DOWNLOAD the newest TroytecDumps SD-WAN-Engineer PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=141zhPjiARUZ2TeWWBysGGRYKVS6eimp7
As we all know, for candidates all they do is to pass the exam. If you choose us, we will help you pass the exam successfully. With the pass rate is 98.65% for SD-WAN-Engineer study materials, we can ensure you pass the exam, and we also pass guarantee and money back guarantee if you fail to pass the exam. Besides, we have the skilled professionals to compile and verify the SD-WAN-Engineer Exam Braindumps, they have covered most knowledge points of the exam. SD-WAN-Engineer study materials contain both questions and answers, and you can have a quickly check after practicing.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Deployment and Configuration | 38% | - Prisma SD-WAN Deployment
|
| Topic 2: Operations and Monitoring | 38% | - Monitoring and Troubleshooting
|
| Topic 3: Planning and Design | 24% | - Network Assessment and Requirements
|
>> SD-WAN-Engineer Training Kit <<
As an enthusiasts in IT industry, are you preparing for the important SD-WAN-Engineer exam? Why not let our TroytecDumps to help you? We provide not only the guarantee for you to Pass SD-WAN-Engineer Exam, but also the relaxing procedure of SD-WAN-Engineer exam preparation and the better after-sale service.
NEW QUESTION # 73
In a Data Center deployment, what is the key functional difference between configuring a BGP neighbor as a "Core Peer" versus an "Edge Peer"?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
In the Prisma SD-WAN Data Center (DC) model, the terminology for BGP peers defines their role in the topology and how the system generates route maps.
Core Peer: This peer type is designated for the LAN-side connection (facing the DC Core Switch or internal Routers). Its primary purpose is to learn the subnets/prefixes hosted in the data center so the ION can advertise them to the remote branches. The system automatically creates route maps to facilitate this redistribution into the fabric.
Edge Peer: This peer type is designated for the WAN-side connection (facing the Edge Router or MPLS PE). Its primary purpose is to provide reachability to the underlay network.
Distinction: Selecting the correct type affects the default Route Maps and Prefix Lists generated by the controller. Configuring a Core Peer correctly ensures that the DC's internal subnets are properly learned and propagated to the overlay, whereas an Edge Peer configuration focuses on WAN next-hop reachability.
NEW QUESTION # 74
An engineer at a managed services provider is updating an application that allows its customers to request firewall changes to also manage SD-WAN. The application will be able to make any approved changes directly to devices via API.
What is a requirement for the application to create SD-WAN interfaces?
Answer: B
Explanation:
In Palo Alto Networks PAN-OS SD-WAN environments, automation and orchestration are key components for service providers managing large-scale deployments. The PAN-OS REST API provides a modern, structured way to programmatically manage configuration objects, including those required for SD-WAN functionality.
When an application is designed to push changes directly to devices (individual firewalls) rather than through a centralized template in Panorama, it must interact with the firewall's local REST API. To successfully create a virtual SD-WAN interface, the application must target the correct resource URI. In the PAN-OS API schema, the logical SD-WAN interface-which groups physical links to enable application-based path selection-is managed via the sdwanInterfaces parameter within the REST API.
It is important to distinguish between the interface itself and the profiles that support it. Option A refers to sdwanInterfaceprofiles, which are the objects used to define the characteristics of a link (such as bandwidth, link type, and monitoring frequency), but not the interface itself. Furthermore, since the scenario specifies making changes "directly to devices," the target must be the firewall rather than Panorama. While Panorama can manage these objects via templates, a direct-to-device automation workflow necessitates using the firewall's REST API endpoint. Utilizing the REST API over the legacy XML API is the recommended standard for modern integrations due to its ease of use with JSON payloads and alignment with contemporary DevSecOps practices. By using the sdwanInterfaces parameter on the firewall, the MSP application can programmatically bind physical Layer 3 interfaces to the SD-WAN fabric.
NEW QUESTION # 75
A network engineer is troubleshooting an ION device that is showing as "Offline" in the Prisma SD-WAN portal, despite the site reporting that local internet access is working. The engineer has console access to the device.
Which CLI command should be used to specifically validate the device's ability to resolve the controller's hostname and establish a secure connection to it over a specific interface?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
The CLI command debug controller reachability <interface> (e.g., debug controller reachability 1) is the specific diagnostic tool designed to verify the entire connectivity chain required for management plane availability.
Unlike a simple ICMP ping (Option A), which only tests Layer 3 connectivity to an IP address, the debug controller reachability command performs a sequential set of tests:
DNS Resolution: It attempts to resolve the specific Locator service URL (locator.cgnx.net or region-specific FQDN) to verify DNS functionality.
TCP Connectivity: It tests the ability to establish a TCP connection to the controller on port 443 (HTTPS).
SSL/TLS Handshake: It validates that the device can successfully negotiate the secure tunnel required for authentication.
If this command fails at the DNS step, the issue is likely a missing DNS server in the interface config. If it fails at the TCP step, it implies an upstream firewall is blocking outbound port 443. This targeted output allows the engineer to pinpoint exactly why the device is offline in the portal.
NEW QUESTION # 76
What is the purpose of Secure Group Tag (SGT) propagation in Prisma SD-WAN?
Answer: A
Explanation:
In modern enterprise environments, maintaining a consistent security posture across disparate network domains is a major challenge. Prisma SD-WAN addresses this by supporting Secure Group Tag (SGT) propagation. SGTs are a key component of Cisco's TrustSec architecture, used to classify traffic based on the identity of the source (users, devices, or groups) rather than just IP addresses. By supporting SGT propagation, Prisma SD-WAN allows organizations to integrate with external identity-based security solutions seamlessly.
When traffic enters an ION device from a LAN segment where SGTs are already applied (typically by an access layer switch or an Identity Services Engine), the ION device can be configured to preserve or
"propagate" these tags as the traffic traverses the SD-WAN fabric.6 This ensures that the identity context remains intact even after the traffic has crossed the WAN.7 When the traffic reaches its destination-whether that is a data center, another branch, or a security gateway-the receiving device can use the SGT to enforce granular security policies.
This integration is vital for organizations moving toward a Zero Trust architecture. Instead of rewriting complex firewall rules at every hop, the SGT acts as a portable identity badge. Prisma SD-WAN's ability to handle these tags allows it to participate in a larger security ecosystem, ensuring that a "Finance" user is treated with the same security restrictions at a remote branch as they would be at the corporate headquarters.
This eliminates the need for manual IP-to-Group mapping across the WAN, reducing administrative overhead and minimizing the risk of security gaps during lateral movement of traffic.
NEW QUESTION # 77
An administrator has configured a Path Policy for "ERP_Traffic". The policy allows two public internet links,
"ISP-A" and "ISP-B", both marked as "Active". The Path Quality Profile (SLA) requires a latency of less than
150ms. Currently, both ISP-A and ISP-B have a latency of 40ms, well within the SLA.
How does the Prisma SD-WAN ION determine which link to use for a new flow of "ERP_Traffic" when both active paths meet the SLA requirements?
Answer: B
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN utilizes a sophisticated decision engine for Application-Based Path Selection that goes beyond simple failover. When configuring a Path Policy, the administrator defines "Active" paths and a "Path Quality Profile" (SLA).
* SLA Compliance (The Filter): First, the system filters the available paths based on the Path Quality Profile. In this scenario, both ISP-A and ISP-B have 40ms latency against a 150ms threshold. Both are
"green" or compliant paths.
* Selection Criteria (The Tie-Breaker): When multiple paths are configured as "Active" and all meet the performance SLA, the ION device aims to optimize the overall user experience and network utilization. The default behavior for load balancing across healthy, compliant active paths is to select the path with the highest available bandwidth capacity.
By steering new flows to the link with the most "headroom" (available Mbps), the system prevents the saturation of a smaller link (e.g., a 20Mbps DSL line) while a larger link (e.g., 1Gbps Fiber) sits underutilized.
This maximizes the aggregate throughput for the site. While latency is the qualifier, bandwidth availability is often the selector for compliant paths. Note that if the application was defined as "Real-Time" and configured for packet duplication, behavior would differ, but for standard traffic, capacity-based distribution is the standard active/active logic.
NEW QUESTION # 78
......
Get the Most Recent Palo Alto Networks SD-WAN-Engineer Exam Questions for Guaranteed Success: It would be really helpful to purchase Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam dumps right away. If you buy this Palo Alto Networks Certification Exams product right now, we'll provide you with up to 365 days of free updates for Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) authentic questions. You can prepare using these no-cost updates in accordance with the most recent test content changes provided by the Palo Alto Networks SD-WAN-Engineer exam dumps.
Reliable SD-WAN-Engineer Exam Book: https://www.troytecdumps.com/SD-WAN-Engineer-troytec-exam-dumps.html
P.S. Free & New SD-WAN-Engineer dumps are available on Google Drive shared by TroytecDumps: https://drive.google.com/open?id=141zhPjiARUZ2TeWWBysGGRYKVS6eimp7