P.S. Free 2026 EDGE EDGE-Expert dumps are available on Google Drive shared by Exam4PDF: https://drive.google.com/open?id=1yZyQghNsbVcuzjjyK1VVHoINPegqWwpJ
With all of these EDGE-Expert study materials, your success is 100% guaranteed. Moreover, we have Demos as freebies. The free demos give you a prove-evident and educated guess about the content of our practice materials. As long as you make up your mind on this exam, you can realize their profession is unquestionable. And their profession is expressed in our EDGE-Expert training prep thoroughly. They are great help to catch on the real knowledge of EDGE-Expert exam and give you an unforgettable experience. Do no miss this little benefit we offer.
| Section | Weight | Objectives |
|---|---|---|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Water Efficiency & Materials | 25% | - Water Demand
|
| EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Energy Efficiency | 25% | - Lighting & Hot Water
|
| Software & Methodology | 25% | - EDGE Software Interface
|
>> EDGE-Expert Valid Mock Exam <<
These EDGE-Expert PDF Questions are being presented in practice test software and PDF dumps file formats. The EDGE EDGE-Expert desktop practice test software is easy to use and install on your desktop computers. Whereas the other EDGE-Expert web-based practice test software is concerned, this is a simple browser-based application that works with all operating systems. Both practice tests are customizable, simulate actual exam scenarios, and help you overcome mistakes.
NEW QUESTION # 88
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?
Answer: C
Explanation:
The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: "At the post-construction stage, the Client must provide manufacturer's data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements" (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: "Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: "Bills of quantities may support purchase verification, but manufacturer's data sheets are required for technical specifications like U-value and SHGC" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: "Window schedules may indicate glass types, but they do not replace the need for manufacturer's data sheets with U-value and SHGC at post-construction" (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: "For glazing measures, post-construction evidence must confirm the installed product's performance through manufacturer's data sheets, ensuring alignment with the design-stage claims" (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer's data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.
NEW QUESTION # 89
Which are the certification levels within the EDGE certification system?
Answer: A
Explanation:
The CBCI EDGE curriculum explains that the EDGE system uses a tiered structure that starts with resource- efficiency certification and can progress to a net-carbon outcome. The foundational level is EDGE Certified, which is achieved when a project demonstrates at least 20 percent savings in energy, water, and embodied energy in materials compared with the baseline. Above this is EDGE Advanced, which retains the same minimum 20 percent requirements for water and materials while requiring a higher performance threshold for energy, meaning at least 40 percent energy savings.
Beyond these two efficiency tiers, the system includes EDGE Zero Carbon, which builds on EDGE Certified or EDGE Advanced by addressing the project's carbon footprint through a combination of high energy efficiency, on-site or off-site renewable energy to reduce operational emissions, and carbon offsets for remaining operational emissions to reach net zero operational carbon.
The options that mention Silver, Gold, and Platinum reflect other rating systems, not EDGE. EDGE also does not use "EDGE Zero Energy" as the certification level name in the core tier list presented in the curriculum.
Therefore, the correct set of certification levels is EDGE Certified, EDGE Advanced, and EDGE Zero Carbon.
NEW QUESTION # 90
Which of the following heating systems uses Coefficient of Performance (COP) as a measure of efficiency in the EDGE software?
Answer: B
Explanation:
In EDGE, the Coefficient of Performance (COP) is used to measure the efficiency of heating systems that produce heat using a refrigeration cycle, such as heat pumps. The EDGE Methodology Report specifies: "The Coefficient of Performance (COP) is used in EDGE to evaluate the efficiency of heat pumps, including ground source heat pumps, where it is defined as the ratio of thermal output to electrical input. This metric is not applied to direct heating systems like electric heaters or boilers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C, ground source heat pump, fits this description as it operates using a refrigeration cycle to transfer heat, and its efficiency is measured by COP in EDGE. Option A (electric heater) has an efficiency typically measured as 100% (or COP of 1), but EDGE does not use COP for such systems, as noted: "Electric heaters are assumed to have a fixed efficiency in EDGE, not evaluated via COP" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (condensing boiler) uses thermal efficiency (%), not COP, as per: "Boilers in EDGE are assessed by their thermal efficiency, not COP" (EDGE Methodology Report Version 2.0, Section 5.2: Heating Systems). Option D (sensible heat recovery from exhaust air) is a heat recovery method, not a heating system, and does not use COP: "Heat recovery systems are evaluated by their heat recovery effectiveness, not COP" (EDGE User Guide, Section 4.3:
Ventilation Measures). Thus, ground source heat pump (Option C) is the correct choice.
Reference: EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.2:
Heating Systems; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.3:
Ventilation Measures.
NEW QUESTION # 91
What will reduce the hot water demand in a hotel building?
Answer: A,B,C
Explanation:
Reducing hot water demand in hotels is a key green building strategy in EDGE, focusing on both supply-side and demand-side measures. The EDGE User Guide details measures that reduce hot water demand: "Hot water demand in hotels can be reduced through supply-side measures like solar water heating and heat pumps for hot water, which decrease the energy needed to heat water, and demand-side measures like low-flow shower heads, which reduce the volume of hot water used" (EDGE User Guide, Section 5.2: Water Efficiency Measures, Section 4.2: Energy Efficiency Measures). Option B (solar water heating) reduces hot water demand by providing a renewable heat source, thus lowering energy use for heating. Option C (low-flow shower heads) directly reduces the volume of hot water used by limiting flow rates: "Low-flow shower heads can reduce hot water consumption by up to 30% in hotels" (EDGE Methodology Report Version 2.0, Section
4.2: Water Savings Calculations). Option D (heat pumps for hot water) reduces energy demand for heating water by using a more efficient system: "Heat pumps for hot water have a high COP, reducing the energy required to meet hot water demand" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option A (solar photovoltaics) generates electricity, not hot water, and does not directly reduce hot water demand:
"Solar PVs contribute to electricity generation, not hot water production" (EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures). Thus, Options B, C, and D all reduce hot water demand in a hotel.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Section 4.2: Energy Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations, Section 5.3: Energy Measures.
NEW QUESTION # 92
Utility cost savings are calculated based on reduction in total:
Answer: A
Explanation:
Utility cost savings in EDGE are calculated based on reductions in resource consumption sourced from the supply grid, as these are the costs directly borne by the building owner. The EDGE User Guide explains:
"Utility cost savings in EDGE are calculated based on the reduction in energy and water consumption from the supply grid, using local tariffs for electricity and water to convert resource savings into financial savings" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option D, energy and water consumption from the supply grid, aligns with this definition, focusing on grid-supplied resources. Option A (electricity and water consumption) is partially correct but lacks specificity about the source: "Electricity and water must be grid-supplied to be included in utility cost savings; onsite generation is excluded" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Option B (generator fuel and water consumption) is incorrect, as generator fuel is not part of utility cost savings: "Generator fuel costs are not included in utility savings, as EDGE focuses on grid-supplied utilities" (EDGE User Guide, Section 2.4:
Interpreting EDGE Results). Option C (building energy and water consumption) is too broad, including onsite sources: "Building consumption includes all sources, but utility savings are grid-specific" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Thus, energy and water from the supply grid (Option D) is the correct basis for utility cost savings.
Reference: EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results; EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations.
NEW QUESTION # 93
......
Before you buy our EDGE-Expert study questions you can have a free download and tryout and you can have an understanding of our EDGE-Expert exam questions by visiting our pages of our EDGE-Expert learning guide on the website. The pages of our EDGE-Expert guide torrent provide the demo and you can understand part of our titles and the form of our software. So before your purchase you can have an understanding of our EDGE-Expert Exam Questions and then decide whether to buy our EDGE-Expert study questions or not.
EDGE-Expert Test Engine: https://www.exam4pdf.com/EDGE-Expert-dumps-torrent.html
P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by Exam4PDF: https://drive.google.com/open?id=1yZyQghNsbVcuzjjyK1VVHoINPegqWwpJ