BTW, DOWNLOAD part of BraindumpsIT NSE5_FNC_AD_7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1zGXrKkd6cuH9Gw2N4i37T3Lr3bB_Kb5K
As what have been demonstrated in the records concerning the pass rate of our NSE5_FNC_AD_7.6 free demo, our pass rate has kept the historical record of 98% to 99% from the very beginning of their foundation. Although at this moment, the pass rate of our NSE5_FNC_AD_7.6 test torrent can be said to be the best compared with that of other exam tests, our experts all are never satisfied with the current results because they know the truth that only through steady progress can our NSE5_FNC_AD_7.6 Preparation materials win a place in the field of NSE5_FNC_AD_7.6 exam question making forever.
| Section | Objectives |
|---|---|
| Integration | - Connecting FortiNAC-F with other systems
|
| Deployment and Provisioning | - Security automation for automatic event responses
|
| Concepts and Initial Configuration | - Organizing infrastructure devices within FortiNAC-F
|
| Network Visibility and Monitoring | - Guest and contractor access management
|
>> NSE5_FNC_AD_7.6 Valid Test Discount <<
No matter what kind of NSE5_FNC_AD_7.6 learning materials you need, you can find the best one for you. Our expert team has spent a lot of time and energy just to provide you with the best quality NSE5_FNC_AD_7.6study guide. NSE5_FNC_AD_7.6 Exam Materials will definitely make you feel value for money. Your exam results will help you prove this! And countless of the candidates have been benefited from our NSE5_FNC_AD_7.6 practice braindumps.
NEW QUESTION # 59
Refer to the exhibit.
Which devices are automatically evaluated by these device profiling rules?
Answer: A
Explanation:
The correct answer is A . In FortiNAC-F, device profiling rules are used primarily to classify unknown or untrusted devices when they are first discovered. The study guide explains that when a device does not already exist in the database, FortiNAC-F adds it, treats it as a rogue, and evaluates it against enabled device profiling rules. It also states that devices are initially evaluated against device profiling rules only if they do not already exist in the database, because this avoids unnecessary repeated evaluation of known devices.
The exhibit also matters: the rules are enabled and set to Automatic registration, but Confirm Rule On Connect is not enabled and Confirm Rule Interval is set to None . That means FortiNAC-F will not automatically revalidate already-profiled or trusted devices every time they connect. Option B is wrong because trusted devices are not repeatedly evaluated unless rule confirmation is configured. Option C is too broad because all hosts are not processed through profiling rules on every connection. Option D is also wrong because changing location does not by itself force automatic device profiling; location can be used as a rule method, but the automatic evaluation described here applies when the rogue device is initially added to the database.
NEW QUESTION # 60
Refer to the exhibit.
An administrator is configuring FortiNAC-F (or the onboarding of guest users. Which IP address would be used for the gateway defined in the DHCP scope?
Answer: B
Explanation:
The correct answer is D . The question is about guest onboarding , and the exhibit shows the Guest Network using gateway 10.20.1.250 . In a Layer 3 captive network design, FortiNAC-F provides DHCP and DNS services to isolated or captive-network hosts, but the DHCP scope must still give the endpoint the correct default gateway for the network where that endpoint is placed. The study guide specifically warns that, when configuring Layer 3 captive network scopes, the administrator must think from the isolated host's perspective for the IP pool and gateway configuration . It also states that each captive network interface configuration includes an IP address, subnet mask, default gateway, and one or more DHCP scopes.
Option A , 10.0.1.254 , is the infrastructure gateway on the FortiNAC-F service/production-side segment, not the guest network gateway. Option B , 10.0.1.110 , is the FortiNAC-F interface address shown in the diagram, not the default gateway for guest clients. Option C , 10.10.1.250 , is the gateway for the Isolation Network , not the Guest Network . Since the administrator is configuring guest onboarding, the DHCP scope for guest users must hand out 10.20.1.250 as the gateway.
NEW QUESTION # 61
Refer to the exhibits.
An administrator is troubleshooting visibility issues on a modeled switch The switch is configured to use link traps and to provision hosts based on network access policies. The administrator is seeing hosts on ports with no hosts connected and not seeing hosts on ports where hosts are known to be connected.
What is the most likely cause?
Answer: D
Explanation:
The correct answer is C . In a link-trap-based wired deployment, the switch sends a linkUp or linkDown SNMP trap to FortiNAC-F, but that trap does not contain the endpoint MAC address. After receiving the link trap, FortiNAC-F must contact the switch and perform a Layer 2 poll to read the forwarding table and determine which MAC address was added or removed on the port. The FortiNAC-F study guide states that link traps trigger FortiNAC-F to perform a Layer 2 poll to update its awareness of devices connected to the edge device, and the wired link-trap workflow specifically shows FortiNAC-F performing a Layer 2 poll before locating the host record and provisioning access.
The symptoms in the exhibit are classic stale Layer 2 visibility: FortiNAC-F still shows a rogue host on a port where no host is connected, while also failing to show hosts on ports where endpoints are actually connected.
That means FortiNAC-F is not successfully refreshing the switch MAC table information. Since link traps depend on FortiNAC-F being able to poll the switch after the trap, a contact failure with the modeled switch is the most likely cause.
Option A is wrong because logical network settings affect access enforcement, not whether FortiNAC-F can see current MAC-to-port mappings. Option B is wrong because the FortiNAC-F agent is not required for basic switch-port visibility; Layer 2 visibility comes from switch polling, MAC notification traps, or RADIUS. Option D is tempting, but the broader failure shown here is not merely a policy or endpoint-side issue-it is that FortiNAC-F cannot obtain current Layer 2 data from the switch. In practice, you would still verify SNMP/CLI credentials while troubleshooting, but the best answer to the symptom pattern is that FortiNAC-F cannot contact/query the switch successfully.
NEW QUESTION # 62
When configuring FortiNAC-F to manage FortiGate VPN users, an endpoint compliance policy must be created for the integration.
Why is the endpoint compliance policy necessary for this type of integration?
Answer: A
Explanation:
The integration of FortiNAC-F with FortiGate VPN requires a specific policy workflow to bridge the gap between initial user authentication and full network access. When a user connects to the VPN, the FortiGate typically provides the User ID and IP address, but FortiNAC-F requires a MAC address to uniquely identify and manage the endpoint's record.
According to the FortiGate VPN Integration Guide, the Endpoint Compliance Policy is a mandatory component of this setup because it is used to designate the required agent type. Because a VPN connection is Layer 3, FortiNAC cannot "see" the MAC address through traditional SNMP or L2 polling. The compliance policy instructs the system to present a Captive Portal to the remote user, requiring them to download and run either the Persistent or Dissolvable Agent. The agent then reports the device's MAC address back to FortiNAC, allowing the system to correlate the VPN session with a host record.
Once the agent is running and the MAC is known, FortiNAC-F can evaluate the device's security posture (if scanning is configured) and send the necessary FSSO tags back to the FortiGate to lift the initial network restrictions. Without the compliance policy to enforce the agent requirement, the connection would remain in an isolated "IP-only" state with no unique hardware identity.
"The Endpoint Compliance Policy is necessary to control the agent requirement for VPN users. Create a default VPN Endpoint Compliance Policy to distribute an agent via captive portal for isolated machines. This policy allows the administrator to designate the required agent type (Persistent or Dissolvable) that will be used to collect the hardware (MAC) address and perform health scans on the remote endpoint." - FortiNAC FortiGate VPN Integration Guide: Default Endpoint Compliance Policy (Optional) Section.
NEW QUESTION # 63
Which two statements are true about integrating a third-party device using SNMP traps from that device as input to generate an event? (Choose two.)
Answer: A,C
NEW QUESTION # 64
......
Every one, please pay attention to BraindumpsIT platform. Fortinet NSE5_FNC_AD_7.6 exam training is completely designed for the NSE5_FNC_AD_7.6 examination with the high-quality and best accuracy. The questions of the NSE5_FNC_AD_7.6 almost mirror the actual test and cover all most the main contents. Besides, the cost of the NSE5_FNC_AD_7.6 Exam PDF is reasonable and affordable. With the help of the Fortinet NSE5_FNC_AD_7.6 study material, your study will be efficiency. 100% pass is a little case for you.
Actual NSE5_FNC_AD_7.6 Test Pdf: https://www.braindumpsit.com/NSE5_FNC_AD_7.6_real-exam.html
BTW, DOWNLOAD part of BraindumpsIT NSE5_FNC_AD_7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1zGXrKkd6cuH9Gw2N4i37T3Lr3bB_Kb5K