참고: ITDumpsKR에서 Google Drive로 공유하는 무료, 최신 PT-AM-CPE 시험 문제집이 있습니다: https://drive.google.com/open?id=1vzKiVUudxpWndJaomK1EiU3Qyo1AxzRH
국제공인자격증을 취득하여 IT업계에서 자신만의 자리를 잡고 싶으신가요? 자격증이 수없이 많은데Ping Identity PT-AM-CPE 시험패스부터 시작해보실가요? 100%합격가능한 Ping Identity PT-AM-CPE덤프는Ping Identity PT-AM-CPE시험문제의 기출문제와 예상문제로 되어있는 퍼펙트한 모음문제집으로서 시험패스율이 100%에 가깝습니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
다년간 IT업계에 종사하신 전문가들이 자신의 노하우와 경험으로 제작한 Ping Identity PT-AM-CPE덤프는 PT-AM-CPE 실제 기출문제를 기반으로 한 자료로서 PT-AM-CPE시험문제의 모든 범위와 유형을 포함하고 있어 높을 적중율을 자랑하고 있습니다.덤프구매후 불합격 받으시면 구매일로부터 60일내 주문은 덤프비용을 환불해드립니다.IT 자격증 취득은 ITDumpsKR덤프가 정답입니다.
질문 # 58
Which of the following approaches can be used to configure a basic installation of PingAM?
정답：A
설명：
According to the PingAM 8.0.2 Installation Guide, once the am.war file has been deployed into a web container (such as Apache Tomcat), the administrator must perform an initial configuration to set up the configuration store and the primary administrative user (amAdmin). PingAM provides two primary pathways for this "basic" configuration to accommodate different environment needs:
GUI-based Configuration (Interactive): By accessing the AM deployment URL (e.g., https://auth.example.com:8443/am) in a standard web browser, the administrator is presented with an interactive setup wizard. This wizard guides the user through the license agreement, setting the amAdmin password, and defining the connection details for the Configuration Store (typically PingDS). This is the preferred method for single-instance setups or initial trials.
Command-Line Configuration (Automated/Passive): For DevOps-centric deployments, headless environments, or automated scripts, PingAM provides the configurator.jar (often used for "Passive" installations). Additionally, for version 8 deployments, Amster is the primary command-line interface (CLI) tool. Amster allows administrators to import a full configuration state from JSON files, bypassing the GUI entirely. This is crucial for CI/CD pipelines and Kubernetes-based deployments (like the ForgeOps CDK/CDP).
The flexibility to use either the browser-based GUI or command-line tools ensures that PingAM can be deployed efficiently across diverse infrastructures, from traditional on-premises servers to modern cloud-native orchestration platforms. Therefore, Option A is the correct answer as it recognizes both valid administrative interfaces for the initial setup.
질문 # 59
After installing a PingAM instance with the configuration directory path set to /home/forgerock/am, where is the default directory that contains the debug log files?
정답：A
설명：
When PingAM is installed, it creates a specific directory structure within its Configuration Directory (also known as the AM_HOME or .openamcfg pointer target). This structure is standardized across versions to ensure that administrators and automated scripts can locate critical files.
According to the PingAM 8.0.2 "File System Reference" and "Debug Logging" documentation:
The primary directory for engine-level troubleshooting files (debug logs) is named debug.17 This directory is located immediately within the root of the configuration directory. Therefore, if the configuration path is explicitly set to /home/forgerock/am, the resulting path for debug files will be /home/forgerock/am/debug (Option D).
It is important to distinguish between Audit Logs and Debug Logs:
Audit Logs: (e.g., access.audit.json) are usually found in the .../openam/log or .../openam/logs directory (making Option A a common distractor).
Debug Logs: (e.g., amAuth, amSession, amCore) are strictly stored in the debug directory.
The var directory (Options B and C) is a convention used in some ForgeRock "ForgeOps" containerized deployments (like those in Kubernetes) to separate variable data from static config. However, in a standard standalone installation as described in the question, the direct .../debug path is the verified default behavior of the PingAM installation wizard and configurator tool.
질문 # 60
Why should module-based authentication be disabled in production?
정답：C
설명：
In PingAM 8.0.2, there is a critical distinction between Tree-based (or Chain-based) authentication and Module-based authentication. Module-based authentication is a legacy feature that allows a user to target an individual authentication module directly (e.g., .../UI/Login?module=DataStore).
According to the "Security Considerations" and "Hardening PingAM" documentation, module-based authentication poses a significant security risk and should be disabled in production. This is because it allows a user to bypass steps in an authentication chain (Option C).
If an administrator has designed a secure "Chain" that requires both a DataStore (password) check AND a One-Time Password (MFA) check, the intention is for these to be inseparable. However, if module-based authentication is enabled, a malicious user or a tester could bypass the MFA requirement by crafting a URL that calls only the "DataStore" module. This effectively circumvents the multi-factor security logic intended by the administrator.
To mitigate this, PingAM provides a global and realm-level setting to "Disable Module-based Authentication." Once disabled, PingAM will only process authentication requests that target a named Authentication Tree or Chain, ensuring that the user is forced through the entire sequence of nodes and logic defined by the security architect.
질문 # 61
What are the possible outcomes of the Push Result Verifier node?
정답：A
설명：
The Push Result Verifier node is a core component of the "MFA: Push Authentication" journey in PingAM 8.0.2. Its primary function is to check the status of a push notification that was previously dispatched to a user's mobile device (usually via the Push Sender node).22 According to the "Authentication Node Reference" for version 8.0.2, the node evaluates the state of the push request and yields exactly four distinct outcomes:
Success: This path is followed if the user has actively approved the push notification on their registered device using the ForgeRock/Ping Authenticator app.
Failure: This path is taken if the user explicitly denies or rejects the push notification on their device, indicating a potential unauthorized login attempt.
Expired: This outcome occurs if the notification reaches its "Message Timeout" limit (defined in the Push Sender node) without any response from the user.23 In standard trees, this path often loops back to allow the user to try a different MFA method or resend the push.
Waiting: This outcome is triggered if a response has not yet been received but the timeout has not yet been reached. This is used in conjunction with a Push Wait or Polling mechanism to create a "check-and-loop" logic until a final result (Success, Failure, or Expired) is determined.
The Retry outcome (mentioned in other options) is notably absent from this specific node's metadata. While a "Retry" might be implemented in the overall tree logic (for example, by using a Retry Limit Decision node after an Expired outcome), the Push Result Verifier node itself only reports the state of the specific push transaction it is tracking. Understanding these four discrete states is vital for designing resilient authentication journeys that handle user delays or network issues gracefully.
질문 # 62
When removing a forgeops deployment created with the Cloud Developer Kit (CDK) with the following command:
$ /path/to/forgeops/bin/forgeops delete
What components are removed from the deployment?
정답：A
설명：
The forgeops command-line tool is used to manage the lifecycle of the Ping Identity Platform in Kubernetes environments.9 When using the Cloud Developer Kit (CDK) for version 8.0.2, the delete subcommand is used to tear down the environment.
According to the "ForgeOps CLI Reference" and "CDK Shutdown and Removal" documentation:
The forgeops delete command (without additional flags like --force or specific component names) is designed to remove the Ping Identity Platform pods. This includes the core applications like PingAM, PingIDM, and PingDS, as well as the specialized UI pods (login-ui, etc.). It also removes the standard CDK artifacts and configuration manifests associated with that specific namespace.
However, the command follows a "safe delete" philosophy regarding infrastructure-level components:
Ingress Controllers, Certificate Managers (cert-manager), and the DS Operator are considered part of the "Base" or "Infrastructure" layer. These are typically installed once per cluster or namespace and are shared across multiple deployments. The forgeops delete command does not remove these by default, as doing so could disrupt other services.
PVCs (Persistent Volume Claims) and Secrets are also preserved unless the --force or -f flag is explicitly added to the command.
Thus, the answer is D. The command focuses strictly on the platform pods and their immediate deployment artifacts. If a developer wishes to perform a "deep clean" that removes the ingress and operators, they would need to use more specific commands like forgeops delete base or kubectl commands.10 This distinction is vital for developers to avoid accidentally deleting shared cluster infrastructure when they only intended to restart the Ping platform.
질문 # 63
......
ITDumpsKR는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITDumpsKR 표 Ping Identity인증PT-AM-CPE시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITDumpsKR 표 Ping Identity인증PT-AM-CPE덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
PT-AM-CPE최신 시험 공부자료: https://www.itdumpskr.com/PT-AM-CPE-exam.html
BONUS!!! ITDumpsKR PT-AM-CPE 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1vzKiVUudxpWndJaomK1EiU3Qyo1AxzRH