Professionals have designed this Nokia SRAN-Radio-Network-Performance-Optimization exam dumps product for the ones who want to clear the SRAN-Radio-Network-Performance-Optimization test in a short time. Success in the Nokia SRAN-Radio-Network-Performance-Optimization exam questions helps you get a good salary job in a reputed company. VCETorrent Nokia SRAN-Radio-Network-Performance-Optimization Study Material is available in three formats. These formats have SRAN-Radio-Network-Performance-Optimization real dumps so that the applicants can memorize them and crack the SRAN-Radio-Network-Performance-Optimization certification test with a good score.
| Section | Weight | Objectives |
|---|---|---|
| SRAN Performance Optimization Fundamentals | 25% | - Key performance indicators (KPIs) definition and measurement - Network performance monitoring and analysis tools - Performance optimization principles and methodology |
| Mobility and Handover Optimization | 20% | - Inter-RAT mobility and optimization - Handover parameters and algorithms - Mobility robustness and optimization |
| Coverage and Capacity Optimization | 30% | - Interference analysis and mitigation techniques - Coverage analysis, tuning and optimization - Capacity planning, load balancing and optimization |
| Advanced Optimization and SON Features | 10% | - Energy saving and advanced features - Self-Organizing Networks (SON) use cases and optimization |
| Quality of Service and Resource Management | 15% | - QoS parameters, scheduling and admission control - Radio resource management and optimization |
>> Updated SRAN-Radio-Network-Performance-Optimization Dumps <<
As a dumps provider, VCETorrent have a good reputation in the field. We are equipped with a team of IT elites who do much study in the Nokia test questions and training materials. We check the updating of SRAN-Radio-Network-Performance-Optimization Dumps PDF everyday to make sure you pass SRAN-Radio-Network-Performance-Optimization valid test easily. The pass rate will be 100%.
NEW QUESTION # 10
Identify the missing network components X, Y, and Z in the architecture diagram.
Answer: A
Explanation:
The correct answer is B .
In the 5G Core , component X is connected to:
N2 from NG-RAN
N11 toward SMF
N15 toward PCF
N26 toward the EPC mobility entity
These are typical interfaces of the AMF , or Access and Mobility Management Function . Therefore, X = AMF .
In the EPC , component Z is connected to:
S1-MME from eNB
S11 toward the gateway
N26 toward the 5GC AMF
These are typical interfaces of the MME , or Mobility Management Entity . Therefore, Z = MME .
Component Y is outside the core user-plane path and represents the external service network connected through N6/SGi , commonly shown as IMS in voice-service architecture diagrams. Therefore, Y = IMS .
So the correct mapping is:
X: AMF, Y: IMS, Z: MME.
NEW QUESTION # 11
In the case of 5G SA, which of the following triggers the Radio Link Failure, or RLF, handling mechanism?
Answer: A
Explanation:
The correct answer is C.
In 5G SA, Radio Link Failure handling is mainly UE-driven. The UE monitors the radio link quality using lower-layer indications such as in-sync and out-of-sync indications. If the UE receives enough out-of-sync indications, it starts the relevant RLF timer, commonly associated with T310 behavior. If the link does not recover before the timer expires, the UE declares Radio Link Failure and starts recovery, such as RRC re- establishment.
The gNodeB can detect uplink problems and may release or reconfigure the UE, but the classical RLF handling mechanism is triggered at the UE side.
So the correct answer is:
UE indication timer only.
NEW QUESTION # 12
What is the role of admission control in 5G networks ?
Answer: A
Explanation:
The correct answer is D .
Admission control is responsible for deciding whether a new UE connection, bearer, service, or session can be accepted by the cell without negatively affecting existing users and services.
In 5G RAN, admission control checks available radio resources such as:
* PRB availability
* PDCCH/PUCCH capacity
* UE context capacity
* QoS requirements
* GBR or non-GBR bearer requirements
* Cell load and congestion status
It does not directly manage modulation schemes; that is handled by link adaptation. It also does not directly increase spectral efficiency or optimize downlink throughput, although good admission control indirectly protects user experience and avoids overload.
So the main role of admission control is:
To check whether there are enough resources for new connections.
NEW QUESTION # 13
The slice type SST value for Extreme Broadband is typically:
Answer: D
Explanation:
The correct answer is B .
In 5G network slicing, SST means Slice/Service Type . It identifies the high-level service category of a network slice.
Typical standardized SST values are:
SST = 1 # eMBB, enhanced Mobile Broadband
SST = 2 # URLLC, Ultra-Reliable Low-Latency Communication
SST = 3 # MIoT/mMTC, Massive IoT or massive Machine Type Communication
SST = 4 # V2X-related slice type
"Extreme Broadband" is normally aligned with eMBB , because it refers to high data rate, high capacity, and broadband user experience.
Therefore, the SST value for Extreme Broadband is:
1.
NEW QUESTION # 14
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?
Answer: D
Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.
NEW QUESTION # 15
......
Please don’t worry about the purchase process because it’s really simple for you. The first step is to select the SRAN-Radio-Network-Performance-Optimization test guide, choose your favorite version, the contents of different version are the same, but different in their ways of using. The second step: fill in with your email and make sure it is correct, because we send our MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 learn tool to you through the email. Later, if there is an update, our system will automatically send you the latest MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 version. At the same time, choose the appropriate payment method, such as SWREG, DHpay, etc. Next, enter the payment page, it is noteworthy that we only support credit card payment, do not support debit card. Generally, the system will send the SRAN-Radio-Network-Performance-Optimization Certification material to your mailbox within 10 minutes. If you don’t receive it please contact our after-sale service timely.
Test SRAN-Radio-Network-Performance-Optimization Lab Questions: https://www.vcetorrent.com/SRAN-Radio-Network-Performance-Optimization-valid-vce-torrent.html