During your use of our M2 learning materials, we also provide you with 24 hours of free online services. Whenever you encounter any M2 problems in the learning process, you can email us and we will help you to solve them immediately. And you will find that our service can give you not only the most professional advice on M2 Exam Questions, but also the most accurate data on the updates.
| Section | Objectives |
|---|---|
| General Administration and Mechanical Inspection Practice | - Code enforcement procedures and inspector responsibilities
|
| Ventilation and Indoor Air Quality | - Ventilation requirements
|
| Mechanical Appliances and Equipment | - Boilers, furnaces, and water heaters
|
| Fuel Gas Systems | - Gas piping and appliance installation
|
| Mechanical Code (IMC) Fundamentals | - International Mechanical Code application
|
| HVAC Systems and Equipment | - Heating and cooling systems
|
>> M2 Sample Questions Answers <<
Your selection on the riht tool to help your pass the M2 exam and get the according certification matters a lot for the right M2 exam braindumps will spread you a lot of time and efforts. Our M2 Study Guide is the most reliable and popular exam product in the marcket for we only sell the latest M2 practice engine to our clients and you can have a free trial before your purchase.
NEW QUESTION # 20
A low-pressure steam heating boiler is a boiler furnishing a maximum steam pressure of _____ psi.
Answer: D
Explanation:
A low-pressure steam heating boiler is defined as a boiler furnishing steam at pressures not exceeding 15 psi . That matches Option B .
NEW QUESTION # 21
When a permit is issued, the code requires that one set of approved plans and specifications be returned to the applicant.
This set of plans and specifications shall be:
Answer: C
Explanation:
Under the ICC administrative provisions used with the mechanical code, one approved set is retained by the code official, and one approved set is returned to the applicant. The returned set must be kept on the site of the building or job while the authorized work is in progress. That directly matches Option A . It does not require return to the architect, filing with the county clerk, or retention for one year after completion.
NEW QUESTION # 22
A cooling system with a condensate disposal system:
Answer: D
Explanation:
The ICC mechanical code requires condensate disposal components to be of approved corrosion-resistant material , and the drain line shall not decrease in size from the drain pan connection to the place of disposal.
The code minimum size is 3/4 inch , so the 1/2-inch statement is incorrect, and the code is not limited to PVC only. Also, the slope requirement for horizontal drain piping is not less than 1/8 inch per foot , not 1/4 inch per foot. That makes Option A the only fully correct statement.
NEW QUESTION # 23
Why are two or more sets of construction documents, engineering calculations, diagrams, and other data required to be submitted with each application for a permit?
Answer: D
Explanation:
The ICC administrative provisions require construction documents to be submitted in two or more sets with the permit application. After approval, one set is retained by the code official and one set is returned to the applicant to be kept on the job site during construction. That is exactly the condition described in Option D .
The code does not state that all sets are retained by the code official or that the purpose is to provide subcontractor copies or backup copies.
NEW QUESTION # 24
When a furnace is installed in a 66-inch-high attic, the maximum distance from the passageway access to the furnace shall be _____ ft., measured along the centerline of the passageway.
Answer: B
Explanation:
ICC mechanical access provisions for appliances in attics require the passageway to be not more than 20 feet in length , measured along the centerline of the passageway from the opening to the appliance, where the attic passageway is the standard reduced-height access condition. Since the attic height given is 66 inches, the standard maximum length applies, so Option C is correct. The 50-foot allowance applies only under a different exception where the passageway is unobstructed and at least 6 feet high for its entire length.
NEW QUESTION # 25
......
If you feel unconfident in self-preparation for your M2 test and want to get professional aid of questions and answers, TestPassed M2 test questions materials will guide you and help you to pass the certification exams in one shot. If you want to know our M2 Test Questions materials, you can download our free demo now. Our demo is a small part of the complete charged version. Also you can ask us any questions about M2 exam any time as you like.
M2 Pass4sure Study Materials: https://www.testpassed.com/M2-still-valid-exam.html