Almost everyone is trying to pass the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) certification exam to upgrade their CVs and land desired jobs. Every applicant of the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam faces just one problem and that is not finding real and Latest NSE7_FSN_AR-7.6 Exam Questions. Applicants are always confused about where to buy actual NSE7_FSN_AR-7.6 Exam Questions and prepare successfully for the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam in a short time.
| Section | Objectives |
|---|---|
| SD-WAN | - SD-WAN architecture - SD-WAN routing - Deployment and troubleshooting - Performance SLA - Overlay VPN - Application steering |
| Enterprise Firewall | - VPN technologies - Advanced firewall deployment - Troubleshooting - Routing and advanced networking - Centralized management and analytics - High availability - Authentication and identity - Security Fabric integration |
>> NSE7_FSN_AR-7.6 Exam Quizzes <<
Owning TestPassed is to have a key to pass NSE7_FSN_AR-7.6 exam certification. TestPassed's NSE7_FSN_AR-7.6 exam certification training materials is the achievement that our IT elite team take advantage of their own knowledge and experience, and grope for rapid development and achievements of the IT industry. Its authority is undeniable. Before purchase TestPassed's NSE7_FSN_AR-7.6 Braindumps, you can download NSE7_FSN_AR-7.6 free demo and answers on probation on TestPassed.COM.
NEW QUESTION # 27
Refer to the exhibits.
FGT-1 is an area border router (ABR) that has interfaces in OSPF areas 0.0.0.0 and 0.0.0.5. FGT-3 acts as an autonomous system border router (ASBR), importing static routes into OSPF. FGT-2 is an internal router with all its interfaces belonging to area 0.0.0.5. FGT-1 is receiving all advertised routes from FGT-2, however, FGT-3 is not receiving any of the advertised routes from FGT-1. What is the most likely reason for this?
(Choose one answer)
Answer: B
Explanation:
The get router info ospf database brief output on FGT-2 clearly indicates that Area 0.0.0.5 is configured as a
[Stub] area.
In OSPF, a Stub Area is specifically designed to reduce the size of the Link State Database (LSDB) on internal routers. The primary behavior of a Stub area is that it does not accept Type 5 (AS External) LSAs.
FGT-3 is the ASBR (Autonomous System Border Router) and is importing static routes, which are generated as Type 5 LSAs in the OSPF domain.
FGT-1 acts as the ABR (Area Border Router). Because Area 0.0.0.5 is a Stub area, FGT-1 blocks these Type
5 LSAs from entering Area 0.0.0.5.
Consequently, FGT-2 will not receive the specific external routes advertised by FGT-3. Instead, the ABR (FGT-1) injects a default route (0.0.0.0/0) into the Stub area to allow connectivity to the external world, which is visible in the database output.
While the question text mentions FGT-3 not receiving routes, the definitive configuration shown in the exhibit is the Stub area setting, which directly corresponds to the blocking of Type 5 LSA propagation (Option A).
NEW QUESTION # 28
Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
Which action will FortiGate take when using the default settings for SSL certificate inspection?
Answer: C
Explanation:
When FortiGate performs SSL certificate inspection with default settings, it checks if the Server Name Indication (SNI) matches either the Common Name (CN) or any Subject Alternative Name (SAN) in the server certificate. If there is no match, FortiGate does not block the connection; instead, it uses the CN value from the certificate ' s subject field to continue web filtering and categorization.
This behavior is described in the official Fortinet 7.6.4 Administration Guide:
"Check the SNI in the hello message with the CN or SAN field in the returned server certificate: Enable: If it is mismatched, use the CN in the server certificate." This is the default (Enable) mode, which differs from the Strict mode that would block the mismatched connection.
By default, this policy ensures service continuity and prevents disruptions due to certificate mismatches, allowing FortiGate to log and inspect based on the CN even when the requested SNI does not match. It provides a balance between connection reliability and the accuracy of filtering by certificate identity, allowing security policies to remain functional without unnecessary blocks. This approach is recommended by Fortinet to maintain usability for end-users while still supporting granular inspection.
References:
FortiGate 7.6.4 Administration Guide: Certificate Inspection
SSL/SSH Inspection Profile Configuration
NEW QUESTION # 29
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
Answer: A,D
Explanation:
The get router info bgp summary output lists BGP neighbor status:
Prefix Reception: The " State/PfxRcd " column shows the number of prefixes received from the neighbor- neighbor 100.64.1.254 has " 1 " , confirming option A.
Received Message Count: Under " MsgRcvd " , 18 packets have been received from neighbor 100.64.1.254.
This matches option C.
The second neighbor 100.64.2.254 is in " Active " state and has received/sent 0 packets, indicating that its TCP connection is NOT established, disproving option B.
There is no indication anywhere that the router is " still calculating " prefixes; " Active " just means no session is established, so option D is incorrect.
References:
FortiOS BGP Command Reference: BGP Neighbor States, PfxRcd, and Counters
NEW QUESTION # 30
Refer to the exhibit.
The partial output of diagnose sys session stat command is shown.
Which statement about the output shown in the exhibit is correct?
Answer: B
Explanation:
The correct answer is C.
The exhibit shows:
562 in ESTABLISHED state
27 in CLOSE state
memory_tension_drop=0
ephemeral=0/131072
According to the study guide, for TCP sessions: "The protocol state in the session table is a two-digit number.
For TCP, the first number (from left to right) is related to the server-side state and is 0 when the session is not subject to any inspection (flow or proxy)... The second digit is the client-side state." The same page also shows that value 1 = ESTABLISHED So, if a TCP session is in ESTABLISHED state and there is no inspection, its proto_state is 01:
first digit 0 = no inspection
second digit 1 = ESTABLISHED
That makes C correct. This is also consistent with FortiOS examples showing established TCP sessions with proto=6 proto_state=01 Why the other options are wrong:
A is wrong because the field that indicates sessions dropped due to low free memory is memory_tension_drop, and in the exhibit it is 0, not 113. The study guide states: "If there is a lack of free memory, the kernel deletes the oldest sessions. The command shown on this slide displays the number of sessions the kernel deleted because of this mechanism."So 113 is the clash value, not memory-tension drops.
B is wrong because ephemeral=0/131072 does not mean 131072 ephemeral sessions were recorded. The study guide explains that FortiGate "sets a hard limit on the maximum number of ephemeral sessions that can exist at the same time in the session table."Therefore:
0 = current ephemeral sessions
131072 = maximum allowed ephemeral sessions for that model/context
D is wrong because the study guide says the temporary retention for possible out-of-order packets happens in state value 5 (TIME_WAIT): "When a session is closed by both the sender and receiver, FortiGate keeps that session in the session table for a few seconds, to allow for any out-of-order packets that might arrive after the FIN/ACK packet. This is the state value 5."But the exhibit shows 27 in CLOSE state, and the same table shows CLOSE = 6, not TIME_WAIT So the verified answer is C.
NEW QUESTION # 31
In the context of SD-WAN, the terms underlay and overlay are commonly used to categorize links.
Which two statements about underlay and overlay links are correct? (Choose two.)
Answer: B,E
Explanation:
The SD-WAN 7.6 Enterprise Administrator Study Guide explicitly defines the relationship between underlays and overlays:
"Overlays are virtual links built on top of physical links-called underlay links." It further explains that the overlay topology consists of VPN tunnels and "adds flexible routing options." Therefore, option B is directly supported.
Option D is also correct. An overlay is not restricted to a particular physical transport. Fortinet identifies ISP, MPLS, and 4G/5G cellular connectivity as possible WAN transports. Consequently, a wireless WAN connection can provide the underlying transport over which an IPsec, GRE, or IP-in-IP overlay tunnel is established.
Option C is incorrect because underlay connectivity is not limited to wired links; cellular 4G/5G is a valid WAN transport.
Option A is incorrect because FortiLink is primarily the proprietary connectivity used between FortiGate and managed LAN extensions such as FortiSwitch and FortiAP. It is not inherently an SD-WAN WAN underlay.
Option E is incorrect because Fortinet identifies VPN tunnels-principally IPsec, but also GRE and IP-in-IP- as SD-WAN overlay links. A VLAN is a Layer 2 logical segmentation mechanism, not an SD-WAN overlay tunnel.
Reference: SD-WAN Overlay Design and Best Practices - Overlay Fundamentals , page 94.
NEW QUESTION # 32
......
It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related NSE7_FSN_AR-7.6 certification is the best way to show our professional ability, however, the exam is hard nut to crack and there are so many NSE7_FSN_AR-7.6 Preparation questions related to the exam, it seems impossible for us to systematize all of the key points needed for the exam by ourselves.
NSE7_FSN_AR-7.6 Pass Rate: https://www.testpassed.com/NSE7_FSN_AR-7.6-still-valid-exam.html