P.S. Free 2026 Cisco 300-110 dumps are available on Google Drive shared by LatestCram: https://drive.google.com/open?id=1mdXkjidBxL2FMM0ky90n3YIs88WHJArp
Our excellent 300-110 practice materials beckon exam candidates around the world with their attractive characters. Our experts made significant contribution to their excellence. So we can say bluntly that our 300-110 actual exam is the best. Our effort in building the content of our 300-110study dumps lead to the development of 300-110 learning guide and strengthen their perfection. And the price of our exam prep is quite favourable!
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wireless Site Survey | 25% | - Layer 1 site survey analysis - Material attenuation and its design effects - Pre-deployment site survey - Collect design requirements and evaluate constraints - Planning tools and network metrics evaluation - Predictive site survey - Post-deployment site survey |
| Topic 2: WLAN High Availability | 20% | - Design controller high availability - Design AP high availability |
| Topic 3: Mobility | 25% | - Site Tags - Validate mobility tunneling - Design mobility groups - Optimize client roaming |
| Topic 4: Wired and Wireless Infrastructure | 30% | - Design for data, voice, video, location - Design radio management - Design high-density wireless networks - Design wireless bridging (mesh) - Logical infrastructure requirements - Physical infrastructure requirements |
Candidates all around the globe use their full potential only to get Cisco 300-110 certification. Once the candidate is a Cisco certified, he gets multiple good career opportunities in the Cisco sector. To pass the 300-110 Certification Exam a candidate needs to be updated and reliable Designing Cisco Wireless Networks (300-110) prep material.
NEW QUESTION # 123
An enterprise network administrator is asked to set up an experimental WLAN for a collaboration project with a local service provider. The WLAN must be anchored to a WLC in the service provider data center using legacy mobility mode. After the configurations are completed on the WLCs and the firewalls in the path, the data path mobility tunnel is failing to come up. What should be performed by the administrator to debug the issue?
Answer: D
Explanation:
When a data path mobility tunnel fails to come up between WLCs, one of the key troubleshooting steps is to verify whether the necessary ports are open through firewalls in the path. Cisco AireOS mobility tunnels use UDP port 16666 for mobility control traffic and IP Protocol 97 (EtherIP) for mobility data traffic in legacy mode. Establishing a Telnet connection from a local PC to the firewall on port 16666 tests whether the control path port is reachable and not being blocked by the firewall. If the Telnet connection fails, it confirms that the firewall is blocking port 16666, which would prevent the mobility control tunnel from establishing - a prerequisite for the data tunnel. While a Telnet test to port 16666 specifically tests the control path, in practice this is the first verification performed when the data path cannot establish (since the data path depends on the control path being operational). IP Protocol 97 cannot be tested via Telnet (which is TCP). The mping command (Option D, not ' mapping ' ) tests mobility tunnel connectivity from the WLC itself after the tunnel is established. Reference: WLSD Study Guide - Mobility Tunnel Troubleshooting, Firewall Port Requirements, UDP 16666 and IP Protocol 97.
NEW QUESTION # 124
A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco
9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which command must be added to meet the requirements?
Answer: B
Explanation:
In a mixed deployment where a Cisco Catalyst 9800 IOS XE WLC operating in SSO is required to establish a mobility peer relationship with a legacy AireOS WLC, the critical configuration requirement is that the 9800 SSO pair presents a single, consistent mobility MAC address to all peer WLCs. When the 9800 is in SSO mode, the active and standby controllers function as a single logical entity, but AireOS WLCs identify mobility peers by MAC address. If the MAC address changes during an SSO switchover, the AireOS peer will detect the change and tear down the mobility tunnel, disrupting inter-controller client roaming. The command ' wireless mobility mac-address < MAC > ' configures a static, persistent mobility MAC address on the 9800 SSO pair that remains constant regardless of which physical unit is active. This ensures the AireOS WLC always identifies the 9800 pair by the same MAC address, maintaining the mobility tunnel and enabling seamless client roaming. Option A configures the HA interface for SSO synchronization but not for AireOS mobility interoperability. Option B sets a default gateway. Option D enables management gateway failover, unrelated to mobility peer identification. Reference: WLSD Study Guide - IOS XE WLC SSO Configuration, AireOS to 9800 Migration, Mobility Peer MAC Address Management.
NEW QUESTION # 125
Which profile is included within a site tag when configured in a Cisco 9800 WLC architecture?
Answer: B
Explanation:
The Cisco Catalyst 9800 IOS XE WLC uses a tag-based configuration architecture. Three primary tag types are used: site tags, policy tags, and RF tags. The site tag associates an AP with its operational context and contains two specific profile references: the AP join profile (defining AP-level parameters such as NTP, syslog, SSH, LED behavior, and CAPWAP timers) and the flex profile (defining FlexConnect-specific parameters including locally switched VLANs, split tunneling, local authentication settings, and VLAN-ACL mappings). The flex profile within the site tag enables the AP to operate in FlexConnect mode with locally configured switching behavior when WLC connectivity is lost.
NEW QUESTION # 126
An engineer is designing a wireless solution for a corporate campus which includes two primary buildings:
Research and Operations. The design must ensure seamless mobility for employees moving between buildings, support uninterrupted connectivity for real-time applications, and facilitate efficient Layer 2 and Layer 3 roaming. Each building ' s 9800-80 WLC manages its local APs, and the solution must support 802.11 r/k/v while maintaining an effective mobility control plane. Which design approach leverages Cisco mobility group architecture to meet the requirements?
Answer: C
Explanation:
Cisco ' s mobility group architecture enables seamless client roaming between WLCs by establishing a trusted peer relationship and shared mobility domain. When two Cisco Catalyst 9800-80 WLCs are placed in the same mobility group, they establish CAPWAP mobility tunnels enabling both Layer 2 and Layer 3 roaming with session continuity including IP address preservation. Within the same mobility group, WLCs exchange client state information, allowing 802.11r Fast BSS Transition, 802.11k neighbor reports, and 802.11v BSS Transition Management to function across controller boundaries. No specific primary or secondary roles are assigned within a mobility group - all members are peers with equal standing for roaming purposes, which is precisely what Option D describes. Option A incorrectly implies a hierarchical structure that does not exist in mobility group peer relationships. Option B separating the WLCs into different groups would break inter- building roaming since clients would experience a full re-authentication cycle. Option C imposing an anchor relationship is appropriate only for guest WLANs. Reference: WLSD Study Guide - Mobility Group Architecture, Inter-Controller Roaming, 802.11r/k/v Fast Roaming Design.
NEW QUESTION # 127
An engineer is performing a passive survey report. The coverage heat map shows the entire site with all signal levels. To see only the desired coverage, which action must the engineer take?
Answer: A
Explanation:
To focus the coverage heat map on the desired coverage threshold, the engineer should use the RSSI slider to set the heat map to the desired cutoff filter. This action adjusts the display to show only the signal levels that meet or exceed the specified RSSI value, effectively filtering out weaker signals and highlighting areas with sufficient coverage. In Ekahau and similar survey tools, the RSSI slider provides a dynamic way to set minimum signal thresholds, allowing the engineer to quickly validate whether coverage meets design targets such as -67 dBm for voice or -70 dBm for data. Changing the color scheme (Option A) only modifies the visual representation without filtering data. The RSSI calibration tool (Option B) adjusts how the tool perceives signal levels, not the display filter. Filtering by AP (Option D) would remove APs from the view, potentially hiding coverage gaps. Reference: WLSD Study Guide - Post-Deployment Survey, Ekahau Heat Map Tools, RSSI Coverage Filtering.
NEW QUESTION # 128
......
There may be a lot of people feel that the preparation process for 300-110 exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our 300-110 Exam Materials will radically change this. High question hit rate makes you no longer aimless when preparing for the exam, so you just should review according to the content of our 300-110 study guide prepared for you.
300-110 Exam Questions Answers: https://www.latestcram.com/300-110-exam-cram-questions.html
P.S. Free & New 300-110 dumps are available on Google Drive shared by LatestCram: https://drive.google.com/open?id=1mdXkjidBxL2FMM0ky90n3YIs88WHJArp