ExamPassdump Cisco인증350-101시험덤프 구매전 구매사이트에서 무료샘플을 다운받아 PDF버전 덤프내용을 우선 체험해보실수 있습니다. 무료샘플을 보시면ExamPassdump Cisco인증350-101시험대비자료에 믿음이 갈것입니다.고객님의 이익을 보장해드리기 위하여ExamPassdump는 시험불합격시 덤프비용전액환불을 무조건 약속합니다. ExamPassdump의 도움으로 더욱 많은 분들이 멋진 IT전문가로 거듭나기를 바라는바입니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
지금 같은 상황에서 몇년간Cisco 350-101시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게Cisco 350-101시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ExamPassdump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의350-101시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ExamPassdump 여러분은350-101시험관련 최신버전자료들을 얻을 수 있습니다. ExamPassdump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
질문 # 34
In an RF environment, what does high interference result in?
정답：D
설명：
High interference in a wireless RF environment disrupts the predictable behavior of 802.11 channels. Interference comes from co-channel devices, neighboring APs, non-Wi-Fi sources like microwave ovens, cordless phones, or other electronic equipment operating in the same frequency band. When interference is present, the channel experiences fluctuating noise levels, increased frame collisions, and packet loss, all of which lead to inconsistent channel performance.
This inconsistency manifests as variable throughput, increased retransmissions, and irregular latency, directly impacting both client experience and AP scheduling decisions. While frame aggregation may fail under interference, the primary and systemic effect is the variability in channel quality, not the failure of aggregation alone. Scheduled contention access (option C) is an intentional protocol mechanism of EDCA or TXOP scheduling, which operates independently of interference levels. Extended coverage patterns (option D) are the result of antenna design or AP placement, not RF interference.
Cisco's Wireless Design Guide emphasizes that RF interference results in erratic channel behavior, requiring careful channel planning, power adjustment, and spectrum analysis using tools such as Cisco DNA Spaces or Spectrum Expert to restore consistent performance.
질문 # 35
An engineer has been tasked with configuring a Cisco Catalyst 9100 AP to join a WLC using a static configuration as DHCP and DNS discovery methods are not available. The engineer has set the AP hostname to `AP053540555', and has configured the AP with a static IP address, subnet mask, and default gateway. The engineer must now configure the AP to discover the primary WLC with hostname `WLC-PRIMARY' and IP address `192.168.100.10'. Which CLI command must the engineer use on the AP?
정답：A
설명：
The correct AP-side command is capwap ap primary-base WLC-PRIMARY 192.168.100.10.
Cisco's Catalyst AP command reference shows the syntax for configuring the primary controller as capwap ap primary-base <controller-name> <controller-ip-address>, and provides the same structure in its example: capwap ap primary-base wlc-5520 209.165.200.224. Cisco's Catalyst
9800 AP join documentation also identifies the primary controller discovery entry as capwap ap primary-base <wlc-hostname> <wlc-IP-address>.
This command statically primes the lightweight AP with the preferred WLC when DHCP option
43, DNS discovery, broadcast discovery, or prior learned controller information is unavailable.
The hostname AP053540555 is only the AP's local identity and is not part of the WLC discovery command. Option A omits the primary-base keyword, so it is not valid syntax. Option B places keywords in the wrong order and does not match Cisco CAPWAP AP CLI. Option C omits the required controller name before the IP address.
질문 # 36
Users report slowness on the network, and it is suspected that certain applications are consuming all the bandwidth. A network engineer must enable the NBAR protocol to improve wireless client traffic visibility and provide advanced, granular, application classification, and analytics. How should the network engineer configure NBAR on a 9800 WLC?
정답：C
설명：
The correct configuration approach is to enableApplication Visibility and Controlon thepolicy profile. On the Catalyst 9800, WLANs are not configured as isolated monolithic objects; the WLAN profile is mapped to a policy profile through a policy tag, and many client traffic services are applied from that policy profile. Cisco defines AVC as the wireless feature set that identifies and monitors applications using DPI, creates rules to manage application bandwidth and usage, and integrates with Flexible NetFlow for per-application or per- protocol statistics. Cisco further states that AVC benefits from NBAR running on the AP or controller, and that the NBAR2 engine analyzes and recognizes traffic flows.
Operationally, Cisco's 9800 AVC guide shows that AVC is enabled by navigating toConfiguration > Services
> Application Visibilityand selecting the relevantPolicy Profile. It also shows the CLI form under the policy profile:wireless profile policy AVC_testingfollowed byip nbar protocol-discovery, with verification showingNBAR Protocol Discovery : Enabled. Options A and B are incorrect because the feature is not enabled directly on the WLAN. Option C is generic and incomplete; the Cisco feature construct is AVC.
Reference topics:AVC, NBAR2, Flexible NetFlow, Catalyst 9800 policy profiles, and wireless application visibility.
질문 # 37
A school district is deploying Cisco Catalyst 9176 APs to remote sites with occasional WAN outages. The IT team wants the APs to attempt joining a secondary or tertiary Catalyst 9800 WLC if the primary controller is unreachable. The team must preconfigure all controller IP addresses using the AP CLI before deploying.
Which set of CLI commands sets the primary, secondary, and tertiary controller IP addresses on a Catalyst
9176 AP?
정답：D
설명：
Cisco lightweight and Catalyst access points use CAPWAP for AP-to-controller discovery and join operations. For AP-side preconfiguration, Cisco documents the syntax as capwap ap {primary-base | secondary-base | tertiary-base} controller-name controller-ip-address, specifically for configuring primary, secondary, and tertiary controllers on the AP. This matches option B exactly because it includes the CAPWAP AP command, the controller priority keyword, the controller name, and the controller management IP address. (Cisco) The Catalyst 9800 AP join process also recognizes these configured controller entries in priority order:
primary controller using capwap ap primary-base, secondary controller using capwap ap secondary-base, and tertiary controller using capwap ap tertiary-base. (Cisco) This allows the AP to attempt a backup controller when the preferred controller is unavailable, which is appropriate for remote sites with intermittent WAN reachability. Option A uses obsolete or invalid setcontroller syntax. Option C invents an ap join command format. Option D incorrectly inserts wlc into the AP CAPWAP command. Reference topics:Wireless Network Implementation -CAPWAP discovery, AP join process, Catalyst 9800 controller redundancy, and AP CLI provisioning.
질문 # 38
A wireless engineer must manage a scheduled maintenance window for a mesh network within a network that uses Cisco Catalyst Center as the primary monitoring solution. The engineer must coordinate downtime and verify that all services resume as intended after planned tasks are complete. How does the engineer avoid unnecessary alerting in Cisco Catalyst Center throughout the maintenance window?
정답：D
설명：
In Cisco Catalyst Center, device suppression is the recommended method to prevent unnecessary alerts during planned maintenance windows. By enabling device suppression, the system temporarily suspends monitoring and alert generation for the selected devices while allowing telemetry collection to continue. This ensures that maintenance operations, such as firmware upgrades, configuration changes, or physical mesh AP servicing, do not trigger false- positive alarms. Once the maintenance window concludes, alerts resume automatically, and the engineer can verify that all services are operational and that no critical issues were overlooked.
질문 # 39
......
IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. Cisco인증 350-101시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ExamPassdump에서 찾을볼수 있습니다. ExamPassdump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ExamPassdump에서 연구제작한 Cisco인증 350-101덤프로Cisco인증 350-101시험을 준비해보세요. 시험패스가 한결 편해집니다.
350-101최신 시험기출문제: https://www.exampassdump.com/350-101_valid-braindumps.html