P.S. Free & New SD-WAN-Engineer dumps are available on Google Drive shared by iPassleader: https://drive.google.com/open?id=1IGyTrZNR1mEZHZ4HPfH7BPfaRhd7rpYN
By reviewing these results, you will be able to know and remove your mistakes. These SD-WAN-Engineer practice exams are created as per the pattern of the SD-WAN-Engineer real examination. Therefore, Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) mock exam takers will experience the real exam environment. It will calm down their nerves so they can appear in the Palo Alto Networks SD-WAN-Engineer final test without anxiety or fear.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> SD-WAN-Engineer Lead2pass <<
iPassleader offers authentic SD-WAN-Engineer questions with accurate answers in their Palo Alto Networks SD-WAN Engineer Exam practice questions file. These exam questions are designed to enhance your understanding of the concepts and improve your knowledge of the SD-WAN-Engineer Quiz dumps. By using these questions, you can identify your weak areas and focus on them, there by strengthening your preparation for the Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) Exam.
NEW QUESTION # 25
In a Prisma SD-WAN deployment, what is the defining characteristic of a "Standard VPN" compared to a
"Secure Fabric Link"?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
In the Prisma SD-WAN architecture, the terminology distinguishes between "Native" automation and
"Legacy" interoperability.
* Secure Fabric Links: These are the proprietary, automated overlay tunnels created between two Prisma SD-WAN ION devices (e.g., Branch ION to Data Center ION). The controller automatically manages the IP addressing, key rotation, and routing for these links. You do not manually configure
"Phase 1" or "Phase 2" parameters for Secure Fabric links.
* Standard VPNs: These are traditional, standards-based IPSec tunnels configured to connect an ION device to a Non-ION endpoint (Third-Party Peer). This is used for "Data Center to Data Center" connections where one side is a legacy firewall (e.g., Cisco ASA, Palo Alto Networks NGFW) or for connecting to cloud security services (SSE) that do not have a specific CloudBlade integration. For a Standard VPN, the administrator must manually define the IKE/IPSec profiles, pre-shared keys, and peer IP addresses to match the third-party device's configuration.
NEW QUESTION # 26
In the Prisma SD-WAN portal, the Application Health dashboard assigns a color-coded "Health Score" (Green, Yellow, Red) to applications.
Which three metrics are combined to calculate this composite AppX (Application Experience) score? (Choose three.)
Answer: B,C,D
Explanation:
Comprehensive and Detailed Explanation
The AppX (Application Experience) score is a proprietary metric used by Prisma SD-WAN to provide a holistic view of user experience, rather than just network statistics. It is calculated based on three key components:
* Transaction Failure Rate (A): The percentage of application transactions that failed (e.g., TCP resets, HTTP 500 errors). This indicates availability.
* Network Transfer Time (B): The time taken for packets to traverse the network (WAN/LAN latency).
This indicates network health.
* Server Response Time (C): The time taken by the application server to respond to a request. This indicates backend performance.
Why not D or E?
* Bandwidth Utilization (D) is a capacity metric, not a direct measure of quality. A link can be 90% full but still deliver packets quickly (good AppX), or 10% full but dropping packets (bad AppX).
* Jitter (E) is a network-layer metric primarily relevant for UDP Real-Time media. While important, the high-level "AppX" score for general TCP apps focuses on the "Time-to-Glass" metrics (NTT/SRT) and success rates.
NEW QUESTION # 27
What is the default behavior of the Zone-Based Firewall (ZBFW) for traffic originating from the ION device itself (e.g., DNS queries, NTP sync, or Controller connectivity) destined for the "Internet" zone?
Answer: C
Explanation:
Comprehensive and Detailed Explanation
The Self-Zone is a predefined security zone in the Prisma SD-WAN ZBFW that represents the ION device's own control plane and management traffic.
Default Rule: The security policy contains an implicit, uneditable default rule that Allows traffic originating from the Self-Zone to any destination zone (Internet, Private WAN, etc.).
Rationale: This ensures that the device can always perform essential critical functions-such as connecting to the Cloud Controller, resolving DNS, syncing time via NTP, and establishing VPN tunnels-without the administrator needing to manually create "Allow" rules for the device itself. If this traffic were blocked by a "Deny All" default, the device would become unmanageable (bricked) immediately after applying the policy.
NEW QUESTION # 28
An administrator is configuring a High Availability (HA) pair of ION 3000 devices at a Data Center.
Which statement accurately describes the requirement for the HA Control Interface connection between the two devices?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
In a Prisma SD-WAN High Availability (HA) deployment, the HA Control Interface is the critical lifeline used to synchronize state, heartbeats, and flow information between the Active and Standby ION devices.
The strict requirement for this connection is that it must be Layer 2 adjacent.
Best Practice: A direct physical cable connection between the designated HA ports of the two devices (e.g., Port 2 on Device A to Port 2 on Device B).
Alternative: Connectivity through a switch on a dedicated, isolated VLAN is supported, provided the devices are in the same broadcast domain and subnet.
Routing (Layer 3) is not supported for the HA Control link because the keepalive mechanism relies on low-latency, multicast/broadcast-level adjacency to detect failures instantly (sub-second failover). If the HA link were routed (Option A), network latency or router convergence issues could cause "Split-Brain" scenarios where both devices assume the Active role, leading to IP conflicts and traffic loops. Option C is incorrect because the Controller is too slow to manage real-time failover; the decision must be local.
NEW QUESTION # 29
What are two potential causes when a secondary public circuit has been added to the branch site, but the Prisma SD-WAN tunnel is not forming to the data center? (Choose two.)
Answer: A,C
Explanation:
In a Prisma SD-WAN deployment, the formation of VPN tunnels between a branch ION device and a Data Center (DC) ION is governed by specific configuration parameters that define how an interface interacts with the WAN fabric. When a secondary public circuit is introduced, the system requires precise classification to initiate the negotiation of security associations.
The first critical factor is the Interface Role. For an ION device to attempt to build a global fabric tunnel over a public circuit, the interface must be explicitly assigned the "Internet" role. If the role is incorrectly set (e.g., as "LAN" or left unconfigured), the device will not treat that physical port as a viable path for the SD- WAN overlay, preventing the tunnel from initiating.
Secondly, the Circuit Label plays a vital role in the path selection and tunnel orchestration logic. Prisma SD- WAN uses labels to match local branch circuits with corresponding circuits at the data center or other branches. If a circuit label is missing or mismatched on the interface configuration, the Controller cannot properly orchestrate the "bind" between the branch and the hub. Without a valid label, the ION device doesn't know which path group the circuit belongs to, and consequently, the automated tunnel signaling process fails to complete.
While DNS is important for management connectivity to the Controller, it is generally not the primary blocker for site-to-site tunnel formation if the Controller reachability is already established via the primary circuit.
Similarly, "Interface Scope" is more relevant to routing advertisement rather than the foundational establishment of the SD-WAN tunnel itself. Therefore, ensuring the Internet role and Circuit Label are correctly applied is the standard troubleshooting step for non-forming tunnels on new circuits.
NEW QUESTION # 30
......
There are a lot of excellent experts and professors in our company. The high quality of the SD-WAN-Engineer study materials from our company resulted from their constant practice, hard work and their strong team spirit. After a long period of research and development, our SD-WAN-Engineer study materials have been the leader study materials in the field. We have taken our customers’ suggestions of the SD-WAN-Engineer Study Materials seriously, and according to these useful suggestions, we have tried our best to perfect the SD-WAN-Engineer study materials from our company just in order to meet the need of these customers well.
New SD-WAN-Engineer Test Syllabus: https://www.ipassleader.com/Palo-Alto-Networks/SD-WAN-Engineer-practice-exam-dumps.html
BONUS!!! Download part of iPassleader SD-WAN-Engineer dumps for free: https://drive.google.com/open?id=1IGyTrZNR1mEZHZ4HPfH7BPfaRhd7rpYN