さらに、Pass4Test EDGE-Expertダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1TlGpyEHAHFU6fkd3y1TNHXLLWSL0GpJg
あなたはいい仕事を見つけたい場合、EDGE-Expert参考資料を選択してください。多くのお客様はEDGE-Expert試験参考書を選択したら、EDGE-Expert認定試験資格証明書を取得しました。また、EDGEのサービスもいいし、２４時間のサービスを提供できます。だから、それは最もいい資料です。
| Section | Weight | Objectives |
|---|---|---|
| Software & Methodology | 25% | - EDGE Software Interface
|
| Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| EDGE System Overview | 15% | - Building Types & Applicability
|
| Energy Efficiency | 25% | - Lighting & Hot Water
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
EDGE-Expert実践ガイドまたはシステムの内容が更新された場合、更新された情報を電子メールアドレスに送信します。もちろん、製品の更新状況については、当社の電子メールをご覧ください。 EDGE-Expert模擬試験を使用してEDGE-Expert試験に合格するように協力できることを願っています。コンテンツの更新に加えて、EDGE-Expertトレーニング資料のシステムも更新されます。ご意見がありましたら、私たちの共通の目標は、ユーザーが満足する製品を作成することであると言えます。学習を開始した後、メールをチェックするための固定時間を設定できることを願っています。
質問 # 100
When properly designed, which of the following ventilation strategies can improve comfort by providing access to fresh air and reducing temperature without using any energy?
正解：C
解説：
According to the CBCI EDGE curriculum, natural ventilation is a passive design strategy that enhances indoor comfort by allowing fresh outdoor air to enter and circulate through a building without the use of mechanical systems. When properly designed, natural ventilation utilizes pressure differences created by wind and temperature variations, such as cross ventilation and stack effect, to drive airflow. This can reduce indoor temperatures and improve air quality without consuming electrical energy for fans or mechanical equipment.
In contrast, heat recovery ventilators and energy recovery ventilators are mechanical systems that use fans to move air through heat exchange cores. Although they are energy-efficient compared to conventional mechanical ventilation, they still require electrical power to operate. Similarly, continuously running mechanical ventilation systems depend entirely on powered fans and therefore consume energy.
EDGE promotes passive design measures, including natural ventilation where climate conditions permit, as a means to reduce cooling loads and improve energy performance. Because it operates without mechanical energy input, natural ventilation is the only option listed that meets the condition of improving comfort without using any energy.
質問 # 101
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?
正解：B
解説：
The preliminary certification stage requires specific documentation to verify the implementation of efficiency measures like Insulation for Cold Storage Envelope. The EDGE Certification Protocol outlines the evidence requirements: "For measures involving insulation, such as Insulation for Cold Storage Envelope, the Client must provide drawings at the preliminary certification stage that specify the U-value of the installed insulation to demonstrate compliance with the measure's requirements. The U-value must be lower than the Base Case to qualify for savings" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, drawings showing the U-value specification of the cold storage envelope, directly aligns with this requirement. Option A (calculations of Coefficient of Performance) is irrelevant, as COP applies to HVAC systems, not insulation:
"COP is used for chillers, not insulation measures" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (manufacturer's data sheets for the HVAC system) is also unrelated, as the measure focuses on the envelope, not HVAC: "HVAC documentation is not required for insulation measures" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (purchase receipts showing the U-value) is more relevant at the post-construction stage: "Purchase receipts are typically required at the post-construction stage to confirm installation, while drawings suffice for design-stage verification" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Thus, drawings with U-value specifications (Option C) are required at preliminary certification.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
質問 # 102
How often should the EDGE Zero Carbon certification be renewed?
正解：B
解説：
EDGE Zero Carbon certification requires periodic renewal to ensure ongoing compliance with zero carbon standards, particularly since it often involves carbon offsets or renewable energy commitments that may change over time. The EDGE Certification Protocol specifies the renewal timeline: "EDGE Zero Carbon certification must be renewed initially after two years to verify that the building continues to meet the zero carbon requirements, including the use of carbon offsets or renewable energy. Subsequently, renewal is required every four years to ensure long-term compliance with the standard" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option A, initially after two years, subsequently every four years, directly matches this requirement.Option B (initially after four years, subsequently every two years) reverses the timeline, which does not align with the protocol: "The initial two-year renewal ensures early verification, while the four-year cycle applies thereafter to balance monitoring with practicality" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option C (every two years if using carbon offsets, or every four years if using 100% renewable energy) and Option D (every four years if using carbon offsets, or every two years if using 100% renewable energy) introduce a distinction based on the method of achieving zero carbon status, which is not supported by EDGE documentation: "The renewal timeline for EDGE Zero Carbon is consistent regardless of whether carbon offsets or renewable energy are used, as both methods require ongoing verification of performance and offset purchases" (EDGE User Guide, Section 6.3: Advanced Certifications). The EDGE Methodology Report adds: "The two-year initial renewal allows for confirmation of operational data and offset validity, while the four-year subsequent renewal cycle ensures sustained commitment without excessive administrative burden" (EDGE Methodology Report Version 2.0, Section 2.3:
Zero Carbon Calculations). The EDGE User Guide further confirms: "EDGE Zero Carbon certification renewal follows a standard schedule of two years initially, then every four years, to maintain the integrity of the zero carbon claim over time" (EDGE User Guide, Section 6.3: Advanced Certifications). Thus, the correct renewal schedule is initially after two years, then every four years (Option A).
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications; EDGE Methodology Report Version 2.0, Section 2.3: Zero Carbon Calculations.
質問 # 103
What does the EDGE Auditor provide in the EDGE certification process for a project they are auditing?
正解：A
解説：
The role of the EDGE Auditor in the certification process is strictly defined to ensure independence and objectivity. The EDGE Expert and Auditor Protocols state: "The EDGE Auditor's primary role in the certification process is to conduct an independent audit of the project's self-assessment and supporting documentation, providing a recommendation for certification to the Certification Provider based on compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 2.2: Roles of EDGE Auditor). Option C, recommendation for certification, aligns with this responsibility. Option A (building design services) and Option D (recommendation of materials and building systems) are incorrect, as these are roles of the EDGE Expert or design team, not the Auditor: "Auditors do not provide design services or recommend materials; their role is to verify, not advise" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option B (approval of the building design) is also incorrect, as Auditors do not approve designs but assess compliance: "Final approval of certification is granted by the Certification Provider, not the Auditor" (EDGE Certification Protocol, Section 3.1: Certification Process). Thus, the Auditor provides a recommendation for certification (Option C).
Reference: EDGE Expert and Auditor Protocols, Section 2.2: Roles of EDGE Auditor, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.1: Certification Process.
質問 # 104
Which of the following is a required measure?
正解：A
解説：
In EDGE, certain measures are mandatory to ensure a baseline level of resource efficiency, while others are optional depending on the project's goals. The EDGE User Guide specifies mandatory measures for certification: "To achieve EDGE certification, projects must meet minimum requirements, including mandatory measures such as insulation of the roof to reduce heat gain or loss, ensuring a basic level of energy efficiency across all building typologies in climates where thermal performance is relevant" (EDGE User Guide, Section 4.1: Insulation Measures). Option B, insulation of roof, is identified as a required measure in EDGE, particularly in climates where heating or cooling loads are significant, which applies to most regions.
Option A (green roof) is an optional measure, not mandatory: "Green roofs are an optional measure in EDGE, contributing to energy and water savings but not required for certification" (EDGE User Guide, Section 4.5:
Additional Energy Measures). Option C (lighting controls) is also optional, as EDGE allows flexibility in lighting strategies: "Lighting controls, such as occupancy sensors, are optional measures that can enhance energy savings but are not mandatory" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures).
Option D (efficient lighting for internal areas) is encouraged but not required: "Efficient lighting for internal areas (EEM22) is an optional measure, requiring at least 90% of lamps to be efficient, but projects can achieve certification without it if other energy measures meet the 20% savings threshold" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). The EDGE Certification Protocol reinforces this: "Mandatory measures like roof insulation ensure a minimum standard of energy efficiency, while measures like green roofs, lighting controls, and efficient lighting are optional and contribute to overall savings" (EDGE Certification Protocol, Section 2.2: Certification Requirements). Therefore, insulation of the roof (Option B) is the required measure among the options.
Reference: EDGE User Guide Version 2.1, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 4.5: Additional Energy Measures; EDGE Certification Protocol, Section 2.2: Certification Requirements.
質問 # 105
......
Pass4Testが提供したEDGEのEDGE-Expertトレーニング資料を利用してから試験に合格することがとてもたやすことになって、これは今までがないことです。これは試験に合格した受験生の一人が言ったのです。Pass4Testが提供したEDGEのEDGE-Expertトレーニング資料はあなたの雑然とした考えを整理できます。そうしたらあなたは心理的なストレスを減らせるだけでなく、気楽に試験に受かることもできます。Pass4Testには一部の問題と解答を無料に提供して差し上げますから、もし私の話を信じないのなら、試用版を使ってみてください。利用してみたら効果があるかどうか自分でよく知っているようになります。あなたに絶対向いていると信じていますよ。
EDGE-Expert対応受験: https://www.pass4test.jp/EDGE-Expert.html
さらに、Pass4Test EDGE-Expertダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1TlGpyEHAHFU6fkd3y1TNHXLLWSL0GpJg