DOWNLOAD the newest SurePassExams HPE6-A85 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1LLzHuJyPrgGSfu3iVD8Au1a8m6f0zW0c
HPE6-A85 soft test simulator is popular by many people since it can be applied in nearly all electronic products. If you download and install on the personal computer first time, and then copy to your USB flash disk. You can use HPE6-A85 soft test simulator on any other computer as you like offline. Besides, it supports Mobil and Ipad. If you don't delete it, you can use and practice forever. HP HPE6-A85 soft test simulator can set timed exam and simulate the real scene with the real test, so that you can practice like the real test many times.
| Section | Weight | Objectives |
|---|---|---|
| Describe Aruba Switching Solutions | 25% | - Aruba CX switching features
|
| Describe Network Fundamentals | 15% | - OSI model and TCP/IP fundamentals
|
| Describe Aruba Management Solutions | 15% | - Network management platforms
|
| Describe Network Security Fundamentals | 15% | - Basic security concepts
|
| Troubleshooting and Maintenance | 10% | - Basic troubleshooting methodology
|
| Describe Wireless Networking Fundamentals | 20% | - Wireless LAN concepts
|
SurePassExams is obliged to give you three months of free update checks to ensure the validity and accuracy of the Aruba Certified Campus Access Associate Exam (HPE6-A85) exam dumps. We also offer you a 100% money-back guarantee, in the very rare case of failure or unsatisfactory results. This puts your mind at ease when you are Aruba Certified Campus Access Associate Exam (HPE6-A85) exam preparing with us.
NEW QUESTION # 10
What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs, and other PoE devices?
Answer: C
Explanation:
Profiling is a feature that allows Aruba switches to automatically identify and classify devices connected to them based on various attributes such as MAC address, DHCP options, LLDP information, etc. Profiling can be used to dynamically set the PoE priority on a switch port based on the device type and power requirements. For example, an IP camera may have a higher PoE priority than a printer or a PC. Profiling can also be used to apply other configuration settings such as VLANs, ACLs, QoS, etc. based on the device profile.
NEW QUESTION # 11
What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?
Answer: D
Explanation:
Explanation
The correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1 is ip-route 10.2.10.0/24 172.16.1.1 . This command specifies the destination network address (10.2.10.0) and prefix length (/24) and the next-hop address (172.16.1 .1) for reaching that network from the switch. The other commands are either incorrect syntax or incorrect parameters for adding a static route.
References:https://www.arubanetworks.com/techdocs/AOS-CX_10_04/NOSCG/Content/cx-noscg/ip-routing/sta
NEW QUESTION # 12
What are the characteristics of VSF? (Choose two.)
Answer: C,E
Explanation:
VSF combines multiple physical switches into a single logical device, simplifying management and design. It uses standard Ethernet interfaces (such as 10G/25G/50G) for stacking links instead of proprietary cables.
NEW QUESTION # 13
Two independent ArubaOS-CX 6300 switches with Spanning Tree (STP) settings are interconnected with two cables between ports 1/1/1 and 1/1/2 All four ports have "no shutdown" and "no routing" commands How will STP forward or discard traffic on these ports?
Answer: C
Explanation:
The way that STP Spanning Tree Protocol. STP is a network protocol that ensures a loop-free topology for any bridged Ethernet local area network by preventing redundant paths between switches or bridges from creating loops that cause broadcast storms, multiple frame transmission, and MAC table instability. STP creates a logical tree structure that spans all of the switches in an extended network and blocks any redundant links that are not part of the tree from forwarding data packets3. will forward or discard traffic on these ports is as follows:
* STP will elect a root bridge among the two switches based on their bridge IDs, which are composed of a priority value and a MAC address. The switch with the lower bridge ID will become the root bridge and will forward traffic on all its ports.
* STP will assign a role and a state to each port on both switches based on their port IDs, which are composed of a priority value and a port number. The port with the lower port ID will become the designated port and will forward traffic, while the port with the higher port ID will become the alternate port and will discard traffic.
* In this scenario, since both switches have two cables connected between ports 1/1/1 and 1/1/2, there will be two possible paths between them, creating a loop. To prevent this loop, STP will block one of these paths by discarding traffic on one of the ports on each switch.
* Assuming that both switches have the same priority value (default is 32768), the switch with the lower MAC address will have the lower bridge ID and will become the root bridge. The root bridge will forward traffic on both ports 1/1/1 and 1/1/2.
* Assuming that both ports have the same priority value (default is 128), port 1/1/1 will have a lower port ID than port 1/1/2 on both switches because it has a lower port number. Port 1/1/1 will become the designated port and will forward traffic, while port 1/1/2 will become the alternate port and will discard traffic.
* Therefore, the switch with the lower MAC address will discard traffic on one port (port 1/1/2), while the switch with the higher MAC address will also discard traffic on one port (port 1/1/2).
References: 3 https://en.wikipedia.org/wiki/Spanning_Tree_Protocol
NEW QUESTION # 14
What is an advantage of using Layer 2 MAC authentication?
Answer: C
Explanation:
Layer 2 MAC authentication is a method of authenticating devices based on their MAC addresses without requiring any client-side configuration or credentials. The switch sends the MAC address of the device to an authentication server such as ClearPass or RADIUS, whichchecks if the MAC address is authorized to access the network. If yes, the switch grants access to the device based on the assigned role and policies. If no, the switch denies access or redirects the device to a captive portal for further authentication.References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/1-overview
/mac-authentication.htm
NEW QUESTION # 15
......
Normally IT workers have two purposes to test for certification: one is just for certification as of job demand; two is setting one goal for striving. Why do you try our HPE6-A85 new exam guide materials? Our products are valid tested by more than 6000 candidates and can help you clear exam certainly. Forget your puzzled and distressed mood, choosing our HP HPE6-A85 new exam guide materials will help you success without any doubt.
Training HPE6-A85 For Exam: https://www.surepassexams.com/HPE6-A85-exam-bootcamp.html
DOWNLOAD the newest SurePassExams HPE6-A85 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1LLzHuJyPrgGSfu3iVD8Au1a8m6f0zW0c