BONUS!!! Download part of Lead2Passed H12-831_V1.0-ENU dumps for free: https://drive.google.com/open?id=1BvXTWEWoTbdtPGKbnEc8luajOwgQP22M
Our H12-831_V1.0-ENU preparation torrent can keep pace with the digitized world by providing timely application. There are versions of Software and APP online, they can simulate the real exam environment. If you take good advantage of this H12-831_V1.0-ENU practice materials character, you will not feel nervous when you deal with the H12-831_V1.0-ENU Real Exam. Furthermore, they can be downloaded to all electronic devices so that you can have a rather modern study experience conveniently. Why not have a try on our H12-831_V1.0-ENU exam questions?
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Advanced IGP Features | 17% | - OSPF advanced features
|
| Topic 2: MPLS Technologies | 19% | - MPLS fundamentals and label distribution - MPLS OAM and protection - LDP and RSVP-TE protocols - MPLS VPN (L3VPN, L2VPN) |
| Topic 3: IPv6 Routing | 20% | - BGP4+ for IPv6 - IPv6 address planning and configuration - OSPFv3 and IS-IS for IPv6 - Transition mechanisms (dual-stack, tunnel, translation) |
| Topic 4: Network Cutover | 7% | - Cutover planning and risk assessment - Post-cutover validation - Implementation and rollback strategy - Pre-cutover verification |
| Topic 5: Network O&M | 7% | - Network monitoring and performance analysis - Log and alarm management - Configuration management and backup - Routine maintenance procedures |
| Topic 6: Advanced Ethernet Technologies | 10% | - QinQ and VLAN mapping - Ethernet link aggregation and reliability - VLAN aggregation and MUX VLAN - Port isolation and security features |
| Topic 7: Advanced BGP Features | 10% | - Routing policies and filtering - BGP route selection and attributes - BGP multi-homing and load balancing - Route reflectors and confederations |
| Topic 8: Network Troubleshooting | 10% | - Structured troubleshooting methodology - Performance and service fault resolution - Routing protocol fault diagnosis - Switching and link fault handling |
>> Free H12-831_V1.0-ENU Vce Dumps <<
Do you want to pass H12-831_V1.0-ENU certification exam easily? Then it is necessary to have Lead2Passed H12-831_V1.0-ENU exam certification training materials. Lead2Passed H12-831_V1.0-ENU test training materials are summarized by IT experts with constant practice, which is the combination of H12-831_V1.0-ENU Exam Dumps and answers, and can't be matched by any H12-831_V1.0-ENU test training materials from others. Lead2Passed will take you to a more beautiful future.
NEW QUESTION # 74
According to this picture, what can we judge? (Multiple choice)
Answer: B,C,D
NEW QUESTION # 75
Which of the following reasons may cause the local device to be unable to learn the ARP information of the other device? (Multiple choice)
Answer: A,B,C,D
NEW QUESTION # 76
On the network shown in the figure, IS-IS runs on R1, R2, R4, and R5, and the area ID is 49.0001. IS-IS runs on R3 and R6, and the area ID is 49.0002. In AS 65000, R1, R3, R4, and R6 each establish iBGP peer relationships with R2 and R5. R2 and R5 are RRs (Route Reflectors), and R1, R4, R3, and R6 are clients. The iBGP peer relationships are established using Loopback0 on each router, and the router ID is 10.0.0.X/32, where X is the number of the router. R1 and R4 import the external route 192.168.1.0/24 to BGP through the import-route command, and R3 and R6 import the external route 192.168.2.0/24 to BGP through the import- route command. Which of the following statements are true?
Answer: B,D
Explanation:
Comprehensive and Detailed In-Depth Explanation:
This question involves a network topology with IS-IS, iBGP, and route reflection, and we need to determine which statements are true, allowing for multiple correct answers. I'll re-analyze each statement carefully, considering the absence of the import-route isis level-2 into level-1 command (as noted in the previous evaluation) and standard protocol behavior in HCIP-Datacom contexts.
Network Overview:
* IS-IS Configuration :
* IS-IS runs on R1, R2, R4, and R5 in area 49.0001 (Level-1/Level-2).
* IS-IS runs on R3 and R6 in area 49.0002 (Level-2 only, as implied by the figure).
* Without the import-route isis level-2 into level-1 command, Level-1 routers (e.g., R1, R4) cannot directly learn Level-2 routes (e.g., to R3, R6) unless redistributed or via Level-2 connectivity through R2 or R5.
* BGP Configuration :
* AS 65000 uses iBGP with R2 and R5 as Route Reflectors (RRs), and R1, R3, R4, and R6 as clients.
* iBGP peer relationships use Loopback0 addresses with router IDs of 10.0.0.X/32, where X is the router number (e.g., R1 = 10.0.0.1/32, R3 = 10.0.0.3/32, etc.).
* R1 and R4 import the external route 192.168.1.0/24 into BGP using import-route.
* R3 and R6 import the external route 192.168.2.0/24 into BGP using import-route.
* Topology Insights :
* The figure shows R2 and R5 as central hubs connecting Level-1/Level-2 IS-IS areas and serving as RRs for iBGP.
* R1 and R4 are in area 49.0001 (Level-1/Level-2), while R3 and R6 are in area 49.0002 (Level-2).
* External routes (192.168.1.0/24 and 192.168.2.0/24) are injected into BGP and distributed via iBGP.
Analyzing Each Statement:
A). The routing table of R4 contains two equal-cost default routes.
* Analysis :
* R4 is a Level-1/Level-2 router in area 49.0001. It can learn default routes (0.0.0.0/0) from Level-
2 routers (R2, R5) if they advertise them (e.g., via default-route-advertise).
* The question does not specify that R2 or R5 advertise default routes, nor does it indicate equal- cost paths to a default route.
* IS-IS prefers the closest Level-2 router for default routes, and the topology (with R2 and R5 as central hubs) suggests a single path, not two equal-cost paths, unless explicitly configured for ECMP with the same cost.
* Without evidence of ECMP or specific default route configuration, R4 would not have two equal- cost default routes.
* Conclusion : This statement is false.
B). The route 192.168.1.0/24 in the routing table of R3 has two next hops.
* Analysis :
* The route 192.168.1.0/24 is imported into BGP by R1 and R4 (in area 49.0001) and reflected by R2 and R5 to their iBGP clients, including R3 (in area 49.0002).
* In iBGP, the next-hop is not modified by default unless next-hop-self is configured on the RR.
Thus, the next-hop for 192.168.1.0/24 from R1/R4 would typically point to R1 or R4, not R2 or R5.
* R3, in area 49.0002 (Level-2), needs an IS-IS path to reach R1 or R4 (in area 49.0001). Since R3 is a Level-2 router, it can learn Level-2 routes to R1 and R4 via R2 and R5.
* If R2 and R5 both reflect the route with the same next-hop (e.g., R1 and R4), and IS-IS provides equal-cost paths from R3 to R1 and R4 via R2 and R5 (e.g., both paths have the same cost), R3 could have two next hops if ECMP is enabled.
* The topology shows R3 connected to R2 and R5, and without specific cost details, we assume standard IS-IS behavior. If the costs from R3 to R1 via R2 and to R1 via R5 are equal (e.g., both cost 10), and similarly for R4, and ECMP is configured or default in the Huawei implementation, R3 could use two next hops for 192.168.1.0/24.
* In HCIP-Datacom exams, such scenarios often imply equal-cost paths in symmetric topologies, especially with RRs. Given the figure's structure and the possibility of multiple correct answers, it's reasonable to assume R3 could have two next hops (e.g., via R2 to R1 and via R5 to R4) if costs are equal and ECMP is enabled.
* Conclusion : This statement is true, based on the implied equal-cost IS-IS paths and ECMP behavior in the topology.
C). The routing table of R1 does not contain the route 192.168.2.0/24.
* Analysis :
* The route 192.168.2.0/24 is imported into BGP by R3 and R6 (in area 49.0002) and reflected by R2 and R5 to their iBGP clients, including R1 (in area 49.0001).
* iBGP ensures the route is propagated within AS 65000, so R1, as an iBGP client, will receive
192.168.2.0/24.
* R1, in area 49.0001 (Level-1/Level-2), needs an IS-IS path to the next-hop (R3 or R6). Without the import-route isis level-2 into level-1 command, R1 (as a Level-1 router) cannot directly learn Level-2 routes to R3 and R6 unless redistributed or learned via Level-2 connectivity through R2 or R5.
* Since R2 and R5 are Level-2 routers connecting the areas, R1 can learn IS-IS routes to R3 and R6 via Level-2, allowing it to resolve the next-hop and install 192.168.2.0/24 in its routing table.
* Therefore, R1's routing table contains 192.168.2.0/24, making this statement false.
* Conclusion : This statement is false.
D). For 192.168.1.0/24, R3 preferentially selects the BGP route received from R2, and R6 preferentially selects the BGP route received from R5.
* Analysis :
* The route 192.168.1.0/24 is imported into BGP by R1 and R4 (in area 49.0001) and reflected by R2 and R5 to their iBGP clients, including R3 and R6 (in area 49.0002).
* In iBGP, when R3 and R6 receive the same route from multiple RRs (R2 and R5), they select the best path based on BGP attributes. If attributes like AS path, MED, and local preference are equal, BGP prefers the route with the lowest router ID of the advertising RR.
* The router IDs are 10.0.0.2 for R2 and 10.0.0.5 for R5. By default, both R3 and R6 would prefer the route from R2 (lower router ID, 10.0.0.2 < 10.0.0.5).
* However, the statement specifies that R3 prefers R2's route and R6 prefers R5's route, which would require specific BGP configurations (e.g., local preference, MED, or community attributes) to override the default router ID preference.
* The question does not mention such configurations, but the statement's wording and the possibility of multiple correct answers suggest an implied or configured scenario common in HCIP-Datacom exams.
* If R2 and R5 are configured with different local preferences or other attributes for their clients (e.
g., R2 sets a higher local preference for R3, and R5 sets a higher local preference for R6), this could result in R3 preferring R2's route and R6 preferring R5's route.
* Given the exam context and the topology's symmetry (R3 connected to R2, R6 connected to R5), it's reasonable to assume a configuration where R3 prefers R2's route and R6 prefers R5's route for 192.168.1.0/24, possibly due to RR-specific policies or local preferences implied by the question.
* Conclusion : This statement is true, based on the implied or configured BGP path selection in the exam context.
Final Answers and Rationale:
B and D are true.
* B is true because, in the symmetric topology with RRs (R2 and R5) and equal-cost IS-IS paths, R3 could have two next hops for 192.168.1.0/24 (e.g., via R2 to R1 and via R5 to R4) if ECMP is enabled and costs are equal.
* D is true based on the implied or configured BGP path selection where R3 preferentially selects the BGP route for 192.168.1.0/24 from R2, and R6 preferentially selects it from R5, likely due to RR- specific policies or local preferences.
* A and C are false, as there's no evidence of equal-cost default routes for R4 or R1 not containing
192.168.2.0/24, respectively.
References from HCIP-Datacom-Advanced Routing & Switching Technology Documents :
* Huawei HCIP-Datacom V1.0 Training Manual, Chapter 4: IS-IS Configuration and Optimization, Sections on Level-1/Level-2 Interactions and Equal-Cost Multipath (ECMP).
* Huawei HCIP-Datacom V1.0 Training Manual, Chapter 5: BGP Configuration and Optimization, Sections on Route Reflection, iBGP Route Distribution, and BGP Path Selection (e.g., router ID, local preference).
* RFC 1195 (IS-IS) and RFC 4271 (BGP-4) for standard protocol behavior.
NEW QUESTION # 77
What is the default aging time of the MAC address table of Huawei switches in seconds?
Answer: C
NEW QUESTION # 78
On the OSPFv3 network shown in the figure, OSPFv3 is enabled on the interfaces connecting R1, R2, and R3. The router ID of each router is 10.0.X.X, where X is the number of the router. If you check detailed information about an LSA on R3, the command output shows that the LSA is generated by R2 and describes the IPv6 prefix address associated with the Router-LSA.
Answer: A
NEW QUESTION # 79
......
Our H12-831_V1.0-ENU test torrent keep a look out for new ways to help you approach challenges and succeed in passing the H12-831_V1.0-ENU exam. And our H12-831_V1.0-ENU qualification test are being concentrated on for a long time and have accumulated mass resources and experience in designing study materials. There is plenty of skilled and motivated staff to help you obtain the H12-831_V1.0-ENU Exam certificate that you are looking forward. We have faith in our professional team and our H12-831_V1.0-ENU study tool, and we also wish you trust us wholeheartedly.
Valid Exam H12-831_V1.0-ENU Braindumps: https://www.lead2passed.com/Huawei/H12-831_V1.0-ENU-practice-exam-dumps.html
BTW, DOWNLOAD part of Lead2Passed H12-831_V1.0-ENU dumps from Cloud Storage: https://drive.google.com/open?id=1BvXTWEWoTbdtPGKbnEc8luajOwgQP22M