P.S. Free & New JN0-481 dumps are available on Google Drive shared by PassLeaderVCE: https://drive.google.com/open?id=1fpx1orXJKUThWHGOCTvhFYEpz5xWFyul
It is a universally accepted fact that the JN0-481 exam is a tough nut to crack for the majority of candidates, but there are still a lot of people in this field who long to gain the related certification so that a lot of people want to try their best to meet the challenge of the JN0-481 Exam. A growing number of people know that if they have the chance to pass the exam, they will change their present situation and get a more decent job in the near future.
| Section | Objectives |
|---|---|
| EVPN-VXLAN Technologies | - VXLAN data plane encapsulation - EVPN control plane fundamentals - EVPN Type 2 and Type 5 routes |
| Operations and Troubleshooting | - Monitoring and verifying EVPN-VXLAN fabrics - Troubleshooting routing and switching issues |
| Data Center Architecture Fundamentals | - Layer 2 and Layer 3 data center fabric concepts - Spine-leaf (Clos) architecture design - Redundancy and high availability principles |
| Automation and Programmability | - Junos automation basics (scripts, commit scripts) - Network configuration consistency and automation concepts |
| Data Center Routing Protocols | - BGP in EVPN-based fabrics - OSPF and IS-IS in data center environments - Underlay vs overlay network design |
| Junos Data Center Switching | - VLANs, trunking, and bridging concepts - QFX switch configuration and operation - Spanning Tree and alternatives in DC designs |
As is known to us, our company is professional brand established for compiling the JN0-481 study materials for all candidates. The JN0-481 study materials from our company are designed by a lot of experts and professors of our company in the field. We can promise that the JN0-481 study materials of our company have the absolute authority in the study materials market. We believe that the study materials designed by our company will be the most suitable choice for you. You can totally depend on the JN0-481 Study Materials of our company when you are preparing for the exam.
NEW QUESTION # 44
You have an EVPN-VXLAN data center IP fabric, with all single-homed hosts/servers. Which two EVPN route types are present in this scenario? (Choose two.)
Answer: A,D
Explanation:
In an EVPN-VXLAN fabric where all hosts are single-homed (each endpoint is attached to only one leaf/VTEP), the EVPN control plane still needs to advertise endpoint reachability and enable BUM handling across the overlay. Two EVPN route types are fundamental in this case: Type 2 and Type 3.
EVPN Route Type 2 (MAC/IP Advertisement) is used to advertise learned MAC addresses and, optionally, associated IP addresses for endpoints connected to the local leaf. This enables remote VTEPs to learn where a given host resides (which VTEP to send unicast traffic to) without relying on data-plane flooding for MAC learning. In Junos v24.4 EVPN-VXLAN deployments, Type 2 routes are the core mechanism for distributing endpoint reachability (MAC and MAC+IP bindings) within the EVPN domain.
EVPN Route Type 3 (Inclusive Multicast Ethernet Tag / IMET) is used to establish the flooding scope for BUM traffic in EVPN-VXLAN. In VXLAN fabrics that use ingress replication (common in data centers), Type 3 routes help build the list of remote VTEPs that should receive replicated BUM traffic for a given segment.
By contrast, Type 4 (Ethernet Segment) routes are associated with EVPN multihoming (ESI-based) and DF election; with only single-homed hosts, Type 4 is not required. Type 7 is not part of the baseline single-homed EVPN-VXLAN host advertisement set in this context.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/concept/evpn-bgp-multihoming-overview.html
https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/topic-map/assisted-replication-evpn.html
NEW QUESTION # 45
You are creating a new security policy using Juniper Apstra.
Referring to the exhibit, which application point should you select to allow or deny traffic to or from a particular VRF?
Answer: C
Explanation:
In Juniper Apstra, a Routing Zone corresponds to a VRF. If you want to create a security policy that controls traffic to or from a particular VRF, you must select Routing Zone as the application point. This ensures the policy is applied at the VRF level rather than to specific endpoints or virtual networks.
NEW QUESTION # 46
You want to assign resources to your blueprint during the deployment phase. In this scenario, which statement is correct?
Answer: B
Explanation:
In Apstra 5.1, "resources" (such as ASNs, IP addressing, and VNIs) are allocated to blueprint elements using resource pools. The blueprint does not require you to manually craft every individual resource value; instead, Apstra's workflow is to have you indicate which pool(s) should be used for the blueprint, and then Apstra automatically pulls and assigns the required values. This automation is fundamental to Apstra's intent-based model: once the blueprint knows which pools to consume, it can deterministically allocate unique values across the fabric and generate consistent Junos configuration for the assigned devices.
Option D best matches this behavior because it reflects the documented mechanism: required resources are automatically pulled from the selected pool(s) and assigned in a fast, bulk transaction. This is what enables repeatable deployments-especially in EVPN-VXLAN data center fabrics-because resource collisions and manual tracking are avoided.
Option A is not the defining prerequisite for resource assignment; device profile and device assignment are important overall build steps, but the correctness of resource assignment is tied to pool selection and availability rather than being strictly gated by those tasks. Option B is incorrect because pools can be created and managed beyond only "global" contexts, and Apstra also supports creating additional pools from within the blueprint when needed. Option C is misleading because resources are governed by pools and allocation, not only by manual creation under a single tab.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/resources.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/freeform-resource-management.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/ref/resource-pools-api.html
NEW QUESTION # 47
You are attempting to attach the server connected to the my_border_001_leaf1 node's ge-0/0/5 interface to the finance-app virtual network.
Referring to the exhibit, what would you do to solve the problem?
Answer: A
Explanation:
In Apstra 5.1, servers are modeled as Generic Systems and must be represented in the blueprint topology so that Apstra can bind an endpoint (the server) to a specific switch interface and then apply the intended connectivity template / virtual network attachment. In the exhibit, the interface ge-0/0/5 on my_border_001_leaf1 is shown as missing from the assignment workflow, which indicates that Apstra does not currently have an endpoint object connected to that port in the blueprint's staged physical topology (or that the port is not presented as an eligible connectivity point for server attachment).
The correct remediation is to add a Generic System connected to my_border_001_leaf1 ge-0/0/5 in Staged > Physical > Topology, thereby creating a modeled server link on that interface. Once the Generic System exists and the interface is a recognized server-facing connectivity point, you can assign the Tagged VXLAN "finance-app" connectivity template (or the VN assignment action driven by that template) to the server-facing interface and then commit the staged changes.
Changing "deploy mode" may affect whether Apstra actively configures a generic system-facing link, but it does not solve a missing interface in the topology model. Likewise, allocating an IP pool is unrelated to making the port available for attachment, and assigning the VN to the switch node is not how server interfaces are attached in this workflow.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/topic-map/internal-generic-system-create.html
https://www.juniper.net/documentation/us/en/software/apstra5.0/apstra-user-guide/topics/topic-map/virtual-network-assignment-update.html
https://cloudlabs.apstra.com/labguide/Cloudlabs/6.0.0/test-drive-guide/lab1-junos-11_adding-gs.html
NEW QUESTION # 48
Which three statements are correct about property sets? (Choose three.)
Answer: A,B,C
Explanation:
Property sets can be automatically imported with a configlet to provide reusable configuration variables.
They use key/value pairs for variable substitution within configlets, enabling templated configuration.
A single configlet can reference multiple property sets, allowing flexible and modular configuration inputs.
NEW QUESTION # 49
......
If you want to pass your exam and get your certification, we can make sure that our JNCIS-DC guide questions will be your ideal choice. Our company will provide you with professional team, high quality service and reasonable price. In order to help customers solve problems, our company always insist on putting them first and providing valued service. We deeply believe that our JN0-481 question torrent will help you pass the exam and get your certification successfully in a short time. Maybe you cannot wait to understand our JN0-481 Guide questions; we can promise that our products have a higher quality when compared with other study materials. At the moment I am willing to show our JN0-481 guide torrents to you, and I can make a bet that you will be fond of our products if you understand it.
JN0-481 Reliable Exam Braindumps: https://www.passleadervce.com/JNCIS-DC/reliable-JN0-481-exam-learning-guide.html
BONUS!!! Download part of PassLeaderVCE JN0-481 dumps for free: https://drive.google.com/open?id=1fpx1orXJKUThWHGOCTvhFYEpz5xWFyul