Will you feel nervous for the exam? If you do, we can relieve your nerves if you choose us. NSE6_FNC_AD-7.6 Soft test engine can stimulate the real exam environment, so that you can know procedures of the real exam environment, and it will build up your confidence. In addition, NSE6_FNC_AD-7.6 exam materials are verified by the experienced experts, and therefore the quality can be guaranteed. We offer you free demo to have a try before buying, so that you can have a better understanding of what you are going to buy. If you buy NSE6_FNC_AD-7.6 Exam Materials from us, we also pass guarantee and money back guarantee if you fail to pass the exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Visibility and Monitoring | 20% | - Guest and contractor management - Troubleshooting network and device status - Device profiling and classification - Logging and reporting |
| Topic 2: Concepts and Initial Configuration | 25% | - FortiNAC-F architecture and concepts - Model and organize infrastructure devices - Isolation networks and configuration wizard |
| Topic 3: Deployment and Provisioning | 30% | - Security policies and enforcement - Security automation configuration - Access control and logical networks - High Availability (HA) setup and monitoring |
| Topic 4: Integration | 25% | - FortiNAC-F Manager configuration - Syslog and SNMP trap integration - MDM and third-party device integration - Integration with FortiGate/FortiOS |
>> NSE6_FNC_AD-7.6 Latest Exam Question <<
Our NSE6_FNC_AD-7.6 Study Materials are recognized as the standard and authorized study materials and are widely commended at home and abroad. Our NSE6_FNC_AD-7.6 study materials boost superior advantages and the service of our products is perfect. We choose the most useful and typical questions and answers which contain the key points of the test and we try our best to use the least amount of questions and answers to showcase the most significant information.
NEW QUESTION # 41
What must an administrator configure to allow FortiNAC-F to process incoming syslog messages that are not supported by default?
Answer: C
Explanation:
FortiNAC-F provides a robust engine for processing security notifications from third-party devices. For standard integrations, such as FortiGate or Check Point, the system comes pre-loaded with templates to interpret incoming data. However, when an administrator needs FortiNAC-F to process syslog messages from a vendor or device that is not supported by default, they must configure aSecurity Event Parser.
TheSecurity Event Parseracts as the translation layer. It uses regular expressions (Regex) or specific field mappings to identify key data points within a raw syslog string, such as the source IP address, the threat type, and the severity. Without a parser, FortiNAC-F may receive the syslog message but will be unable to " understand " its contents, meaning it cannot generate the necessarySecurity Eventrequired to trigger automated responses. Once a parser is created, the system can extract the host ' s IP address from the message, resolve it to a MAC address via L3 polling, and then apply the appropriate security rules. This allows for the integration of any security appliance capable of sending RFC-compliant syslog messages.
" FortiNAC parses the information based onpre-defined security event parsersstored in FortiNAC ' s database... If the incoming message format is not recognized, a newSecurity Event Parsermust be created to define how the system should extract data fields from the raw syslog message. This enables FortiNAC to generate a security event and take action based on the alarm configuration. " -FortiNAC-F Administration Guide: Security Event Parsers.
NEW QUESTION # 42
An administrator wants to use FortiNAC-F to prevent internal engineers from accessing specific websites as defined in web filter categories on FortiGate.
In addition to a security trigger and associated action, which configuration must also be defined on FortiNAC-F?
Answer: C
Explanation:
To enforce restrictions based on web filter categories for internal engineers, FortiNAC-F must identify and group those users or their devices. A user/host profile defines the specific users or hosts (such as internal engineers) to which the security trigger and associated action will apply, enabling targeted enforcement.
NEW QUESTION # 43
A network administrator is troubleshooting a network access issue for a specific host. The administrator suspects the host is being assigned a different network access policy than expected.
Where would the administrator look to identify which network access policy, if any, is being applied to a particular host?
Answer: B
Explanation:
When troubleshooting network access in FortiNAC-F, it is often necessary to verify exactly why a host has been granted a specific level of access. Since FortiNAC-F evaluates policies from the top down and assigns access based on the first match, an administrator needs a clear way to see the results of this evaluation for a specific live endpoint.
ThePolicy Details (C)view is the designated tool for this purpose. By navigating to theHosts > Hosts(or Adapter View) in the Administration UI, an administrator can search for the specific MAC address or IP of the host in question. Right-clicking on the host record reveals a context menu from whichPolicy Detailscan be selected. This view provides a real-time " look " into the policy engine ' s decision for that specific host, showing theNetwork Access Policythat was matched, theUser/Host Profilethat triggered the match, and the resultingNetwork Access Configuration(VLAN/ACL) currently applied.
WhilePolicy Logs (A)provide a historical record of all policy transitions across the system, they are often too high-volume to efficiently find a single host ' s current state. TheConnections view (B)shows the physical port and basic status but lacks the granular policy logic breakdown. ThePort Properties (D)view shows the configuration of the switch interface itself, which is only one component of the final access determination.
" To identify which policy is currently applied to a specific endpoint, use thePolicy Detailsview. Navigate toHosts > Hosts, select the host, right-click and choosePolicy Details. This window displays the specificNetwork Access Policy, User/Host Profile, and Network Access Configuration currently in effect for that host record. " -FortiNAC-F Administration Guide: Policy Details and Troubleshooting.
NEW QUESTION # 44
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?
Answer: C
Explanation:
In FortiNAC-F, the Inventory topology uses specific icons to represent the status and model of discovered network infrastructure. When a switch or other network device is discovered via SNMP, FortiNAC-F retrieves its System ObjectID (sysObjectID) to identify the specific make and model. This OID is then compared against the internal database of supported device mappings.
A question mark (?) icon appearing on a discovered switch indicates that while the discovery process successfully communicated with the device (meaning SNMP credentials were correct), the SNMP ObjectID is not recognized or mapped in the current version of FortiNAC-F. This essentially means the device is "unsupported" by the current software out-of-the-box. Because the OID is unknown, FortiNAC-F does not know which CLI or SNMP command set to use for critical functions like L2 polling (host visibility) or VLAN switching (enforcement). To resolve this, an administrator can manually "Set Device Mapping" to a similar existing model or a "Generic SNMP Device" if only basic L3 visibility is required.
"Discovered devices displaying a '?' icon indicate the currently running version does not have a mapping for that device's System OID (device is not supported). Device mappings are used to manage the device by performing functions such as L2/L3 Polling, Reading, and Switching VLANs."
NEW QUESTION # 45
As part of a company policy, all end stations must be scanned for compliance each day. The security administrators want to satisfy this requirement without any necessary interaction from the end user. Which two agents can provide that functionality? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and C . The persistent agent is the strongest fit because it is installed and stays resident on the endpoint. The study guide states that after deployment, the persistent agent communicates back to FortiNAC-F every 15 minutes and performs scheduled scans in the background, transparent to the end user. That directly satisfies the requirement for recurring compliance scans without user involvement.
The passive agent can also scan Windows domain end stations without end-user interaction. The guide states that the passive agent is deployed through login/logoff scripts and administrative templates, and that passive agent registration can register and scan hosts associated with LDAP or Active Directory users. If enabled, the passive agent scans the host to verify compliance with the appropriate endpoint policy.
Option A is wrong because the dissolvable agent is a run-once agent that requires manual end-user interaction in the captive portal, then removes itself after reporting results. Option D is not the best answer for this requirement because the mobile agent is specifically for Android onboarding and is manually installed; it is not the general solution for daily compliance scanning of all end stations.
NEW QUESTION # 46
......
Belive it or not, our efficient and authoritative NSE6_FNC_AD-7.6 exam materials are always here waiting for you to provide you with the best help of NSE6_FNC_AD-7.6 exam preparation. Maybe you just need a NSE6_FNC_AD-7.6 exam certification to realize your dream of promotion. We know that impulse spending will make you regret, so we suggest that you first download our free demo to check before purchasing. You can easily download our free demo of NSE6_FNC_AD-7.6 Exam; come on and try it.
NSE6_FNC_AD-7.6 Test Pdf: https://www.vce4plus.com/Fortinet/NSE6_FNC_AD-7.6-valid-vce-dumps.html