason the Configuration Wizard allows for more than one DHCP scope for a single isolation network type (state) is thatthere can be more than one isolation network of each typeacross the infrastructure. For instance, if an organization has three different sites, each site might require its own unique Layer 3 registration subnet to ensure efficient routing and to accommodate local IP address management. By allowing multiple scopes for the " Registration " state, FortiNAC can provide the appropriate IP address, gateway, and DNS settings to a rogue host regardless of which site ' s registration VLAN it is placed into.
When an endpoint is isolated, the network infrastructure (via DHCP Relay/IP Helper) directs the DHCP request to the FortiNAC service interface. FortiNAC then identifies which scope to use based on the incoming request ' s gateway information. This flexibility ensures that the system is not limited to a single flat subnet for each isolation state, supporting a scalable, multi-routed network topology.
" Multiple scopes are allowed for each isolation state (Registration, Remediation, Dead End, VPN, Authentication, Isolation, and Access Point Management). Within these scopes, multiple ranges in the lease pool are also permitted... This configWizard option is used when Isolation Networks are separated from the FortiNAC Appliance ' s port2 interface by a router. " -FortiNAC-F Configuration Wizard Reference Manual:
Layer 3 Network Section.
NEW QUESTION # 27
An administrator wants to continually monitor endpoints for the existence of a specific registry key and the status of a required security service.
Which two requirements must be in place for the administrator to use FortiNAC-F compliance monitors? (Choose two.)
Answer: C,D
Explanation:
Compliance monitors require the persistent agent to continuously evaluate endpoint conditions such as registry keys and service status. A custom scan must be defined to specify the exact registry key and security service checks that the monitor will assess on the endpoint.
NEW QUESTION # 28
Refer to the exhibits.
What would happen if the highlighted port with connected hosts was placed in both the Forced Registration and Forced Remediation port groups?
Answer: D
Explanation:
A FortiNAC-F port can belong to both Forced Registration and Forced Remediation system groups .
These enforcement groups are not mutually exclusive and are not evaluated according to a ranking between the groups. Instead, FortiNAC-F determines the applicable enforcement according to the state of each host connected through that point of connection .
The Study Guide explicitly demonstrates overlapping enforcement membership: all Building 1 ports are members of Forced Registration , while second- and third-floor ports are additionally members of Forced Remediation .
FortiNAC-F then applies state-specific logic:
* A rogue/unregistered host on the port satisfies Forced Registration and is moved to the Registration isolation network.
* An at-risk host on the same port satisfies Forced Remediation and is moved to the Quarantine
/Remediation isolation network.
The exhibit is particularly relevant because the highlighted port shows Multiple Hosts connected. Each host is evaluated independently according to its state, so different enforcement mechanisms can apply to different endpoints sharing that port.
Therefore, placing the port in both groups enables both types of enforcement , depending on the state of the connected hosts.
Study Guide Reference: State-Based Control # System Groups; Logic to Determine Isolation; Non-Normal Status Device Evaluation , pp. 212-214 .
Top of Form
Bottom of Form
NEW QUESTION # 29
Refer to the exhibits. What would happen if the highlighted port with connected hosts was placed in both the Forced Registration and Forced Remediation port groups?
Answer: D
Explanation:
In FortiNAC-F, Port Groups are used to apply specific enforcement behaviors to switch ports.
When a port is assigned to an enforcement group, such as Forced Registration or Forced Remediation, FortiNAC-F overrides normal policy logic to force all connected adapters into that specific state. The exhibit shows a port (IF#13) with "Multiple Hosts" connected, which is a common scenario in environments using unmanaged switches or hubs downstream from a managed switch port.
According to the FortiNAC-F Administrator Guide, it is possible for a single port to be a member of multiple port groups. However, when those groups have conflicting enforcement actions--such as one group forcing a registration state and another forcing a remediation state--FortiNAC-F utilizes a ranking system to resolve the conflict. In the FortiNAC-F GUI under Network > Port Management > Port Groups, each group is assigned a rank. The system evaluates these ranks, and only the higher ranked enforcement group is applied to the port. If a port is in both a Forced Registration group and a Forced Remediation group, the group with the numerical priority (rank) will dictate the VLAN and access level assigned to all hosts on that port.
This mechanism ensures consistent behavior across the fabric. If the ranking determines that
"Forced Registration" is higher priority, then even a known host that is failing a compliance scan (which would normally trigger Remediation) will be held in the Registration VLAN because the port-level enforcement takes precedence based on its rank.
"A port can be a member of multiple groups. If more than one group has an enforcement assigned, the group with the highest rank (lowest numerical value) is used to determine the enforcement for the port. When a port is placed in a group with an enforcement, that enforcement is applied to all hosts connected to that port, regardless of the host's current state."
NEW QUESTION # 30
An organization has FortiNAC-F deployed and is using layer 3 isolation networks across multiple sites with firewalls.
At a minimum, which three protocols must be allowed between the isolation networks and FortiNAC-F? (Choose three.)
Answer: A,B,E
Explanation:
DHCP must be allowed so endpoints in the isolation network can obtain an IP address. DNS must be permitted so isolated hosts can resolve the FortiNAC-F hostname or required resources.
HTTP/HTTPS must be allowed to enable redirection and communication with the FortiNAC-F captive portal for registration and authentication.
NEW QUESTION # 31
......
BraindumpsPrep offers a full refund guarantee according to terms and conditions if you are not satisfied with our Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) product. You can also get free Fortinet Dumps updates from BraindumpsPrep within up to 365 days of purchase. This is a great offer because it helps you prepare with the latest Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) dumps even in case of real Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) exam changes. BraindumpsPrep gives its customers an opportunity to try its NSE6_FNC_AD-7.6 product with a free demo.
Exam NSE6_FNC_AD-7.6 Questions Answers: https://www.briandumpsprep.com/NSE6_FNC_AD-7.6-prep-exam-braindumps.html