Fast2test덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. Fast2test제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. Fast2test의API인증 API-SIEE덤프는 이해하기 쉽고 모든API인증 API-SIEE시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
| Certification Vendor: | American Petroleum Institute (API) |
|---|---|
| Exam Name: | API Source Inspector Electrical Equipment (SIEE) |
| Exam Number: | SIEE |
| Related Certifications: | API Source Inspector Rotating Equipment (SIRE) API Source Inspector Fixed Equipment (SIFE) |
| Exam Duration: | 195 minutes |
| Exam Format: | Closed-book, Multiple Choice |
| Real Exam Qty: | 110 (100 scored + 10 unscored pretest) |
| Available Languages: | English |
| Certificate Validity Period: | 3 years |
| Exam Registration: | API ICP Certification Portal |
| Sample Questions: | API API-SIEE Sample Questions |
| Exam Way: | Computer-based / remote proctored exam (scheduled exam windows) |
| Pre Condition: | Prequalification required; relevant electrical or inspection experience in industrial/petroleum environments is typically expected |
| Official Syllabus URL: | https://www.api.org/products-and-services/individual-certification-programs/certifications/apisiee |
Fast2test연구한 전문API API-SIEE인증시험을 겨냥한 덤프가 아주 많은 인기를 누리고 있습니다. Fast2test제공되는 자료는 지식을 장악할 수 있는 반면 많은 경험도 쌓을 수 있습니다. Fast2test는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다. 비록API API-SIEE인증시험은 어렵지만 우리Fast2test의 문제집으로 가이드 하면 여러분은 아주 자신만만하게 응시하실 수 있습니다. 안심하시고 우리 Fast2test가 제공하는 알맞춤 문제집을 사용하시고 완벽한API API-SIEE인증시험 준비를 하세요.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
| 주제 7 |
|
질문 # 100
Any reports, such as Material Test Reports, that have been modified or corrected should be:
정답：C
설명：
The correct answer isAbecause, in source inspection practice, a corrected or revised report isnot automatically invalidif the change is properly explained, traceable, and supported by the manufacturer's quality system. The source inspector's role is to review documentation for accuracy, traceability, consistency with specifications, and objective evidence of compliance. If a Material Test Report or similar record has been modified, the proper action is to obtainclarification, verify the reason for the correction, and confirm that the revised record remains authentic and controlled. Immediate rejection is too extreme unless there is evidence of falsification, loss of traceability, or unauthorized alteration.
This aligns with the API guide's emphasis onsource inspection and quality surveillance activitiesrather than arbitrary dispositioning, and on verifying compliance through documented evidence and surveillance of the manufacturer's process. The guide is intended as a resource for the API Source Inspector Electrical Equipment body of knowledge, which includes document review, inspection planning, surveillance, and record verification as part of the overall source inspection process. Therefore, corrected reports should beaccepted after clarification and verification, not rejected solely because they were revised.
질문 # 101
According to API 541, determination of efficiency and power, locked-rotor current, power factor, torque, full- load current and slip are some of the tests verified when performing a:
정답：B
설명：
The correct answer isAbecause the group of performance items listed in the question-efficiency, power, locked-rotor current, power factor, torque, full-load current, and slip-belongs to acomplete testfor large electric motors under API 541 practice. A complete test is broader than a routine production test because it verifies the motor's full performance characteristics, not just basic manufacturing acceptability. These measurements are used to confirm that the motor meets its guaranteed operating and starting characteristics and that its electrical and mechanical performance aligns with the design and specification requirements.
Aroutine testis normally more limited and is intended to confirm standard production quality on each motor, such as winding resistance, insulation checks, no-load current, vibration, or similar baseline acceptance items.
Adesign testis generally associated with proving a design type rather than verifying all ordered motor performance data on a specific unit. Acompliance testis not the best match for this defined set of performance determinations. In API-aligned source inspection, these performance verifications are associated with thecomplete test, makingoption Athe correct answer.
질문 # 102
In addition to maximum rated voltage, manufacturer's name, trademark and AWG, which of the following markings is required for all conductors and cables?
정답：B
질문 # 103
According to API 541, totally enclosed machines TEFC, TEPV, TEWAC, and TEAAC are equipped with which of the following?
정답：C
설명：
The correct answer isA. Under API 541,totally enclosed machinessuch asTEFC, TEPV, TEWAC, and TEAACare required to have alow-point drain. This requirement exists because enclosed motors can accumulatecondensation or moistureinside the housing due to temperature changes, shutdown periods, ambient humidity, or cooling system operation. If that moisture is not removed, it can degrade insulation, promote corrosion, contaminate internal parts, and shorten motor life. The low-point drain provides a controlled path for accumulated liquid to escape from the lowest part of the enclosure.
The other options are not universally required for all these enclosure types. Aheat exchanger cooling fanmay apply only to certain cooling arrangements, not to every totally enclosed machine listed.Bearing RTDsmay be specified for monitoring on many large motors, but they are not the defining common feature identified by this question.Surge protectorsare auxiliary protective devices and are not the standard enclosure-related requirement here. In source inspection practice, the inspector should verify that the motor enclosure includes the requireddrain provisions, that they are properly located, and that they conform to the approved design and specification.
질문 # 104
The cosine of the difference in phase angle between voltage and current is:
정답：B
설명：
The correct answer isA, power factor. In AC electrical systems, the phase relationship betweenvoltageandcurrentis an important indicator of how effectively electrical power is being used.
Thecosine of the phase angle differencebetween voltage and current is called thepower factor.
Mathematically, power factor expresses the ratio ofreal power, which performs useful work, toapparent power, which is the total power supplied to the circuit. When voltage and current are in phase, the cosine value is 1 and the power factor is unity. When they are out of phase due to inductive or capacitive effects, the power factor becomes less than 1.
From a source inspection and quality surveillance standpoint, understanding power factor is important when reviewing electrical test data, motor performance, transformer loading characteristics, and system efficiency information.Real poweris measured in watts,apparent powerin volt-amperes, andmhois a unit of conductance, so none of those terms define the cosine of the phase angle itself. Therefore, the correct technical term for this cosine relationship ispower factor.
질문 # 105
......
API-SIEE인증시험덤프: https://kr.fast2test.com/API-SIEE-premium-file.html