P.S. Free 2026 Fortinet FCSS_SDW_AR-7.6 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=1RopH4GhkesEh6ikJ4FFjA8zCEfTx9obk
Do you want to obtain the FCSS_SDW_AR-7.6 exam bootcamp as soon as possible? If you do, you can choose us, since our FCSS_SDW_AR-7.6 exam dumps are famous for instant access to download, and you can receive the download link and password within ten minutes, so that you can begin your practice as early as possible. In addition, with skilled professionals to compile and verify, FCSS_SDW_AR-7.6 Exam Materials are high-quality, therefore they can help you pass the exam in your first attempt. In order to strengthen your confidence for the FCSS_SDW_AR-7.6 exam braindumps, we are pass guarantee and money back guarantee, if you fail to pass the exam, we will give you full refund.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Valid FCSS_SDW_AR-7.6 Exam Objectives <<
The number of questions of the FCSS_SDW_AR-7.6 study materials you have done has a great influence on your passing rate. As for our study materials, we have prepared abundant exercises for you to do. You can take part in the real FCSS_SDW_AR-7.6 exam after you have memorized all questions and answers accurately. Also, we just pick out the most important knowledge to learn. Through large numbers of practices, you will soon master the core knowledge of the FCSS_SDW_AR-7.6 Exam. It is important to review the questions you always choose mistakenly. You should concentrate on finishing all exercises once you are determined to pass the FCSS_SDW_AR-7.6 exam.
NEW QUESTION # 89
You have configured the performance SLA with the probe mode as Prefer Passive.
What are two observable impacts of this configuration? (Choose two.)
Answer: A,C
Explanation:
In FortiOS 7.6, when a Performance SLA probe mode is set to Prefer Passive, FortiGate attempts to measure link performance using passive monitoring first, based on real user traffic. Only when passive monitoring is not possible does FortiGate temporarily fall back to active probing.
With Prefer Passive, FortiGate passively monitors TCP traffic flowing through the SD-WAN member to calculate SLA metrics such as latency, jitter, and packet loss. This behavior directly matches option A.
During passive monitoring, FortiGate relies on observed traffic to infer link health. Because no synthetic probes are sent, a completely dead link (with no traffic passing) cannot be detected by the SLA during passive mode. As a result, dead members may not be immediately detected, which makes option D correct.
Option B is incorrect because there is no fixed 3-minute timer defined in FortiOS 7.6 that forces a return from active probing back to passive monitoring.
Option C is incorrect because passive SLA monitoring is based on TCP traffic, not ICMP traffic. ICMP is used for active probing, not passive monitoring.
Option E is incorrect because traffic subject to passive SLA monitoring cannot be offloaded to hardware. Passive SLA measurement requires software inspection of packets, which prevents NPU offloading.
Therefore, the two correct observable impacts of configuring the probe mode as Prefer Passive are A and D.
NEW QUESTION # 90
You are planning a large SD-WAN deployment with approximately 1000 spokes and want to allow ADVPN between the spokes. Some remote sites use FortiSASE to connect to the company's SD-WAN hub. Which overlay routing configuration should you use?
Answer: B
Explanation:
For a large-scale SD-WAN deployment (such as 1000 spokes) where ADVPN shortcut routing is required and some remote sites connect via FortiSASE, the recommended overlay routing configuration is BGP running on loopback interfaces, combined with dynamic BGP for ADVPN shortcut routing. This design leverages the scalability and resilience of BGP, allowing dynamic discovery and route exchange necessary for shortcut tunnels between spokes in ADVPN environments. Using loopback interfaces for BGP peering is considered best practice because it decouples routing protocol stability from physical link status, ensuring that if a physical underlay interface fails, the BGP session remains up as long as there's an alternate path. With dynamic BGP, each spoke can efficiently learn the routes to other spokes and dynamically establish shortcuts, which is critical at this scale. This method also integrates smoothly with FortiSASE for remote connectivity to the SD-WAN hub, providing flexibility and centralized management.
Reference:
[FCSS_SDW_AR-7.4 1-0.docx Q6]
Fortinet SD-WAN Reference Architecture Guide 7.4, "Scalable Routing with BGP on Loopback and ADVPN Shortcuts" Fortinet SD-WAN Concept Guide, "Overlay Routing Designs for Large Deployments"
NEW QUESTION # 91
Refer to the exhibits. The exhibits show an SD-WAN event log, the member status, and the SD- WAN rule configuration.
Which two conclusions can you draw from the information shown? (Choose two.)
Answer: A,B
Explanation:
The SD-WAN rule (config service edit 1) is configured with set mode priority. This means the rule selects the best interface based on a defined performance metric, as opposed to a simple static priority or SLA. The event log (image_41cfb5.png) shows Metric latency and Message Service prioritized by performance metric will be redirected in sequence order. This indicates that the rule is using latency to determine the preferred member. Given that the log message is about a change, and the most logical reason for a change in a priority mode is that a different member is now the best performer, it implies that the latency on port2 has become lower than that on port1.
The log message Service prioritized by performance metric will be redirected in sequence order confirms that FortiGate is changing the member being used for this service. Because the mode is priority, FortiGate dynamically selects the member that currently meets the best performance criteria, which in this case is latency. The log implies a new member has been selected as the most optimal, and with the default configuration, the members are sorted based on their performance, so the outgoing interface list is effectively updated to prefer the new best- performing member (port2).
NEW QUESTION # 92
Refer to the exhibits.
You use FortiManager to configure SD-WAN on three branch devices.
When you install the device settings. FortiManager prompts you with the error "Copy Failed" for the device branch1_fat When you click the log button. FortiManager displays the message shown in the exhibit.
Answer: C
NEW QUESTION # 93
Refer to the exhibit. The exhibit shows the details of a session and the index numbers of some relevant interfaces on a FortiGate device that supports hardware offloading.
Based on the information shown in the exhibits, which two conclusions can you draw? (Choose two.)
Answer: C,D
Explanation:
The session output shows reflect info: dev=7->6/6->7. From the netlink list, index 6 = port2 and 7
= port3, so the reply direction of the asymmetric (auxiliary) session is port2 โ port3.
The auxiliary session has npu info ... offload=8/8 (non-zero), indicating it can be offloaded to hardware.
NEW QUESTION # 94
......
With the rapid development of IT technology, the questions in the IT certification exam are also changing. Therefore, Pass4suresVCE also keeps updating test questions and answers. And if you purchase Pass4suresVCE Fortinet FCSS_SDW_AR-7.6 Practice Test materials, we will provide you with free updates for a year. As long as the questions updates, Pass4suresVCE will immediately send the latest questions and answers to you which guarantees that you can get the latest materials at any time. Pass4suresVCE can not only help you pass the test, but also help you learn the latest knowledge. Never pass up a good chance to have the substantial materials.
Exam FCSS_SDW_AR-7.6 Forum: https://www.pass4suresvce.com/FCSS_SDW_AR-7.6-pass4sure-vce-dumps.html
P.S. Free & New FCSS_SDW_AR-7.6 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=1RopH4GhkesEh6ikJ4FFjA8zCEfTx9obk