P.S. Free & New JN0-364 dumps are available on Google Drive shared by Prep4sureGuide: https://drive.google.com/open?id=1KB30isWNoFsXCxHRyfx9O3jwnqCPGD15
To pass Juniper JN0-364 certification exam seems to be a very difficult task. Having registered JN0-364 test, are you worrying about how to prepare for the exam? If so, please see the following content, I now tell you a shortcut through the JN0-364 Exam. The certification training dumps that can let you pass the test first time have appeared and it is Prep4sureGuide Juniper JN0-364 exam dumps. If you would like to sail through the test, come on and try it.
| Section | Weight | Objectives |
|---|---|---|
| Multiprotocol Label Switching (MPLS) | 12-18% | - Configuration and monitoring - Labels and LIB - Segment routing basics - Terminology and forwarding - LDP and RSVP |
| Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
| Protocol-Independent Routing | 10-15% | - Filter-based forwarding - Load balancing - Martian addresses - Static, aggregate, and generated routes - Routing instances and RIB groups |
| IPv6 | 8-12% | - Address types and format - Autoconfiguration - Static and dynamic routing - OSPFv3 and BGP for IPv6 |
| Spanning Tree Protocols | 8-12% | - STP, RSTP, MSTP, VSTP - Port roles and states - BPDU and protection features - Configuration and convergence |
| High Availability | 5-8% | - Graceful restart - NSR and GRES concepts - Nonstop active routing |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - Configuration and monitoring - Adjacencies and levels - Metrics and wide metrics - PDUs and TLVs |
| Border Gateway Protocol (BGP) | 20-25% | - Basic operation and message types - Policy and route filtering - Path selection and attributes - Configuration and troubleshooting - IBGP and EBGP |
| Open Shortest Path First (OSPF) | 15-20% | - Link-state database - Areas and router types - Configuration and troubleshooting - LSA types and operation |
| Layer 2 Bridging and VLANs | 8-12% | - Bridging concepts - Service provider switching features - VLANs and trunking |
Having been handling in this line for more than ten years, we can assure you that our JN0-364 study questions are of best quality and reasonable prices for your information. We offer free demos of the latest version covering all details of our JN0-364 Exam Braindumps available at present as representatives. So JN0-364 practice materials come within the scope of our business activities. Choose our JN0-364 learning guide, you won't regret!
NEW QUESTION # 30
Referring to the exhibit. Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
Answer: D
Explanation:
In the OSPF routing table output, prefixes are marked with different route types. An external prefix injected into OSPF is marked as 'Ext' (External) followed by a number that indicates whether it's an E1 or E2 route. The prefix 172.18.1.0/24 is marked as Ext2, which indicates that it is an external route that has been redistributed into OSPF from another routing protocol or static configuration.
NEW QUESTION # 31
What are three types of MPLS routers? (Choose three.)
Answer: A,D,E
Explanation:
In an MPLS network, the types of routers include ingress routers (where the MPLS labels are first applied), egress routers (where MPLS labels are removed), and transit routers (which switch MPLS- labeled packets through the MPLS network). Peering routers and aggregation routers are not specific types of MPLS routers; they are general network terms.
NEW QUESTION # 32
Which two protocols would be used for dynamic routing in IPv6 environments? (Choose two.)
Answer: B,C
Explanation:
IS-IS supports IPv6 routing using the Integrated IS-IS extensions, which allow the protocol to carry IPv6 reachability information using TLVs defined for IPv6.
BGP supports IPv6 routing through Multiprotocol BGP (MP-BGP) extensions that allow the exchange of IPv6 network prefixes between peers using the IPv6 address family.
NEW QUESTION # 33
Exhibit:
You have configured IPv4 and IPv6 in your network and all OSPF neighbors are established. You apply the configuration shown in the exhibit. Which statement is true in this scenario?
Answer: C
Explanation:
In a Juniper Networks environment running Junos OS, understanding the interaction between different versions of OSPF is essential for multi-protocol environments.OSPFv2(defined in RFC 2328) is the standard protocol used for routing IPv4 unicast traffic.OSPFv3(defined in RFC 5340) was originally developed to support IPv6 routing. However, OSPFv3 was later extended via RFC 5838 to support multiple address families (AF), allowing it to carry IPv4 unicast, IPv4 multicast, and other address types within a single OSPF instance.
According to Juniper technical documentation, Junos OS implements this multi-AF support in OSPFv3 through the use ofrealms. When the realm ipv4-unicast statement is configured under the [edit protocols ospf3] hierarchy, the OSPFv3 process becomes capable of calculating and advertising IPv4 routes.
In the provided exhibit, routerR2has a dual-protocol configuration. First, it is running standard OSPFv2, with the ge-0/0/1.0 interface (which is directly connected to the 172.16.2.0/24 network) participating in Area 0.
This ensures that the prefix is advertised as a standard IPv4 LSA to its neighbor,R1. Second, R2 is running OSPFv3 with the realm ipv4-unicast specifically enabled on that same ge-0/0/1.0 interface. Because of this realm, OSPFv3 also treats the 172.16.2.0/24 prefix as a reachable IPv4 destination and advertises it to R1 as an OSPFv3 IPv4-unicast LSA.
As a result, whenR1(which is also running both protocols) receives these routing updates, it will see the same destination prefix advertised by two different protocols. Its routing table (inet.0) will contain one entry learned from the OSPFv2 process and a second, separate entry learned from the OSPFv3 process. While the Junos Routing Engine will ultimately select one as the "active" route based on route preference (both protocols have a default preference of 10), both entries will technically exist within the Routing Information Base (RIB). This confirms that statementBis the correct description of the operational state of the network.
=========
NEW QUESTION # 34
What is the correct order of BGP attributes for active route selection?
Answer: A
Explanation:
BGP selects the active route based on an ordered list of attributes. The correct order is:
Weight (Cisco proprietary, not listed in the options)
Local Preference
Network (route) originated from the BGP router itself
Shortest AS Path
Lowest Origin Type
Lowest MED
eBGP over iBGP paths
Closest IGP Neighbor
Lowest Router ID
The next hop is checked for reachability but is not part of the BGP decision process for selecting the best path.
NEW QUESTION # 35
......
If you purchase our JN0-364 test torrent this issue is impossible. We hire experienced staff to handle this issue perfectly. We are sure that our products and payment process are surely safe and anti-virus. If you have any question about downloading and using our JN0-364 Study Tool, we have professional staff to remotely handle for you immediately, let users to use the Service Provider Routing and Switching, Specialist (JNCIS-SP) guide torrent in a safe environment, bring more comfortable experience for the user.
JN0-364 Online Training: https://www.prep4sureguide.com/JN0-364-prep4sure-exam-guide.html
P.S. Free & New JN0-364 dumps are available on Google Drive shared by Prep4sureGuide: https://drive.google.com/open?id=1KB30isWNoFsXCxHRyfx9O3jwnqCPGD15