Do you want to pass your exam with the least time? If you do, then we will be your best choice. H19-404_V1.0 training materials are edited and verified by experienced experts in this field, therefore the quality and accuracy can be guaranteed. Besides H19-404_V1.0 exam materials contain both questions and answers, and it’s convenient for you to have a check after practicing. We have online and offline chat service, if you have any questions about H19-404_V1.0 Training Materials, you can consult us, we will give you reply as quickly as possible.
| Section | Objectives |
|---|---|
| Topic 1: Switching and Routing in Campus Networks | - Layer 2 and Layer 3 design principles - VLAN and segmentation design |
| Topic 2: Network Security Design | - Access control strategies - Campus security architecture considerations |
| Topic 3: Campus Network Fundamentals | - Enterprise campus network architecture principles - Typical campus network deployment models |
| Topic 4: WLAN Planning and Design | - Wireless coverage planning - Capacity and performance design considerations |
| Topic 5: Huawei Campus Network Solutions | - iMaster NCE-Campus management platform - CloudCampus solution architecture |
| Topic 6: Presales Solution Design | - Customer requirement analysis - Solution proposal and design methodology |
>> H19-404_V1.0 Relevant Questions <<
Huawei exam simulation software is the best offline method to boost preparation for the Huawei H19-404_V1.0 examination. The software creates a H19-404_V1.0 real practice test-like scenario where aspirants face actual H19-404_V1.0 exam questions. This feature creates awareness among users about HCSE-Presales-Campus Network Planning and Design V1.0 exam pattern and syllabus. With the desktop Huawei H19-404_V1.0 Practice Exam software, you can practice for the test offline via any Windows-based computer.
NEW QUESTION # 44
Which of the following statements is true about an AP's transmit power?
Answer: B
Explanation:
An AP's transmit power must be maintained within an appropriate range. Excessive power does not automatically improve service quality. A high-power AP can enlarge its interference domain, create co- channel or adjacent-channel interference, produce asymmetric uplink and downlink coverage, and cause sticky-client behavior because a station continues hearing an AP even when its weaker transmission cannot reliably reach that AP. Huawei states that high-power APs can interfere with adjacent APs and that radio calibration dynamically adjusts AP channels, power, and frequency bands to ensure coverage while minimizing interference.
Conversely, power that is too low creates coverage holes, weak received signal strength, low modulation rates, retransmissions, and roaming instability. When a new AP is added, neighboring APs may reduce their transmit power to limit interference. When an AP goes offline, neighboring APs may increase power to compensate for the missing coverage. The engineering objective is therefore neither maximum nor minimum power, but sufficient coverage with controlled overlap and minimum interference. Accordingly, option B is correct.
NEW QUESTION # 45
Intelligent policy recommendation can achieve network-level load balancing.
Answer: B
Explanation:
The statement is true. Intelligent policy recommendation does not consider only the traffic load of an individual interface or device. iMaster NCE-Campus obtains network topology, application, link-quality, bandwidth-utilization, and traffic-distribution information from multiple devices. It can then recommend or orchestrate policies that distribute traffic across the network's available paths and resources.
For example, when multiple WAN links have the same priority and satisfy an application's SLA requirements, per-flow load balancing can distribute different application flows among those links.
Bandwidth-proportional balancing can also account for differences in link capacity, preventing a lower- bandwidth link from being overloaded. Huawei explains that load-balancing-based traffic steering can fully utilize multiple links and distribute flows across links meeting the required SLA.
Because iMaster NCE-Campus centrally manages CPEs and uniformly orchestrates service intent across the overlay network, recommendations can be evaluated from a network-wide perspective instead of through isolated local decisions. Therefore, intelligent policy recommendation can implement network-level load balancing.
NEW QUESTION # 46
If multiple Internet links are available, these links cannot be prioritized and can only be load-balanced.
Answer: A
Explanation:
The statement is false because Huawei SD-WAN supports both priority-based link selection and load balancing. Multiple Internet or WAN links do not have to be treated equally. An administrator can define a preferred or primary link and designate another link as secondary or backup according to application requirements, link quality, cost, bandwidth, or operational policy.
For delay- and packet-loss-sensitive services such as voice and video, a higher-quality link can be configured as the primary path and another link as the backup. If the primary link no longer satisfies the configured SLA thresholds, traffic can be dynamically switched to a better path. Huawei's material explicitly describes primary and secondary link selection based on SLA and also presents load-balancing-based steering as a separate option.
Load balancing is useful when an enterprise wants to utilize the bandwidth of multiple links concurrently.
Priority-based active/standby forwarding is preferable when one provider offers better quality or when one circuit should be reserved for critical services. Intelligent traffic steering can additionally consider application priority and current bandwidth utilization. Therefore, multiple links can be prioritized, load-balanced, or used in a policy-controlled combination, making option B correct.
NEW QUESTION # 47
Which of the following can be prevented by using the unauthorized access prevention function of Huawei switches?
Answer: A,D
Explanation:
Huawei switches' unauthorized access prevention function can prevent users from connecting unauthorized hubs and sharing network access through unauthorized Wi-Fi hotspots. An unauthorized hub allows multiple terminals to enter the network through a port intended for a single managed endpoint. This can bypass normal terminal-count limitations, admission controls, and access-policy enforcement.
Unauthorized Wi-Fi hotspot sharing occurs when a user connects an authenticated endpoint to the enterprise network and then enables hotspot or connection-sharing functionality. Other terminals can subsequently access the network through that endpoint without completing the required authentication process. Huawei switches can analyze terminal behavior, MAC-address relationships, packet characteristics, and access patterns to identify and restrict this behavior.
A USB flash drive is a local storage device and does not provide Ethernet network access, so option A is unrelated to switch-based unauthorized network access prevention. An unauthorized router is normally controlled through device identification, NAC, port security, or explicit access policies rather than the specific hub and hotspot-sharing prevention function described by this question.
Huawei intelligent terminal management combines terminal identification, authorization, traffic analysis, and bogus-terminal detection to achieve visualized access and prevent unauthorized connectivity.
NEW QUESTION # 48
On a large campus network, inter-WAC roaming should be avoided as much as possible to ensure the roaming experience.
Answer: B
Explanation:
The statement is true as a WLAN design recommendation. Inter-WAC roaming is supported, but it introduces more control-plane interaction and forwarding complexity than intra-WAC roaming. The Home WAC and Foreign WAC must belong to the same mobility group, synchronize station and AP information, and establish an inter-WAC CAPWAP tunnel for control information and, in some scenarios, service forwarding.
Additional synchronization, tunnel processing, route handling, and failure dependencies can increase roaming delay and complicate troubleshooting. This is especially relevant for delay-sensitive applications such as voice, video, automated guided vehicles, and real-time production systems. A better design places APs between which users frequently move under the same WAC wherever controller capacity and physical topology permit.
Avoiding inter-WAC roaming does not mean disabling the function entirely. Large campuses may require multiple WACs for scale, redundancy, or geographic distribution. Mobility groups should still be configured for unavoidable cross-controller movement. However, buildings, floors, and continuous roaming areas should be assigned carefully so that normal roaming remains intra-WAC. Therefore, the recommendation in the statement is correct, and the answer is True.
NEW QUESTION # 49
......
As for Huawei H19-404_V1.0 Certification Training, Itcertkey is the leader of candidates to provide H19-404_V1.0 exam prep and H19-404_V1.0 certification. Itcertkey IT senior experts collate the braindumps, guarantee the quality! Any place can be easy to learn with pdf real questions and answers! After you purchase our products, we provide free update service for a year.
H19-404_V1.0 Valid Test Dumps: https://www.itcertkey.com/H19-404_V1.0_braindumps.html