2026 Latest ITPassLeader NSE6_EDR_AD-7.0 PDF Dumps and NSE6_EDR_AD-7.0 Exam Engine Free Share: https://drive.google.com/open?id=1ofATwXPHYUKlWS2NZa3DAXMcYgbPcTXX
Passing the Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) exam can be a challenging task, especially if you have a tight schedule. You need comprehensive exam questions to prepare well for the exam. In this article, we will introduce you to ITPassLeader Fortinet NSE6_EDR_AD-7.0 Exam Questions that offer relevant and reliable exam materials for your Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) exam preparation.
| Section | Weight | Objectives |
|---|---|---|
| FortiEDR System Architecture and Deployment | 25% | - API-based management operations - Multi-tenancy deployment - Installation and deployment process - Inventory management and system tools - Architecture and technical positioning |
| Events, Forensics, and Threat Hunting | 25% | - Security event and alert analysis - Threat hunting data interpretation - Threat hunting profiles and queries - Forensic analysis and incident investigation |
| Integration and Security Fabric | 15% | - Fortinet Security Fabric integration - FortiXDR deployment and configuration |
| Security Settings and Policies | 25% | - Playbooks creation and management - Security policies configuration - Communication control policies - Fortinet Cloud Service (FCS) integration |
| Monitoring and Troubleshooting | 10% | - Performance and issue diagnosis - System monitoring and health checks - Log and alert troubleshooting |
>> Knowledge NSE6_EDR_AD-7.0 Points <<
Many don't find real NSE6_EDR_AD-7.0 exam questions and face loss of money and time. ITPassLeader made an absolute gem of study material which carries actual Fortinet NSE6_EDR_AD-7.0 Exam Questions for the students so that they don't get confused in order to prepare for Fortinet NSE6_EDR_AD-7.0 Exam and pass it with a good score. The Fortinet NSE6_EDR_AD-7.0 practice test questions are made by examination after consulting with a lot of professionals and receiving positive feedback from them.
NEW QUESTION # 24
Which two statements correctly describe the IoT probing process on FortiEDR? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B and C .
The FortiEDR 7.0.0 Administration Guide explains that IoT device discovery continuously identifies newly connected non-workstation devices, such as printers, cameras, and media devices. During discovery, each relevant Collector periodically probes nearby neighboring devices. The guide states that nearby devices usually respond by providing information about themselves, including the device/host name and IP address .
This directly supports option B .
Option C is also correct because the guide states that Collectors in degraded , disabled , or isolated states do not take part in the IoT probing process. It also says FortiEDR uses the most powerful Collectors in each subnet and excludes weaker Collectors, including disabled and degraded Collectors.
Option A is wrong because the guide explicitly says Collectors running on servers do not take part in IoT probing. Option D is wrong because IoT probing is not described as deep packet inspection of all neighboring traffic; it is a discovery/probing process used to identify nearby devices and collect basic device information.
=========
NEW QUESTION # 25
Refer to the exhibit.
Based on the exhibit, which statement about this threat hunting query is true? (Choose one answer)
Answer: B
Explanation:
The correct answer is A .
The exhibit shows a FortiEDR Threat Hunting saved query using RemotePort:3389, scoped to a specific device, with Scheduled Query enabled, classification set to Suspicious , and a repeat interval of 15 minutes .
TCP port 3389 is the standard RDP port, so the query is designed to detect RDP-related network activity for the selected endpoint.
The FortiEDR guide states that saving a Threat Hunting query can define it as a scheduled query to automate threat detection. It further states that when a scheduled query runs and detects matches, a security event is automatically created in the Incidents tab , and notifications are sent according to the security event configuration.
Option B is too absolute and therefore wrong. The specific query shown uses a network field, but Threat Hunting itself can search activity events across files, registry, network, processes, and event logs. Option C is wrong because the Community Query checkbox is not selected, so it is not configured as a shared community
/global query. The guide states that Community Query must be selected to share the query with the FortiEDR community, including other organizations.
Option D is wrong because a scheduled Threat Hunting query generates an incident; it does not automatically block RDP unless additional playbook actions are configured. The guide says scheduled queries generate security events and may trigger configured playbook actions, but the query itself is not a blocking control.
=========
NEW QUESTION # 26
You added three new applications to FortiEDR using only the Path attribute. What are two expected outcomes of this configuration? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and B .
The FortiEDR 7.0.0 Administration Guide states that newly added applications are disabled by default , which means they are not blocked unless enabled. The guide further explains that the default state can be changed by enabling the Enable Default application state option in the Application Control Manager settings. Therefore, option A is correct.
Option B is also correct because Application Control allows an application to be defined by Hash or by any combination of File Name / Path / Signer . The guide says that the Path field specifies the path to the executable file of the application to be blocked. When using path-based matching, the enforcement is tied to the specified path criteria, not to every possible location of the same file.
Option C is wrong because the file name does not also need to match when only the Path attribute is used.
Option D is wrong because blocking all instances regardless of location applies when only the File Name field is used, not when the match is path-specific. The guide explicitly states that if only the File Name field is filled, the application is blocked no matter where the executable appears.
NEW QUESTION # 27
Refer to the exhibits.
You are attempting to move a collector into the High Security Collector Group for isolation but encounter an error in the API request as shown in the exhibit. To successfully isolate the collector, which API parameter must you correct? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Set the organization parameter to Default .
From the first exhibit, the API query result for the Collector shows:
* Collector name: Desktop-PC
* Collector group name: Engineering
* Organization: Default
* State: Running
But in the second exhibit, the API request is using:
* organization = Fortinet-Training
* collectors = Desktop-PC
* targetCollectorGroup = High Security Collector Group
That organization value is wrong. The Collector belongs to the Default organization, so the API request must reference the Collector's actual organization. Otherwise FortiEDR cannot locate or move that Collector under the organization specified in the request.
The FortiEDR guide confirms that Collector Groups are used to assign different FortiEDR policies to different Collectors, and that Collectors can be moved between groups/organizations in the Inventory workflow. In Hoster view, FortiEDR shows Collectors from all organizations and allows moving Collectors between organizations, but the organization context must match the Collector being managed.
Option B is wrong because the exhibit shows the API request is authorized; the failure is a 400 Bad Request , not an authentication failure. Option C is wrong because the endpoint shown is already a move/update operation using PUT, and the issue is not the HTTP method. Option D is wrong because Engineering is the current Collector Group. The goal is to move the Collector to High Security Collector Group , so changing the target back to Engineering would not isolate or harden the Collector.
=========
NEW QUESTION # 28
Refer to the exhibits.
The application policy logs and application details are shown. Collector C8092231196 is a member of the Finance group. In this scenario, what must you do to block the FileZilla application? (Choose one answer)
Answer: D
Explanation:
The correct answer is B. Deny the application in the Finance policy .
The FortiEDR 7.0.0 Administration Guide states that Communication Control policies define the actions to be taken for a given application or application version . It also states that each Communication Control policy applies to specific Collector Groups , and all devices that belong to those Collector Groups follow that policy. A Collector Group can be assigned to only one Communication Control policy.
In the exhibit, the Collector C8092231196 is stated to be a member of the Finance group. Therefore, to block FileZilla for that Collector, the application action must be set to Deny under the Finance policy , because that is the policy context that applies to the Collector's group.
The guide also explains that you can modify a policy action for an application/version so that the selected application is explicitly set to Allow or Deny for the relevant policy. When modified this way, the Application
/Version Details area shows the action as manually changed and excluded from the original policy action.
Option A is wrong because assigning a Simulation Communication Control Policy to the DBA group does not affect a Collector in the Finance group. Option C is wrong because assigning the Finance policy to the DBA group would affect DBA Collectors, not the Finance Collector in the scenario. Option D is wrong because assigning the Finance policy to a broader group such as Default Collector Group is unnecessary and could over-broaden the policy impact. The precise action is to deny FileZilla in the policy that applies to the Collector's own group: Finance policy .
=========
NEW QUESTION # 29
......
As far as we are concerned, the key to quick upward mobility lies in adapting your excellent personality to the style of the organization you are working in. Our NSE6_EDR_AD-7.0 exam materials embrace much knowledge and provide relevant NSE6_EDR_AD-7.0 Exam bank available for your reference, which matches your learning habits and produces a rich harvest of the NSE6_EDR_AD-7.0 exam knowledge. As long as you buy our NSE6_EDR_AD-7.0 study guide, you will be benefited from it!
NSE6_EDR_AD-7.0 Simulation Questions: https://www.itpassleader.com/Fortinet/NSE6_EDR_AD-7.0-dumps-pass-exam.html
BONUS!!! Download part of ITPassLeader NSE6_EDR_AD-7.0 dumps for free: https://drive.google.com/open?id=1ofATwXPHYUKlWS2NZa3DAXMcYgbPcTXX