Maybe you will find that the number of its NSE6_FNC_AD-7.6 test questions is several times of the traditional problem set, which basically covers all the knowledge points to be mastered in the exam or maybe you will find the number is the same with the real exam questions. You only need to review according to the content of our NSE6_FNC_AD-7.6 practice quiz, no need to refer to other materials. With the help of our NSE6_FNC_AD-7.6 study materials, your preparation process will be relaxed and pleasant.
| Section | Objectives |
|---|---|
| Topic 1: Network Visibility and Monitoring | - Troubleshoot network devices and device status - Use logging options available on FortiNAC - Guests and contractors - Explain and configure device profiling |
| Topic 2: Concepts and Initial Configuration | - Model and organize infrastructure devices - Explain isolation networks and the configuration wizard |
| Topic 3: Integration | - Configure and use FortiNAC-F Manager - Integrate with third-party devices using Syslog and SNMP trap input - Explain and configure MDM integration |
| Topic 4: Deployment and Provisioning | - Configure security automation - Configure FortiNAC-F security policies - Configure and monitor high availability (HA) - Configure access control on FortiNAC-F |
>> Exam NSE6_FNC_AD-7.6 Collection Pdf <<
About some esoteric points, they illustrate with examples for you. Our NSE6_FNC_AD-7.6 practice materials are the accumulation of professional knowledge worthy practicing and remembering, so you will not regret choosing our NSE6_FNC_AD-7.6 practice materials. The best way to gain success is not cramming, but to master the discipline and regular exam points of question behind the tens of millions of questions. Our NSE6_FNC_AD-7.6 practice materials can remove all your doubts about the exam. If you believe in our products this time, you will enjoy the happiness of success all your life.
NEW QUESTION # 54 
An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn ' t working.
What is the problem with the configuration?
Answer: A
Explanation:
In a FortiNAC-F deployment, the configuration of theDHCP scopefor isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between theDHCP configurationand theNetwork Topology.
As shown in the " Network Topology " exhibit, theRegistration Networkresides on a router interface (or sub- interface) with the IP address192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the " DHCP configuration " exhibit shows the scope " REG-ScopeOne
" configured with aGateway of 10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading theCaptive Portalor communicating with the FortiNAC server.
According to theFortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the " Gateway " field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router ' s DHCP Relay (IP Helper) and DNS redirection.
" When configuring scopes for a Layer 3 network, theGatewayvalue must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic. If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN. " -FortiNAC-F Configuration Wizard Reference Manual: DHCP Scopes.
NEW QUESTION # 55
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
Answer: B,C
Explanation:
The N+1 High Availability (HA) architecture was introduced in FortiNAC-F version 7.6 to provide a more scalable and flexible redundancy model compared to the traditional 1+1 active/passive setup.
In an N+1 configuration, a single secondary (standby) appliance can provide coverage for multiple primary (active) Control and Application (CA) appliances.
To set up an N+1 HA cluster, there are two fundamental structural requirements:
A FortiNAC-F Manager (FortiNAC-M): Unlike standard 1+1 HA, which can be configured directly between two CAs, N+1 management is centralized. The FortiNAC-M acts as the orchestrator that manages the failover groups, monitors the health of the primaries, and coordinates the promotion of the secondary server if a primary fails.
A FortiNAC-F device designated as a Secondary: The cluster must have one appliance explicitly configured with the Secondary failover role. This device remains in a standby state, receiving database replications from all N primaries in its group until it is called upon to take over the functions of a failed unit
NEW QUESTION # 56
A network administrator is troubleshooting a network access issue for a specific host. The administrator suspects the host is being assigned a different network access policy than expected.
Where would the administrator look to identify which network access policy, if any, is being applied to a particular host?
Answer: C
Explanation:
When troubleshooting network access in FortiNAC-F, it is often necessary to verify exactly why a host has been granted a specific level of access. Since FortiNAC-F evaluates policies from the top down and assigns access based on the first match, an administrator needs a clear way to see the results of this evaluation for a specific live endpoint.
The Policy Details (C) view is the designated tool for this purpose. By navigating to the Hosts > Hosts (or Adapter View) in the Administration UI, an administrator can search for the specific MAC address or IP of the host in question. Right-clicking on the host record reveals a context menu from which Policy Details can be selected. This view provides a real-time "look" into the policy engine's decision for that specific host, showing the Network Access Policy that was matched, the User/Host Profile that triggered the match, and the resulting Network Access Configuration (VLAN/ACL) currently applied.
NEW QUESTION # 57
Two FortiNAC-F devices have been configured as a 1 + 1 HA pair. The primary server went offline and a successful failover to the secondary has occurred. What happens if the primary server comes back online?
Answer: B
NEW QUESTION # 58
An administrator wants to use FortiNAC-F to collect an application inventory for hosts. Which two options would satisfy this requirement?
(Choose two.)
Answer: A,D
NEW QUESTION # 59
......
Dumpcollection offers actual and updated NSE6_FNC_AD-7.6 Dumps after seeing the students struggling to prepare quickly for the test. We have made this product after consulting with a lot of professionals so the students can be successful. Dumpcollection has hired a team of professionals who work on a daily basis without caring about themselves to update the Fortinet NSE6_FNC_AD-7.6 practice material.
Study NSE6_FNC_AD-7.6 Group: https://www.dumpcollection.com/NSE6_FNC_AD-7.6_braindumps.html