你在煩惱什麼呢？是因為International Code Council的93-Tall-Mass-Timber-Buildings認證考試而煩惱嗎？確實，93-Tall-Mass-Timber-Buildings考試是一門很難通過的考試。但是你也不用過分擔心。只要你利用了適當的方法，輕鬆地通過考試也不是不可能的。那麼你知道什麼是適當的方法嗎？使用Fast2test的93-Tall-Mass-Timber-Buildings資料就是一種最好不過的方法。Fast2test一直以來幫助了很多參加IT認定考試的考生，並且得到了大家的一致好評。這個資料可以保證你一次通過考試，請放心使用。
| Section | Objectives |
|---|---|
| Topic 1: Tall Mass Timber Building Code Provisions | - Special Inspection Requirements
- Fire Safety and Fire Resistance
|
>> 93-Tall-Mass-Timber-Buildings測試 <<
作為IT認證考試學習資料的專業團隊，Fast2test是您獲得高品質學習資料的來源。無論您需要尋找什么樣子的International Code Council 93-Tall-Mass-Timber-Buildings考古題我們都可以提供，借助我們的93-Tall-Mass-Timber-Buildings學習資料，您不必浪費時間去閱讀更多的參考書，只需花費20 – 30小時掌握我們的International Code Council 93-Tall-Mass-Timber-Buildings題庫問題和答案，就可以順利通過考試。我們為您提供PDF版本的和軟件版，還有在線測試引擎題庫，其中93-Tall-Mass-Timber-Buildings軟件版本的題庫，可以模擬真實的考試環境，以滿足大家的需求，這是最優秀的93-Tall-Mass-Timber-Buildings學習資料。
問題 #71
The building owner shall be responsible for each of the following for fire safety during construction except:
答案：C
解題說明：
Option C is not an IFC requirement. The 2021 IFC requires inspection records to be maintained on-site, but it does not require those records to be secured in a fire- and water-resistant safe.
Section 3303.2 requires the owner to designate a site safety director. Section 3303.3 then makes that director responsible for completing a daily fire safety inspection of the project site. Every day, building and outdoor construction areas must be evaluated against the prescribed fire-safety inspection items.
The results of each inspection must be documented and retained on-site until a certificate of occupancy has been issued . The records must also be immediately available at the site for presentation to the fire code official upon request. Options A, B, and D therefore accurately reflect the code requirements.
The daily inspection program covers practical hazards such as hot work, temporary heating, combustible debris, temporary electrical wiring, hazardous-material storage, fire apparatus access, hydrants, fire department connections, standpipe availability, and portable extinguishers.
For tall mass timber projects, this documentation is particularly important because substantial combustible construction may be present before permanent fire protection systems are complete.
References/Topics: 2021 IFC Sections 3303.2 and 3303.3; site safety director; daily fire-safety inspection and documentation.
問題 #72
What fire-resistance rating is required for Type IV-C exterior and interior bearing walls?
答案：A
解題說明：
IBC Table 601 requires both exterior and interior bearing walls in Type IV-C construction to have a minimum two-hour fire-resistance rating. Option B is correct.
For exterior bearing walls, the Table 601 rating is not the only applicable criterion. Section 602.1 also requires exterior walls to satisfy Table 705.5 based on occupancy and fire separation distance. Where Table 705.5 or another provision imposes a more restrictive rating, the higher requirement governs.
The two-hour rating may be achieved through the calculated structural fire resistance of the mass timber, approved noncombustible protection, or an approved combination of the two. Connections, intersections, penetrations, and abutting edges must not create a premature failure path or compromise the rated assembly.
A one-hour reduction can be permitted for bearing walls supporting a roof only under Table 601, Footnote
"a," but that exception does not apply to a wall carrying floors or other qualifying structural loads. The inspector must confirm the actual load path before accepting any reduced protection at the uppermost level.
References/Topics: 2021 IBC Sections 601, 602.1 and 602.4; Tables 601 and 705.5; Type IV-C bearing walls.
問題 #73
Based on the definition of cross-laminated timber (CLT), panels are manufactured as follows:
答案：B
解題說明：
The 2021 IBC definition of cross-laminated timber describes a prefabricated engineered wood product consisting of not less than three layers of solid-sawn lumber or structural composite lumber. The adjacent layers are cross oriented and bonded with structural adhesive to form a solid wood element. Accordingly, option C is correct.
Cross orientation means that the principal grain direction of one layer is arranged approximately perpendicular to that of the adjoining layer. This configuration distinguishes CLT from products in which all laminations run parallel, such as conventional glued-laminated timber. The cross-oriented layup provides two- way panel behavior, dimensional stability, and structural capacity in both principal directions.
Option A is incorrect because CLT must contain at least three layers. Option B describes a mechanically laminated product rather than structural glued CLT; nail-laminated timber uses mechanical fasteners, whereas code-compliant CLT uses structural adhesives and must conform to the applicable manufacturing standard.
Option D eliminates the defining cross-lamination characteristic and would instead describe a parallel- laminated product.
During inspection, the product label and certification documentation should be checked to confirm the panel was manufactured under the required quality-assurance program.
References/Topics: 2021 IBC Chapter 2 definition of "Cross-Laminated Timber"; Sections 602.4 and
2303.1.4; ANSI/APA PRG 320.
問題 #74
Refer to the figure by clicking on the EXHIBIT button above.
In Type IV-B construction, unprotected portions of mass timber as shown in the Figure are required to be separated by _____ feet.
答案：C
解題說明：
The required separation is 15 feet , making option B correct. Section 602.4.2.2.4 of the 2021 IBC specifically regulates the separation distance between unprotected mass timber elements in Type IV-B construction.
Within each dwelling unit or fire area, unprotected portions of mass timber walls and ceilings must be separated from other unprotected wall and ceiling portions by not less than 15 feet . For ceiling-related surfaces, the separation is measured horizontally along the ceiling. For wall-to-wall exposure, the applicable separation is measured horizontally along the floor.
This requirement operates in addition to the maximum exposed-area restrictions. A designer therefore cannot merely demonstrate that the exposed ceiling is below 20 percent or that exposed walls are below 40 percent of floor area; the exposed regions must also satisfy the required spatial separation.
The purpose is to prevent multiple exposed mass timber regions from acting as closely spaced fuel packages during a compartment fire. During inspection, dimensions should be checked against the approved documents before required gypsum or other noncombustible protection is completed.
References/Topics: 2021 IBC Section 602.4.2.2.4; separation distance between unprotected Type IV-B mass timber elements.
問題 #75
Which of the following provisions for mass timber used for interior exit and elevator hoistway enclosures is true?
答案：C
解題說明：
Option A correctly applies the protection requirements for mass timber used in qualifying interior exit and elevator hoistway enclosures. Where a two-hour, or 120-minute, fire-resistance rating is required, the noncombustible protection must contribute not less than two-thirds of that required rating. Two-thirds of 120 minutes is 80 minutes.
The 2021 IBC provisions for Type IV-A require interior mass timber surfaces to be protected with compliant noncombustible materials. The assigned protection time is determined under Section 722.7 and cannot be less than the applicable minimum. Option B is incorrect because 40 minutes would provide only one-third of a two-hour rating; Type IV-B protected mass timber generally requires at least 80 minutes for a two-hour element. Option C does not correctly describe the special protection path applicable to mass timber exit and hoistway enclosures. Option D is also incorrect because Type IV-HT is not governed by the tall mass timber enclosure provision stated in the question.
The inspector must verify the total assigned protection time, membrane type, number of layers, fastening, joints, corners, penetrations, and continuity on both required faces of the enclosure.
References/Topics: 2021 IBC Sections 602.4, 602.4.1.2 and 722.7.1; protection of mass timber shaft and exit enclosures.
問題 #76
......
對于93-Tall-Mass-Timber-Buildings認證是評估職員在公司所具備的能力和知識，而如何獲得International Code Council 93-Tall-Mass-Timber-Buildings認證是大多數考生面臨的挑戰性的問題。現在的考試如93-Tall-Mass-Timber-Buildings在經常的跟新，準備通過這個考試是一項艱巨的任務，International Code Council 93-Tall-Mass-Timber-Buildings考古題是一個能使您一次性通過該考試的題庫資料。一旦您通過考試，您將獲得不錯的工作機會，所以，選擇93-Tall-Mass-Timber-Buildings題庫就是選擇成功，我們將保證您百分之百通過考試。
93-Tall-Mass-Timber-Buildings證照資訊: https://tw.fast2test.com/93-Tall-Mass-Timber-Buildings-premium-file.html