BONUS!!! Download part of Actualtests4sure H12-893_V1.0 dumps for free: https://drive.google.com/open?id=1S2ryg8jcupxMoYNeyXhcZLqg0eZDjc6v
Our H12-893_V1.0 study materials are widely read and accepted by people. Through careful adaption and reorganization, all knowledge will be integrated in our H12-893_V1.0 real exam. The explanations of our H12-893_V1.0 exam materials also go through strict inspections. So what you have learned are absolutely correct. All in all, we have invested many efforts on compiling of the H12-893_V1.0 Practice Guide. At last, we will arrange proofreaders to check the study materials.
| Section | Weight | Objectives |
|---|---|---|
| VXLAN Technology Principles and Applications | 25% | - EVPN control plane technology - VXLAN deployment and configuration - VXLAN fundamentals and evolution |
| Virtualization Technology Principles and Applications | 20% | - Server and network virtualization basics - Huawei FusionCompute platform
|
| Data Center Network Planning and Deployment | 30% | - Security and management design - CloudFabric solution architecture
|
| Data Center Network Operation and Maintenance | 25% | - Intelligent O&M solutions
- Monitoring and troubleshooting |
>> H12-893_V1.0 Reliable Exam Testking <<
In fact, purchasing our H12-893_V1.0 Actual Test means you have been half success. Good decision is of great significance if you want to pass the H12-893_V1.0 exam for the first time. That is to say, if you decide to choose our study materials, you will pass your exam at your first attempt. Not only that, we also provide all candidates with free demo to check our product, it is believed that our free demo will completely conquer you after trying.
NEW QUESTION # 84
VXLAN is a network virtualization technology that uses MAC-in-UDP encapsulation. What is the destination port number used during UDP encapsulation?
Answer: C
Explanation:
VXLAN (Virtual Extensible LAN) is a network overlay technology that encapsulates Layer 2 Ethernet frames within UDP packets to extend Layer 2 networks over Layer 3 infrastructure, widely used in Huawei's CloudFabric data center solutions. The encapsulation process, often referred to as "MAC-in-UDP," involves wrapping the original Ethernet frame (including MAC addresses) inside a UDP packet.
UDP Encapsulation: The VXLAN header follows the UDP header, and the destination UDP port number identifies VXLAN traffic. The Internet Assigned Numbers Authority (IANA) has officially assigned UDP port 4789 as the default destination port for VXLAN.
Options Analysis:
A . 4787: This is not a standard VXLAN port and is not recognized by IANA or Huawei documentation.
B . 4789: This is the correct and widely adopted destination port for VXLAN, as specified in RFC 7348 and implemented in Huawei's VXLAN configurations.
C . 4790: This port is not associated with VXLAN and is unused in this context.
D . 4788: This is not a standard VXLAN port; it may be confused with other protocols but is not correct for VXLAN.
Thus, the destination port number used during UDP encapsulation in VXLAN is B (4789), aligning with Huawei's VXLAN implementation standards.
NEW QUESTION # 85
M-LAG configuration consistency check classifies device configurations into key configurations (Type 1) and common configurations (Type 2). This check can be performed in strict or loose mode based on the processing mode when key configurations are inconsistent. Which of the following statements is false about M-LAG configuration consistency check?
Answer: D
Explanation:
To identify the false statement, we evaluate each option based on standard M-LAG documentation, such as Huawei's and Arista's guidelines, which are commonly referenced in HCIP-Data Center Network training.
Option A: In loose mode, if Type 1 configurations of the two M-LAG member devices are inconsistent, the member interface on the M-LAG backup device is in Error-Down state and an alarm is generated, indicating that Type 1 configurations on the two devices are inconsistent.
Evaluation: This statement is true. In loose mode, inconsistencies in Type 1 (key) configurations are still critical, as they can affect M-LAG operation. According to Huawei M-LAG Configuration Guide, when Type 1 configurations are inconsistent in loose mode, the system may place the member interface on the backup device into an Error-Down state and generate an alarm to alert administrators. This ensures that critical issues are flagged, even in loose mode, to prevent loops or packet loss.
Conclusion: True.
Option B: If Type 1 configurations of the two M-LAG member devices are inconsistent, certain problems may occur, such as loops and long-period packet loss when the status is normal.
Evaluation: This statement is true. Type 1 configurations are essential for M-LAG operation, and inconsistencies can lead to severe network issues. For example, mismatched LACP settings or VLAN mappings can create loops or cause packet loss, as noted in Arista M-LAG Documentation. These problems can persist even when the system appears normal, making consistency checks critical for troubleshooting and O&M.
Conclusion: True.
Option C: If Type 2 configurations of the two M-LAG member devices are inconsistent, the M-LAG running status may be abnormal. Compared with Type 1 configuration problems, Type 2 configuration problems are more likely to be detected and have less impact on the network.
Evaluation: This statement is true. Type 2 (common) configurations, such as QoS or STP settings, are less critical but can still affect network performance. According to Huawei M-LAG Best Practices, Type 2 inconsistencies are often detected during consistency checks but have a lower impact on M-LAG operation compared to Type 1 issues. They are also more likely to be flagged during monitoring, as they are less severe and easier to resolve.
Conclusion: True.
Option D: If Type 2 configurations of the two M-LAG member devices are inconsistent, an alarm that indicates key and common configuration inconsistencies is generated.
Evaluation: This statement is false. While Type 2 (common) configuration inconsistencies are detected during consistency checks, they do not typically trigger alarms, especially alarms that specifically indicate both key and common configuration inconsistencies. According to Huawei M-LAG Configuration Guide and Arista M-LAG Documentation, Type 2 inconsistencies may be logged or reported in system logs but are not severe enough to generate critical alarms unless they significantly impact network operation. Alarms are more commonly associated with Type 1 (key) configuration inconsistencies, as they pose a higher risk to M-LAG functionality.
Conclusion: False.
NEW QUESTION # 86
Which of the following statements is false about M-LAG deployment?
Answer: A
Explanation:
M-LAG (Multi-Chassis Link Aggregation) on Huawei CE series switches enhances high availability and load balancing by making two switches appear as one. Let's evaluate each statement:
A). Multi-level M-LAG is mainly used to construct a large Layer 2 network in a DCN or directly connect DCNs at Layer 2: This is true. Multi-level M-LAG extends the topology across multiple layers or data centers, facilitating large Layer 2 domains, a common use case in Huawei DCNs.
TRUE.
B). In multi-level M-LAG networking, you can manually configure the root bridge to prevent STP loops: This is true. Manual configuration of the root bridge (e.g., using STP priority) is supported to optimize path selection and prevent loops, especially in complex M-LAG setups. TRUE.
C). Multi-level M-LAG must be configured based on V-STP: This is false. While V-STP can be used to prevent loops, M-LAG does not require V-STP specifically. Standard STP, RSTP, or MSTP can also be configured, depending on the network design. The requirement is loop prevention, not a mandatory V-STP dependency. FALSE.
D). M-LAG networking can be classified into single-level M-LAG networking and multi-level M-LAG networking: This is true. Single-level M-LAG connects two switches directly to devices, while multi- level M-LAG extends across additional layers or devices, a recognized classification in Huawei documentation. TRUE.
Thus, C is the false statement because multi-level M-LAG does not mandate V-STP configuration.
NEW QUESTION # 87
After an M-LAG works properly, the two member devices synchronize information with each other in real time. Which of the following pieces of information are synchronized between devices?
(Select All that Apply)
Answer: A,D
Explanation:
In Huawei's M-LAG (Multi-Chassis Link Aggregation) on CE series switches, the two member devices synchronize critical information over the peer-link to ensure seamless operation and failover. Let's evaluate each option:
A). ACL information: Access Control List (ACL) configurations are typically not synchronized in M- LAG, as they are device-specific security policies. Synchronization of ACLs is not a standard feature in Huawei's M-LAG implementation. NOT SYNCHRONIZED.
B). STP status: Spanning Tree Protocol (STP) status (e.g., port roles, states) is synchronized to maintain a consistent loop-free topology across M-LAG peers, especially when V-STP or other STP variants are used. SYNCHRONIZED.
C). Device name: Device names are administrative identifiers and are not synchronized, as they do not impact traffic forwarding or M-LAG functionality. NOT SYNCHRONIZED.
D). LACP information: Link Aggregation Control Protocol (LACP) status (e.g., link states, aggregation details) is synchronized to ensure both M-LAG devices present a unified LAG to downstream devices, supporting load balancing and failover. SYNCHRONIZED.
Thus, B (STP status) and D (LACP information) are synchronized between M-LAG devices.
NEW QUESTION # 88
An enterprise builds a DC and deploys iMaster NCE-Fabric to automatically deliver network configurations. After the engineer manually deploys the underlay network and delivers overlay network configurations through iMaster NCE-Fabric, it is found that tenant hosts cannot access external networks. Which of the following is not a possible cause of this fault?
Answer: C
Explanation:
In Huawei's CloudFabric Solution, iMaster NCE-Fabric automates overlay network (e.g., VXLAN) configuration, while the underlay network is manually deployed. Tenant hosts failing to access external networks indicate a connectivity issue, likely at the overlay-underlay boundary or security layer. Let's evaluate each option as a possible cause:
A . No return route is configured on the PE: This is a possible cause. The Provider Edge (PE) device (e.g., border leaf or router) must have a return route to the tenant's VXLAN network for external access. Without it, traffic from external networks cannot reach the DC. POSSIBLE CAUSE.
B . The engineer did not check whether the service loopback interface needs to be configured on the VXLAN network based on the switch model: This is a possible cause. Some Huawei switch models (e.g., CE series) require a service loopback interface as the VTEP source IP. If omitted or misconfigured based on the model, external connectivity fails. POSSIBLE CAUSE.
C . No firewall security policy is configured when host traffic passes through the firewall: This is a possible cause. If a firewall is in the path (e.g., between tenant VPC and external network), a missing security policy (e.g., allowing outbound traffic) blocks access. POSSIBLE CAUSE.
D . The MAC address of the NVE interface on the VXLAN network is not manually specified: This is not a possible cause. The Network Virtualization Edge (NVE) interface in VXLAN does not require a manually specified MAC address; it uses the switch's system MAC or auto-generates one. iMaster NCE-Fabric typically handles this automatically, and manual specification is neither required nor a common fault point for external access issues. NOT A POSSIBLE CAUSE.
Thus, D is not a possible cause of the fault.
NEW QUESTION # 89
......
For candidates who are going to attend the exam, the pass rate is quite important. H12-893_V1.0 training materials of us are pass guaranteed, and if you can’t pass the exam one time, we are money back guaranteed. Besides H12-893_V1.0 training materials are verified by skilled experts, therefore the quality and accuracy can be guaranteed, and you can use the H12-893_V1.0 Exam Dumps at ease. We also have online and offline chat service stuff, if any other questions, please contact us, we will give a reply to you as quickly as possible.
New H12-893_V1.0 Exam Testking: https://www.actualtests4sure.com/H12-893_V1.0-test-questions.html
P.S. Free & New H12-893_V1.0 dumps are available on Google Drive shared by Actualtests4sure: https://drive.google.com/open?id=1S2ryg8jcupxMoYNeyXhcZLqg0eZDjc6v