What's more, part of that ExamDumpsVCE JN0-364 dumps now are free: https://drive.google.com/open?id=1Yrmz0NpsGI_iMNc7qfb6zwB-e718mIK1
Looking for top-notch Implementing and Operating Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam questions? You've come to the right place! ExamDumpsVCE offers a comprehensive and affordable solution for all your JN0-364 exam needs. Our JN0-364 Exam Questions are regularly updated, and we provide a range of attractive features to enhance your preparation, including PDF format, an online practice test engine.
| Section | Objectives |
|---|---|
| Topic 1: Protocol-Independent Routing | - Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
|
| Topic 2: Multiprotocol Label Switching (MPLS) | - Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
|
| Topic 3: Open Shortest Path First (OSPF) | - Identify the concepts, operation, or functionality of OSPF
|
| Topic 4: IPv6 | - Identify the concepts, operation, or functionality of IPv6
|
| Topic 5: Border Gateway Protocol (BGP) | - Identify the concepts, operation, or functionality of BGP
|
| Topic 6: Layer 2 Bridging or VLANs | - Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
|
| Topic 7: Spanning Tree Protocols | - Identify the concepts, operation, or functionality of STP
|
| Topic 8: Intermediate System to Intermediate System (IS-IS) | - Identify the concepts, operation, or functionality of IS-IS
|
>> Valid Test JN0-364 Braindumps <<
The JN0-364 certification is the way to go in the modern Juniper era. Success in the Service Provider Routing and Switching, Specialist (JNCIS-SP) exam of this certification plays an essential role in an individual's future growth. Nowadays, almost every tech aspirant is taking the test to get JN0-364 certification and find well-paying jobs or promotions. But the main issue that most of the candidates face is not finding updated Juniper JN0-364 Practice Questions to prepare successfully for the Juniper JN0-364 certification exam in a short time.
NEW QUESTION # 32
You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)
Answer: B,D
Explanation:
In Junos OS, traffic engineering extensions for OSPF, which are required for an LSP to use the OSPF link state database for path computations, are not enabled by default. They must be explicitly enabled in the OSPF configuration. Therefore, answer C is correct. Answer B is incorrect and contradicts C. The 'no-cspf' command would disable CSPF (Constrained Shortest Path First), which is used for path computations in MPLS traffic engineering, so it should not be used if you want the LSP to utilize OSPF's link state database for path computations. Therefore, answer A is incorrect. The 'policing' parameter is not relevant to enabling traffic engineering extensions in OSPF, so answer D is incorrect.
NEW QUESTION # 33
Referring to the exhibit. Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
Answer: A,C
Explanation:
In a service provider MPLS network, P routers are interior routers that are used to transit MPLS- labeled packets between edge routers but do not attach or remove MPLS labels themselves.
These routers are also referred to as transit routers. They are neither ingress nor egress routers (which are typically labeled as PE routers).
NEW QUESTION # 34
Referring to the exhibit. You want the R1 and R3 routers to forward traffic destined to the
203.0.113.0/24 network through R2. Which BGP attribute would you modify to satisfy this requirement?
Answer: A
Explanation:
To influence the path taken through an autonomous system, the Multi-Exit Discriminator (MED) attribute can be used. By setting a lower MED on R2 for routes advertised to R1 and R3, it will make the path through R2 to the 203.0.113.0/24 network more preferable.
NEW QUESTION # 35
An established RSVP-signaled LSP suffers a link failure. What is one action taken by the local RSVP-enabled router?
Answer: A
NEW QUESTION # 36
Exhibit:
You have configured IPv4 and IPv6 in your network and all OSPF neighbors are established. You apply the configuration shown in the exhibit. Which statement is true in this scenario?
Answer: D
Explanation:
In a Juniper Networks environment running Junos OS, understanding the interaction between different versions of OSPF is essential for multi-protocol environments.OSPFv2(defined in RFC 2328) is the standard protocol used for routing IPv4 unicast traffic.OSPFv3(defined in RFC 5340) was originally developed to support IPv6 routing. However, OSPFv3 was later extended via RFC 5838 to support multiple address families (AF), allowing it to carry IPv4 unicast, IPv4 multicast, and other address types within a single OSPF instance.
According to Juniper technical documentation, Junos OS implements this multi-AF support in OSPFv3 through the use ofrealms. When the realm ipv4-unicast statement is configured under the [edit protocols ospf3] hierarchy, the OSPFv3 process becomes capable of calculating and advertising IPv4 routes.
In the provided exhibit, routerR2has a dual-protocol configuration. First, it is running standard OSPFv2, with the ge-0/0/1.0 interface (which is directly connected to the 172.16.2.0/24 network) participating in Area 0.
This ensures that the prefix is advertised as a standard IPv4 LSA to its neighbor,R1. Second, R2 is running OSPFv3 with the realm ipv4-unicast specifically enabled on that same ge-0/0/1.0 interface. Because of this realm, OSPFv3 also treats the 172.16.2.0/24 prefix as a reachable IPv4 destination and advertises it to R1 as an OSPFv3 IPv4-unicast LSA.
As a result, whenR1(which is also running both protocols) receives these routing updates, it will see the same destination prefix advertised by two different protocols. Its routing table (inet.0) will contain one entry learned from the OSPFv2 process and a second, separate entry learned from the OSPFv3 process. While the Junos Routing Engine will ultimately select one as the "active" route based on route preference (both protocols have a default preference of 10), both entries will technically exist within the Routing Information Base (RIB). This confirms that statementBis the correct description of the operational state of the network.
=========
NEW QUESTION # 37
......
Thousands of people are interested in earning the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) certification exam because it comes with multiple career benefits. ExamDumpsVCE have designed a product that contains the JN0-364 latest questions. These Juniper JN0-364 Exam Dumps are ideal for applicants who have a short time and want to clear the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam for the betterment of their future.
JN0-364 Reliable Test Preparation: https://www.examdumpsvce.com/JN0-364-valid-exam-dumps.html
P.S. Free & New JN0-364 dumps are available on Google Drive shared by ExamDumpsVCE: https://drive.google.com/open?id=1Yrmz0NpsGI_iMNc7qfb6zwB-e718mIK1