P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by Pass4guide: https://drive.google.com/open?id=1hP2oJlKXc7tniLNfA2SalO4cYzKK-CA8
In order to let you have a deep understanding of our EDGE-Expert learning guide, our company designed the free demos for our customers. We will provide you with free demos of our study materials before you buy our products. If you want to know our EDGE-Expert training materials, you can download them from the web page of our company. If you use the free demos of our EDGE-Expert study engine, you will find that our products are very useful for you to pass your EDGE-Expert exam and get the certification.
| Section | Weight | Objectives |
|---|---|---|
| Certification Process & Roles | 10% | - Role of EDGE Expert
|
| Materials & Embodied Carbon | 15% | - Low-impact material selection
|
| EDGE Fundamentals & Framework | 20% | - Certification levels and criteria
|
| Energy Efficiency | 25% | - Energy baseline calculation
|
| Water Efficiency | 20% | - Water conservation measures
|
| EDGE Software & Application | 10% | - Project documentation
|
>> Latest EDGE-Expert Exam Discount <<
Though the quality of our EDGE-Expert exam questions are the best in the career as we have engaged for over ten years and we are always working on the EDGE-Expert practice guide to make it better. But if you visit our website, you will find that our prices of the EDGE-Expert training prep are not high at all. Every candidate can afford it, even the students in the universities can buy it without any pressure. And we will give discounts on the EDGE-Expert learning materials from time to time.
NEW QUESTION # 36
Which of the following is a required measure?
Answer: B
Explanation:
In EDGE, certain measures are mandatory to ensure a baseline level of resource efficiency, while others are optional depending on the project's goals. The EDGE User Guide specifies mandatory measures for certification: "To achieve EDGE certification, projects must meet minimum requirements, including mandatory measures such as insulation of the roof to reduce heat gain or loss, ensuring a basic level of energy efficiency across all building typologies in climates where thermal performance is relevant" (EDGE User Guide, Section 4.1: Insulation Measures). Option B, insulation of roof, is identified as a required measure in EDGE, particularly in climates where heating or cooling loads are significant, which applies to most regions.
Option A (green roof) is an optional measure, not mandatory: "Green roofs are an optional measure in EDGE, contributing to energy and water savings but not required for certification" (EDGE User Guide, Section 4.5:
Additional Energy Measures). Option C (lighting controls) is also optional, as EDGE allows flexibility in lighting strategies: "Lighting controls, such as occupancy sensors, are optional measures that can enhance energy savings but are not mandatory" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures).
Option D (efficient lighting for internal areas) is encouraged but not required: "Efficient lighting for internal areas (EEM22) is an optional measure, requiring at least90% of lamps to be efficient, but projects can achieve certification without it if other energy measures meet the 20% savings threshold" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). The EDGE Certification Protocol reinforces this: "Mandatory measures like roof insulation ensure a minimum standard of energy efficiency, while measures like green roofs, lighting controls, and efficient lighting are optional and contribute to overall savings" (EDGE Certification Protocol, Section 2.2: Certification Requirements). Therefore, insulation of the roof (Option B) is the required measure among the options.
Reference:EDGE User Guide Version 2.1, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 4.5: Additional Energy Measures; EDGE Certification Protocol, Section 2.2: Certification Requirements.
NEW QUESTION # 37
Who are licensed to train candidates as EDGE Experts and EDGE Auditors?
Answer: D
Explanation:
Training for EDGE Experts and Auditors is a structured process managed by specific entities authorized by the IFC. The EDGE Expert and Auditor Protocols specify: "EDGE Faculty are licensed by IFC to deliver training for candidates aspiring to become EDGE Experts and EDGE Auditors. These trainers are selected and trained by IFC to ensure consistency and quality in the delivery of EDGE training programs" (EDGE Expert and Auditor Protocols, Section 3.2: Training Requirements). Option A, EDGE Faculty, directly matches this description. Option B (EDGE Auditors) is incorrect, as auditors perform audits, not training, per the protocols: "EDGE Auditors are responsible for verifying project compliance, not for training others" (EDGE Expert and Auditor Protocols, Section 2.2: Roles). Option C (EDGE Certification Providers) is also incorrect, as their role is to issue certifications, not conduct training: "Certification Providers like GBCI issue EDGE certificates but do not train candidates" (EDGE Certification Protocol, Section 1.3: Certification Process).
Option D (Accredited EDGE Experts) is wrong, as Experts advise on projects, not train others, as per the protocols: "EDGE Experts provide consultancy services to project teams" (EDGE Expert and Auditor Protocols, Section 2.1: Roles).
Reference:EDGE Expert and Auditor Protocols, Section 3.2: Training Requirements, Section 2.1: Roles, Section 2.2: Roles; EDGE Certification Protocol, Section 1.3: Certification Process.
NEW QUESTION # 38
Is it possible to be both the EDGE Expert and Auditor on a project?
Answer: D
Explanation:
The EDGE framework strictly enforces separation of roles to maintain integrity and avoid conflicts of interest during the certification process. The EDGE Expert and Auditor Protocols explicitly address this issue: "An individual cannot serve as both the EDGE Expert and EDGE Auditor on the same project. This separation ensures independence in the audit process, as the Expert's role as a consultant advising the project team could bias the Auditor's objective assessment of the project's compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option A, no, an EDGE Expert cannot be the EDGE Auditor on the same project, directly reflects this rule. Option B (no, even if the Certifier agrees to special terms) adds an unnecessary condition, as the protocols do not allow exceptions: "No exceptions are permitted for an individualto serve in both roles on the same project, regardless of agreements or special terms" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option C (yes, in all cases) is incorrect, as it contradicts the conflict-of-interest rules: "Allowing dual roles in all cases would undermine the impartiality required for certification" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (yes, if no other Auditors are available) is also incorrect, as availability does not override the conflict-of-interest prohibition: "Even if no other Auditors are available, the roles must remain separate; the Client must find a different Auditor or delay the audit" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). The EDGE User Guide reinforces this principle: "The separation of Expert and Auditor roles ensures a fair and unbiased certification process, protecting the credibility of EDGE certification" (EDGE User Guide, Section
6.4: Working with EDGE Experts). Thus, it is not possible to be both (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.4:
Working with EDGE Experts.
NEW QUESTION # 39
Which of the following measures will impact energy, water, and materials in an air-conditioned hospital with a water-cooled chiller?
Answer: D
Explanation:
In EDGE, measures are evaluated for their impact on energy, water, and embodied energy in materials, the three core pillars of the standard. For an air-conditioned hospital with a water-cooled chiller, the measure must affect all three areas to be the correct answer. The EDGE User Guide provides detailed descriptions of each measure's impact: "Variable speed drive (VSD) pumps in HVAC systems, such as those used in water- cooled chillers, impact energy by reducing electricity consumption through load modulation, water by optimizing the chiller's cooling water circulation (reducing water use in the cooling tower), and materials because their installation may involve additional components with embodied energy, such as the VSD unit itself" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option C, variable speed drive pumps, thus impacts all three areas: energy (reduced electricity use), water (less cooling tower water loss), and materials (embodied energy in the VSD equipment). Option A (insulation of the roof) affects energy (reduced cooling load) and materials (embodied energy in insulation), but not water: "Roof insulation reduces energy demand but does not directly impact water consumption" (EDGE User Guide, Section 4.1: Insulation Measures). Option B (water-efficient urinals) impacts water (reduced consumption) and potentially materials (embodied energy in fixtures), but not energy: "Water-efficient urinals save water but have no direct energy impact in EDGE calculations" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option D (water- efficient dishwashers) also affects water and materials, but not energy in this context: "Water-efficient dishwashers reduce water use, but their energy impact is minimal unless they include hot water savings, which is not specified for hospital dishwashers in EDGE" (EDGE Methodology Report Version 2.0, Section
4.2: Water Savings Calculations). The EDGE Methodology Report further confirms: "VSD pumps in water- cooled chillers are unique in affecting all three EDGE metrics-energy through efficiency, water through reduced cooling tower evaporation, and materials through the embodied energy of the equipment" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Thus, variable speed drive pumps (Option C) is the measure impacting energy, water, and materials.
Reference:EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.1: Insulation Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1:
Energy Efficiency Metrics, Section 4.2: Water Savings Calculations.
NEW QUESTION # 40
Which of the following user types has access to the Share Subproject function?
Answer: B
Explanation:
In the CBCI EDGE curriculum, the Share Subproject function is treated as a project administration permission, because it controls who can access a project or part of a project and what they are allowed to do inside the EDGE platform. Sharing affects project confidentiality, accountability for inputs, and control of documentation, so it is restricted to the user role that holds administrative authority over the project workspace.
The Owner role is the primary controlling role in an EDGE project. The Owner can manage access, invite or remove team members, and assign appropriate permissions for collaboration. This is consistent with how EDGE separates responsibilities: the client side controls project data entry, collaboration, and submissions, while verification roles remain independent.
Auditors and Certifiers are part of the independent third-party assessment pathway. Their access is typically granted for review and verification purposes, not for administering who the project is shared with. A Reviewer role, where used, is also generally a read-only or limited-access role and does not have authority to share or manage subprojects.
Therefor
NEW QUESTION # 41
......
If you don't prepare with real EDGE EDGE-Expert questions, you fail, lose time and money. Pass4guide product is specially designed to help you pass the exam on the first try. The study material is easy to use. You can choose from 3 different formats available according to your needs. The 3 formats are EDGE EDGE-Expert desktop practice test software, browser based practice exam, and PDF.
Latest EDGE-Expert Exam Dumps: https://www.pass4guide.com/EDGE-Expert-exam-guide-torrent.html
DOWNLOAD the newest Pass4guide EDGE-Expert PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1hP2oJlKXc7tniLNfA2SalO4cYzKK-CA8