BONUS！！！ Tech4Exam EDGE-Expertダンプの一部を無料でダウンロード：https://drive.google.com/open?id=1j5Qn64bogHfmZEgj-XXE7IwkA39DLnck
IT認定試験の中でどんな試験を受けても、Tech4ExamのEDGE-Expert試験参考資料はあなたに大きなヘルプを与えることができます。それは Tech4ExamのEDGE-Expert問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。真剣にTech4ExamのEDGE EDGE-Expert問題集を勉強する限り、受験したい試験に楽に合格することができるということです。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Software & Methodology | 25% | - Baseline & Proposed Building Models
|
| Topic 2: Energy Efficiency | 25% | - Energy Consumption
|
| Topic 3: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 4: EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Topic 5: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
私たちTech4Examは現在、競争の激しい世界に住んでいます。 EDGE-Expert認定を取得するなど、ソフトパワーを改善する以外に選択肢はありません。 EDGE-Expertトレントが試験に合格し、履歴書を強調することで職場で成功を収めることができます。 EDGE-Expert試験に合格して認定資格を取得したい場合は、EDGE-Expertガイドの質問があなたの理想的な選択であることを確認できます。当社は、EDGE-Expert試験問題に関する専門チーム、高品質のサービス、リーズナブルな価格を提供します。
質問 # 98
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?
正解：D
解説：
The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: "At the post-construction stage, the Client must provide manufacturer's data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements" (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: "Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: "Bills of quantities may support purchase verification, but manufacturer's data sheets are required for technical specifications like U-value and SHGC" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: "Window schedules may indicate glass types, but they do not replace the need for manufacturer's data sheets with U-value and SHGC at post-construction" (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: "For glazing measures, post-construction evidence must confirm the installed product's performance through manufacturer's data sheets, ensuring alignment with the design-stage claims" (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer's data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.
質問 # 99
A building owner tells an EDGE Auditor that water-efficient faucets are in the building's restrooms.
However, the specifications on the faucets are not provided. The Auditor should:
正解：C
解説：
EDGE Auditors must adhere to strict protocols ensuring that all claimed measures are supported by verifiable evidence, especially during audits. The EDGE Expert and Auditor Protocols state: "If a claimed measure, such as water-efficient faucets, lacks supporting documentation like specifications or manufacturer's data sheets, the Auditor must exclude the measure from the project assessment. The Auditor is not permitted to test equipment, substitute evidence, or mandate replacements, as their role is to verify, not rectify, the Client's submission" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option A, exclude the faucets from the project, aligns with this protocol, as the lack of specifications prevents verification. Option B (test the faucets' flow rates) is incorrect, as Auditors cannot conduct tests: "Auditors are not responsible for testing equipment; they must rely on provided documentation" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option C (require the owner to replace the faucets) oversteps the Auditor's role:
"Auditors cannot mandate changes to the project; they assess what is submitted" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option D (find a product with the same parameters) is also prohibited: "Auditors cannot substitute or assume evidence on behalf of the Client" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Thus, the Auditor should exclude the faucets (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements.
質問 # 100
In EDGE software, occupancy sensors are used for controlling:
正解：B
解説：
Occupancy sensors in the EDGE software are part of energy efficiency measures aimed at reducing unnecessary energy use by automating system operation based on occupant presence. The EDGE User Guide explicitly defines their application: "Occupancy sensors in EDGE are used for controlling lighting in internal areas, automatically turning lights off when spaces are unoccupied to reduce energy consumption. This measure, often listed as EEM23 - Occupancy Sensors for Lighting, can achieve significant savings in buildings with intermittent occupancy, such as offices or schools" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, lighting, directly matches this description, as occupancy sensors are primarily associated with lighting control in EDGE. Option B (water taps) is incorrect, as occupancy sensors are not used for water systems in EDGE: "Water taps may be controlled by sensors in some projects, but this is not a recognized measure in EDGE, which focuses on measures like low-flow fixtures for water savings" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option C (air conditioners) is also incorrect, as occupancy sensors for HVAC are not a standard measure in EDGE: "While occupancy sensors can theoretically control air conditioners, EDGE does not include this as a measure; HVACefficiency is addressed through measures like variable speed drives or efficient chillers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option D (external lighting) is not applicable, as EDGE specifies occupancy sensors for internal areas: "Occupancy sensors in EDGE are applied to internal lighting, not external lighting, which may use timers or photocells instead" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). The EDGE Methodology Report further confirms: "The energy savings from occupancy sensors in EDGE are calculated based on reduced lighting hours in internal spaces, reflecting typical usage patterns in commercial buildings" (EDGE Methodology Report Version 2.0, Section 5.4:
Lighting Calculations). Thus, occupancy sensors are used for controlling lighting (Option A).
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.4: Lighting Calculations.
質問 # 101
Default improved case values in each measure in the EDGE software should be adjusted by the
正解：D
解説：
According to the CBCI EDGE curriculum and EDGE certification workflow, the responsibility for entering and adjusting default improved case values in the EDGE software lies primarily with the Client or the Client's appointed EDGE Expert during the design phase. The improved case represents the proposed energy, water, and materials efficiency strategies that go beyond the baseline case. Therefore, it must accurately reflect the design intent, specifications, and selected green measures for the project.
The Auditor's role is not to create or modify the improved case on behalf of the Client, but to independently review, verify, and validate the inputs against supporting documentation. This ensures impartiality and maintains the integrity of the certification process. Allowing the Auditor to adjust values directly would compromise the independent third-party verification principle embedded in the EDGE certification framework.
The EDGE Operations and Maintenance Team is relevant mainly for operational performance after project completion, not for inputting design-stage software data. Similarly, the Certification Provider oversees the process but does not alter project-specific software inputs. Therefore, the correct process is that the Client adjusts the improved case values, and the Auditor reviews them for compliance and accuracy.
質問 # 102
Which are the certification levels within the EDGE certification system?
正解：C
解説：
The CBCI EDGE curriculum explains that the EDGE system uses a tiered structure that starts with resource- efficiency certification and can progress to a net-carbon outcome. The foundational level is EDGE Certified, which is achieved when a project demonstrates at least 20 percent savings in energy, water, and embodied energy in materials compared with the baseline. Above this is EDGE Advanced, which retains the same minimum 20 percent requirements for water and materials while requiring a higher performance threshold for energy, meaning at least 40 percent energy savings.
Beyond these two efficiency tiers, the system includes EDGE Zero Carbon, which builds on EDGE Certified or EDGE Advanced by addressing the project's carbon footprint through a combination of high energy efficiency, on-site or off-site renewable energy to reduce operational emissions, and carbon offsets for remaining operational emissions to reach net zero operational carbon.
The options that mention Silver, Gold, and Platinum reflect other rating systems, not EDGE. EDGE also does not use "EDGE Zero Energy" as the certification level name in the core tier list presented in the curriculum.
Therefore, the correct set of certification levels is EDGE Certified, EDGE Advanced, and EDGE Zero Carbon.
質問 # 103
......
Tech4ExamのEDGEのEDGE-Expert試験トレーニング資料を使ったら、君のEDGEのEDGE-Expert認定試験に合格するという夢が叶えます。なぜなら、それはEDGEのEDGE-Expert認定試験に関する必要なものを含まれるからです。Tech4Examを選んだら、あなたは簡単に認定試験に合格することができますし、あなたはITエリートたちの一人になることもできます。まだ何を待っていますか。早速買いに行きましょう。
EDGE-Expert試験参考書: https://www.tech4exam.com/EDGE-Expert-pass-shiken.html
さらに、Tech4Exam EDGE-Expertダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1j5Qn64bogHfmZEgj-XXE7IwkA39DLnck