Once our professionals find the relevent knowledge on the C-ADBTP-2601 exam questions, then the whole research groups will pick out the knowledge points according to the test syllabus. Also, they will also compile some questions about the C-ADBTP-2601 practice materials in terms of their experience. Now, we have successfully summarized all knowledge points in line with the C-ADBTP-2601 outline. And meanwhile, we keep a close eye on the changes of the exam to make sure what you buy are the latest and valid.
| Section | Weight | Objectives |
|---|---|---|
| DevOps | 11-20 | - Configure and operate CI/CD pipelines for SAP BTP applications - Manage the application lifecycle using SAP BTP services - Implement monitoring and alerting for applications and services |
| Security | 11-20 | - Manage platform-level security settings and policies - Configure and maintain identity and access management (IAM) for SAP BTP - Implement audit logging and security monitoring |
| SAP Discovery Center and Service Marketplace | <10 | - Navigate and utilize SAP Discovery Center for project guidance - Find and provision services from the SAP BTP Service Marketplace |
| SAP BTP Account and Subaccount Management | 11-20 | - Create and configure global accounts and subaccounts - Manage entitlements, quotas, and runtime environments - Implement directory and environment management |
| SAP Business Application Studio / Visual Studio Code | <10 | - Integrate Visual Studio Code with SAP BTP for local development - Configure and use development environments in SAP Business Application Studio |
| Connectivity | 11-20 | - Configure and troubleshoot Cloud Connector and Destination configurations - Set up and manage connectivity between SAP BTP and on-premise systems - Manage SAP BTP networking and tunneling services |
| SAP BTP Services | 11-20 | - Integrate services with other SAP and third-party systems - Monitor service health and usage - Provision and manage SAP BTP platform services |
>> C-ADBTP-2601 Reliable Dumps <<
Our C-ADBTP-2601 exam material boosts both the high passing rate which is about 98%-100% and the high hit rate to have few difficulties to pass the test. Our C-ADBTP-2601 exam simulation is compiled based on the resources from the authorized experts’ diligent working and the real exam and confer to the past years' exam papers thus they are very practical. The content of the questions and answers of C-ADBTP-2601 Exam Questions is refined and focuses on the most important information. To let the clients be familiar with the atmosphere and pace of the real C-ADBTP-2601 exam we provide the function of stimulating the exam.
NEW QUESTION # 10
SIMULATION
Enable Service Subscriptions
In the entitlements of a directory, add a service plan for a service subscription. Assign and create this subscription to/in a subaccount of the directory.
Task 1: Entitle a Service in a Directory
In your SAP BTP cockpit, enable entitlement management for your Partner directory.
In your Partner directory, entitle the standard (Application) service plan for the SAP Build Work Zone, standard edition.
Answer:
Explanation:
See the Explanation below for complete solution.
Explanation:
Before You Start
Log in to the SAP BTP Cockpit.
Open the correct Global Account.
Go to Directories.
Open the Partner directory.
Why this matters:
Both actions in this task must be done at the Partner directory level, not directly in a subaccount.
Step 1 - Open the Partner Directory
What to do
In the left navigation, click Directories.
Select Partner.
Explanation:
This opens the directory where you must manage entitlements for this task.
What to verify
You should now be inside the Partner directory page.
Step 2 - Open Entitlements
What to do
Inside the Partner directory, go to Entitlements.
Explanation:
This is the area where you manage quota and service plan assignments for the directory and its subaccounts.
What to verify
You should see the entitlements page for Partner.
Step 3 - Enable Entitlement Management for the Partner Directory
What to do
In the Entitlements area, look for the option to Enable Entitlement Management.
Click Enable.
Explanation:
A directory must have entitlement management enabled before you can add and manage service plans there.
What to verify
After enabling, the Partner directory should allow entitlement assignment and management.
Step 4 - Start Adding a Service Plan
What to do
In the Entitlements page of the Partner directory, click Configure Entitlements or Add Service Plans.
Explanation:
This opens the service catalog where you can select the service and plan to add.
What to verify
You should see the list of available services and plans.
Step 5 - Find the Required Service
What to do
Search for or scroll to:
SAP Build Work Zone, standard edition
Select that service.
Explanation:
You must choose the exact service named in the task. Be careful not to select a different SAP Build service by mistake.
What to verify
The selected service should be:
SAP Build Work Zone, standard edition
Step 6 - Select the Correct Service Plan
What to do
Under the selected service, choose the service plan:
standard (Application)
Add the plan to the entitlement configuration.
Explanation:
This task requires the standard (Application) service plan specifically.
Do not choose another plan if more than one is listed.
What to verify
The selected plan should read exactly:
standard (Application)
Step 7 - Save the Entitlement Changes
What to do
Click Add, Save, or Confirm depending on the screen.
Then click Save for the entitlement configuration.
Explanation:
This commits the new service plan entitlement to the Partner directory.
What to verify
After saving, the entitlements list for Partner should include:
SAP Build Work Zone, standard edition
plan: standard (Application)
Final Expected Result for Task 1
Inside the Partner directory:
Entitlement management is enabled
The service SAP Build Work Zone, standard edition is entitled
The plan standard (Application) is added
Common Mistakes to Avoid
1. Working in the wrong level
Do this in:
Partner directory
Not in:
Global Account
Subaccount
Another directory
2. Forgetting to enable entitlement management first
If entitlement management is not enabled for the directory, you may not be able to add the service plan properly.
3. Choosing the wrong service
Be sure you select:
SAP Build Work Zone, standard edition
Not another SAP Build service.
4. Choosing the wrong plan
You must select:
standard (Application)
NEW QUESTION # 11
SIMULATION
Establish Shared Services
Task 2: Entitle and Subscribe a Service in a Shared Subaccount
In your SAP BTP cockpit, in your SH Dev subaccount, entitle one standard (Application) service plan for the SAP Build Work Zone, advanced edition.
In the SH Dev subaccount, establish a trust to the agvlamkzw.accounts.ondemand.com identity provider.
In your SH Dev subaccount, create a service subscription for SAP Build Work Zone, advanced edition with the standard service plan.
Answer:
Explanation:
See the Explanation below for complete solution.
Explanation:
Before you start
Log in to SAP BTP Cockpit.
Open your correct Global Account.
Go to the Shared Services directory.
Open the SH Dev subaccount.
This matters because all three required actions must be done inside SH Dev, not in the directory and not in another subaccount.
Part 1 - Entitle the service in SH Dev
Step 1 - Open the subaccount
In the cockpit, choose Directories.
Open Shared Services.
Select SH Dev.
You should now be on the SH Dev subaccount page.
Step 2 - Open Entitlements
In SH Dev, choose Entitlements.
SAP documents that service plans and quotas for a subaccount are added in the subaccount's Entitlements are a.
Step 3 - Add the required service plan
Click Configure Entitlements or Add Service Plans.
Search for SAP Build Work Zone, advanced edition.
Select the service.
Choose the plan standard (Application).
Set the quantity to 1 if a quota/amount field is shown.
Save the entitlement changes.
This task explicitly asks for one standard (Application) service plan. SAP Help also notes that SAP Build Work Zone usage depends on the correct entitlement being available in the subaccount first.
Verify
Under Entitlements, you should now see:
SAP Build Work Zone, advanced edition
plan: standard (Application)
quantity: 1 if shown
Part 2 - Establish trust to the identity provider
Step 4 - Open Trust Configuration
In SH Dev, go to Security.
Choose Trust Configuration.
SAP Help states that trust to a custom identity provider is established from Security > Trust Configuration in the SAP BTP cockpit.
Step 5 - Create the trust
Click Establish Trust.
Enter or select the identity provider:
agvlamkzw.accounts.ondemand.com
Continue through the wizard.
Save the trust configuration.
SAP documents that to use a custom identity provider, the subaccount must have a trust relationship to that provider. SAP also highlights that apps such as SAP Build Work Zone rely on SAP Cloud Identity Services trust configuration.
Verify
On the Trust Configuration page, you should see:
agvlamkzw.accounts.ondemand.com
as a trusted identity provider.
Part 3 - Create the subscription
Step 6 - Open Instances and Subscriptions
In SH Dev, go to Services.
Choose Instances and Subscriptions.
Step 7 - Create the subscription
Click Create.
Choose Subscription if the cockpit asks for a type.
Search for SAP Build Work Zone, advanced edition.
Select the service.
Choose the plan standard.
Confirm the creation.
SAP Help for SAP Build Work Zone scenarios indicates that the subaccount needs the correct entitlements and subscription flow to expose and use SAP Build Work Zone content.
Step 8 - Confirm subscription status
Stay on Instances and Subscriptions.
Check that the new subscription appears and is active.
Verify
You should see:
SAP Build Work Zone, advanced edition
plan: standard
subscription created successfully
Final expected result
Inside SH Dev:
the entitlement for SAP Build Work Zone, advanced edition exists
the entitled plan is standard (Application)
trust is established to agvlamkzw.accounts.ondemand.com
a subscription exists for SAP Build Work Zone, advanced edition
the subscription uses the standard plan
Common mistakes to avoid
Doing the entitlement in Shared Services directory instead of SH Dev
Choosing SAP Build Work Zone, standard edition instead of advanced edition Choosing the wrong plan; the entitlement must be standard (Application) Forgetting the trust step to agvlamkzw.accounts.ondemand.com Trying to subscribe before the entitlement exists
NEW QUESTION # 12
SIMULATION
Create a Service Instance in Cloud Foundry
Enable a service instance of the HTLM5 Application Repository Service for Cloud Foundry.
Create a Service Instance in a Cloud Foundry Environment
In your SAP BTP cockpit, in the EU HCM Dev subaccount, create the service instance html5-eu-hcm-dev for the HTLM5 Application Repository Service with the service plan app-host in the Cloud Foundry space activity-recording
Answer:
Explanation:
See the Explanation below for complete solution.
Explanation:
Before you start
Log in to SAP BTP Cockpit.
Open the correct Global Account.
Go to Directories.
Open Human Resources.
Open the EU HCM Dev subaccount.
This matters because the task must be completed in EU HCM Dev, and the service instance must be created in the specific Cloud Foundry space activity-recording. SAP Help also confirms that the HTML5 Application Repository is used in the Cloud Foundry environment and that the app-host plan is the host service used to store HTML5 application content.
Step 1 - Open the Cloud Foundry space
In EU HCM Dev, go to:
Cloud Foundry
Spaces
Select the space:
activity-recording
SAP Help describes creating Cloud Foundry service instances by first navigating to the subaccount, opening Cloud Foundry Spaces, selecting the target space, and then using that space's Services > Service Instances are a.
Step 2 - Open Service Instances in the space
Inside the activity-recording space, go to:
Services
Service Instances
This is the Cloud Foundry-space-level location used for creating service instances in that space.
Step 3 - Start creating the new instance
Click Create.
A wizard opens for the new service instance. SAP Help describes this as the standard cockpit flow for creating service instances in Cloud Foundry spaces.
Step 4 - Choose the required service
In the service selection, choose:
HTML5 Application Repository Service
SAP Help documents the HTML5 Application Repository as the service used for centrally storing HTML5 applications' static content on SAP BTP in the Cloud Foundry environment.
Step 5 - Choose the required service plan
Select the service plan:
app-host
SAP Help states that the app-host service plan is used to deploy applications to the HTML5 Application Repository.
Step 6 - Enter the instance name
Set the service instance name to:
html5-eu-hcm-dev
Then continue and confirm creation.
SAP Help recommends using a CLI-friendly name for service instances, and the task gives the exact required name.
Step 7 - Verify the space is correct
Before final confirmation, verify the target Cloud Foundry space is:
activity-recording
This is important because Cloud Foundry service instances are created within a specific space, not only at the subaccount level.
Step 8 - Create and confirm
Click Create or Finish.
Wait for the status to change from in-progress to created.
SAP Help notes that after creation, the instance appears in the service instances table and its status can be checked there.
Final expected result
Inside EU HCM Dev, in Cloud Foundry space activity-recording, you should have a service instance with:
Service: HTML5 Application Repository Service
Plan: app-host
Instance Name: html5-eu-hcm-dev
Common mistakes to avoid
Creating the instance in the wrong subaccount; it must be EU HCM Dev.
Creating it in the wrong Cloud Foundry space; it must be activity-recording.
Choosing the wrong service; use HTML5 Application Repository Service.
Choosing the wrong plan; use app-host. SAP Help specifically links app-host with hosting deployed HTML5 app content.
Typing the wrong instance name; use exactly html5-eu-hcm-dev.
NEW QUESTION # 13
SIMULATION
Task 2: Create Subaccounts in a Directory
In the Partner directory, create the subaccount AM PA Dev Test (Description: Partner Development and Testing) with subdomain btpops####-am-pa-dev-test in the region Microsoft Azure → US West (WA) cf-us20.
In the Partner directory, create the subaccount AM PA Prod (Description: Partner Production) with subdomain btpops####-am-pa-prod using AM PA Dev Test as source subaccount. Set the subaccount as used in production.
Answer:
Explanation:
See the Explanation below for complete solution.
Explanation:
Task 2 - Create Subaccounts in a Directory
You must create these two subaccounts inside the Partner directory:
AM PA Dev Test
AM PA Prod
Important:
Replace #### with your global account number
Enter all names and subdomains exactly
Be careful with hyphens and spaces
AM PA Prod must be marked as used in production
Before You Start
Log in to SAP BTP Cockpit.
Open your correct Global Account.
Go to Directories.
Open the Partner directory.
Why this matters:
Both subaccounts in this task must be created inside the Partner directory. If you create them under the global account or another directory, the task will be wrong.
Step 1 - Open the Partner Directory
What to do
In the left menu, click Directories.
In the directory list, select Partner.
Explanation:
The Partner directory is the container where both required subaccounts must be created.
What to verify
You should now be inside the Partner directory page.
Step 2 - Start Creating the First Subaccount
What to do
Inside the Partner directory, go to Subaccounts.
Click Create → Subaccount.
Explanation:
This opens the subaccount creation screen.
What to verify
You should now see the form for creating a new subaccount.
Step 3 - Enter Data for AM PA Dev Test
What to do
Enter the following values:
Display Name / Name: AM PA Dev Test
Description: Partner Development and Testing
Subdomain: btpops####-am-pa-dev-test
Then choose the region:
Cloud Provider: Microsoft Azure
Region: US West (WA)
Environment / Technical Region: cf-us20
After checking all values, click Create.
Explanation:
This creates the development and testing subaccount for the Partner directory.
The important points are:
the subaccount name must match exactly
the subdomain must include your account number in place of ####
the region must be Microsoft Azure → US West (WA) cf-us20
What to verify
After creation, you should see the new subaccount:
AM PA Dev Test
inside the Partner directory.
Step 4 - Confirm the First Subaccount Exists
What to do
Check the subaccounts list under Partner.
Explanation:
Before creating the production subaccount, confirm that AM PA Dev Test was created successfully, because it will be used as the source subaccount for the next step.
What to verify
You should see:
AM PA Dev Test
If it is not there, do not continue until it is created correctly.
Step 5 - Start Creating the Second Subaccount
What to do
Still inside the Partner directory, click Create → Subaccount again.
Explanation:
This opens a new subaccount creation form for the production subaccount.
Step 6 - Enter Data for AM PA Prod
What to do
Enter the following values:
Display Name / Name: AM PA Prod
Description: Partner Production
Subdomain: btpops####-am-pa-prod
Then set:
Source Subaccount: AM PA Dev Test
Enable the production setting:
Used in Production: Yes
Then click Create.
Explanation:
This creates the production subaccount by using AM PA Dev Test as the source subaccount.
Using a source subaccount means SAP BTP copies base settings from the selected source, which helps keep configuration aligned.
The production indicator is mandatory here because this is the production subaccount.
What to verify
After creation, you should see:
AM PA Prod
inside the Partner directory, and it should be marked as a production subaccount.
Final Expected Result for Task 2
Inside the Partner directory, you must have these two subaccounts:
1. AM PA Dev Test
Description: Partner Development and Testing
Subdomain: btpops####-am-pa-dev-test
Region: Microsoft Azure → US West (WA) cf-us20
2. AM PA Prod
Description: Partner Production
Subdomain: btpops####-am-pa-prod
Source Subaccount: AM PA Dev Test
Used in Production: Yes
Common Mistakes to Avoid
1. Creating the subaccounts in the wrong place
Both subaccounts must be created in:
Partner directory
Not in:
Global Account
Americas
Eurasia
Human Resources
2. Wrong subdomain format
Use exactly:
btpops####-am-pa-dev-test
btpops####-am-pa-prod
Replace only #### with your global account number.
Do not:
remove hyphens
add spaces
misspell dev-test or pa-prod
3. Wrong region for AM PA Dev Test
It must be:
Microsoft Azure
US West (WA)
cf-us20
4. Forgetting the source subaccount for AM PA Prod
You must select:
AM PA Dev Test
as the source subaccount.
5. Forgetting the production flag
For AM PA Prod, make sure:
Used in Production is enabled
NEW QUESTION # 14
......
Actual Administrating SAP Business Technology Platform(C_ADBTP_2601) (C-ADBTP-2601) dumps are designed to help applicants crack the SAP C-ADBTP-2601 test in a short time. There are dozens of websites that offer C-ADBTP-2601 exam questions. But all of them are not trustworthy. Some of these platforms may provide you with Administrating SAP Business Technology Platform(C_ADBTP_2601) (C-ADBTP-2601) invalid dumps. Upon using outdated SAP C-ADBTP-2601 dumps you fail in the Administrating SAP Business Technology Platform(C_ADBTP_2601) (C-ADBTP-2601) test and lose your resources.
Instant C-ADBTP-2601 Discount: https://www.examprepaway.com/SAP/braindumps.C-ADBTP-2601.ete.file.html