In compliance with syllabus of the exam, our AZ-802 preparation materials are determinant factors giving you assurance of smooth exam. Our AZ-802 actual exam comprise of a number of academic questions for your practice, which are interlinked and helpful for your exam. And there are all key points in the AZ-802 Exam Questions. Our AZ-802 study guide will be the best choice for your time, money and efforts.
| Section | Objectives |
|---|---|
| Secure and manage Windows Server environments | - Security and compliance
|
| Networking and high availability | - Networking infrastructure
|
| Compute, storage, and virtualization | - Virtual machines and containers
|
| Hybrid infrastructure management | - Monitoring and update management
|
>> Microsoft AZ-802 Hot Spot Questions <<
As is known to us, our company has promised that the AZ-802 valid study guide materials from our company will provide more than 99% pass guarantee for all people who try their best to prepare for the AZ-802 exam. If you are preparing for the AZ-802 exam by the guidance of the AZ-802 study practice question from our company and take it into consideration seriously, you will absolutely pass the AZ-802 exam and get the related certification. So do not hesitate and hurry to buy our AZ-802 study materials!
NEW QUESTION # 249
You need to meet the technical requirements for VM1. Which cmdlet should you run first? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Set-VMProcessor -VMName VM1 -ExposeVirtualizationExtensions $true
The requirement is to run virtual machines on VM1 itself, which means enabling nested virtualization so that VM1 (a guest VM hosted on Server2) can install Hyper-V and host its own virtual machines. Nested virtualization on Hyper-V requires the parent VM ' s virtual processor to expose the host ' s hardware virtualization extensions (Intel VT-x or AMD-V) through to the guest. This is done with the Set-VMProcessor cmdlet using the -ExposeVirtualizationExtensions parameter set to $true, run against VM1 from the Hyper-V host (Server2): Set-VMProcessor -VMName VM1 -ExposeVirtualizationExtensions $true. VM1 must be turned off before this setting can be applied, and after it is applied, VM1 needs the Hyper-V role installed inside the guest before it can run its own VMs. Set-VM, Set-VMBios, Set-VMHost, and Set-VMFirmware do not control virtualization extension exposure: Set-VM manages general VM configuration such as memory and name, Set-VMHost configures host-wide settings, and Set-VMFirmware/Set-VMBios control boot and firmware settings for generation 2 and generation 1 VMs respectively. Only Set-VMProcessor with - ExposeVirtualizationExtensions satisfies the stated requirement, making it the correct first step.
NEW QUESTION # 250
You have a server named Server1 that runs the Remote Desktop Session Host role service. Server1 has five custom applications installed. Users who sign in to Server1 report that the server is slow. Task Manager shows that the average CPU usage on Server1 is above 90 percent. You suspect that a custom application on Server1 is consuming excessive processor capacity. You plan to create a Data Collector Set in Performance Monitor to gather performance statistics from Server1. You need to view the resources used by each of the five applications. Which object should you add to the Data Collector Set?
Answer: A
Explanation:
The Process performance object exposes a distinct, per-instance set of counters -- including % Processor Time, Working Set, Private Bytes, and Handle Count -- broken out individually for each running executable on the system, so adding it to the Data Collector Set lets the administrator see exactly how much CPU, memory, and other resources each of the five custom applications is individually consuming, and isolate which one is actually responsible for the excessive load. The Processor and Processor Information objects instead report counters at the level of each logical or physical CPU core, aggregated across every process running on the system as a whole, giving a system-wide utilization figure without any breakdown by individual application. Processor Performance reports hardware-level frequency, idle state, and throttling counters for the CPU itself, which is also not broken out by application. Because the stated requirement is specifically to view the resources used by each of the five applications individually, and only the Process object provides that per-application breakdown, Process is the correct object to add to CollectorSet1.
NEW QUESTION # 251
You need to meet the technical requirements for VM2. What should you do?
Answer: A
Explanation:
The stated problem is that when an administrator connects to VM2 ' s console through Virtual Machine Connection and disconnects without signing out, a second administrator who opens the console can silently inherit that still-signed-in session without ever supplying credentials. By default, VMConnect attaches directly to the raw console of the guest, which behaves like walking up to a physical, unlocked machine.
Enhanced Session Mode changes this behavior by routing the VMConnect session over the Remote Desktop Protocol into the guest, which means every connection is treated as a new interactive Remote Desktop logon and therefore always prompts for credentials, eliminating the ability to passively inherit someone else ' s open session. Enabling Enhanced Session Mode requires both host-side and guest-side support (the guest operating system must support RDP and have the setting enabled) but is the direct, purpose-built fix for this exact console-sharing problem. The Guest Services integration component only enables basic file-copy functionality between host and guest and has no effect on console/session behavior. Credential Guard protects locally stored credentials from theft using virtualization-based security, and shielded VMs protect a VM ' s disk, state, and console from a compromised or malicious fabric administrator; neither addresses console session takeover between two legitimate administrators. Enhanced Session Mode is therefore the correct solution.
NEW QUESTION # 252
Your network contains an Active Directory Domain Services (AD DS) forest named contoso.com. The forest root domain contains a server named server1.contoso.com. A two-way forest trust exists between the contoso.
com forest and an AD DS forest named fabrikam.com. The fabrikam.com forest contains 10 child domains.
You need to ensure that only the members of a group named fabrikam\Group1 can authenticate to server1.
contoso.com. What should you do first?
Answer: D
Explanation:
By default, a forest trust allows any authenticated user from any domain in the trusted forest to attempt authentication to any resource in the trusting forest, subject only to the resource ' s own permissions; there is no per-resource restriction on which trusted-forest principals are even allowed to try. Selective authentication is the trust-wide setting that changes this: once enabled, users and groups from the trusted forest must be explicitly granted the " Allowed to Authenticate " permission on the specific computer object they need to reach, and only those explicitly granted principals can complete authentication to it at all. Because the requirement is to restrict authentication to server1.contoso.com down to only fabrikam\Group1, out of an entire 10-child-domain trusted forest, the necessary first step is enabling Selective authentication on the forest trust; only after that is in place does it become meaningful to then grant fabrikam\Group1 the Allowed to Authenticate permission on server1 ' s computer object, which is the next step, not the first. Changing the trust to a one-way external trust would abandon the forest-wide relationship entirely and does not itself restrict authentication to one group. Adding fabrikam\Group1 to a local group on Server1 accomplishes nothing without selective authentication enabled, since every other trusted-forest user could still authenticate too. SID filtering addresses a different concern (preventing SID-history spoofing across the trust) and plays no role in restricting which principals may authenticate to a specific server.
NEW QUESTION # 253
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. Users cannot sign in to Server1 by using domain credentials and receive the following error message: The trust relationship between this workstation and the primary domain failed. You need to restore domain authentication on Server1 without removing Server1 from the domain.
Solution: From Server1, you run Reset-ComputerMachinePassword -Server DC1. Does this meet the goal?
Answer: B
Explanation:
Reset-ComputerMachinePassword is a PowerShell cmdlet designed specifically to reset a computer ' s domain account password directly against a specified domain controller, and when run locally on the affected computer itself, here Server1, targeting DC1 with -Server, it resets and resynchronizes the computer account ' s password on both sides of the secure channel: it generates a new password, writes it to the Server1$ computer account object on DC1, and simultaneously updates Server1 ' s own local machine-account secret to match, in a single coordinated operation. Because both the AD DS side and the local Server1 side of the shared secret end up holding the same new password value, the secure channel between Server1 and the domain is fully restored, resolving the trust relationship failed error. This is done without removing Server1 from the domain at any point, satisfying the stated constraint, and without changing any domain-wide or server-wide authentication policy setting. This cmdlet, along with Test-ComputerSecureChannel -Repair, is one of Microsoft ' s two documented, non-disruptive remediation methods for a broken computer secure channel, both of which succeed precisely because they update the password consistently on both the local computer and the domain controller rather than on only one side, unlike a solution that touches only the AD DS-stored value.
NEW QUESTION # 254
......
The Administering Windows Server (AZ-802) questions are in use by many customers currently, and they are preparing for their best future daily. Even the students who used it in the past to prepare for the Microsoft Certification Exam have rated our practice questions as one of the best. You will receive updates till 365 days after your purchase, and there is a 24/7 support system that assists you whenever you are stuck in any problem or issues.
Exam AZ-802 Cram Questions: https://www.test4cram.com/AZ-802_real-exam-dumps.html