DOWNLOAD the newest TestSimulate EDGE-Expert PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1wt7qT5M2OlILGzMEzRi-WrhFXscVITuh
Our experts have devised a set of exam like EDGE-Expert practice tests for the candidates who want to ensure the highest percentage in real exam. Doing them make sure your grasp on the syllabus content that not only imparts confidence to you but also develops your time management skills for solving the test comprise given time lim. EDGE-Expert Practice Tests comprise a real exam like scenario and are amply fruitful to make sure a memorable success in EDGE-Expert exam.
| Section | Weight | Objectives |
|---|---|---|
| Software & Methodology | 25% | - Climate Zones & Weather Data
|
| Energy Efficiency | 25% | - Energy Consumption
|
| Water Efficiency & Materials | 25% | - Water Demand
|
| EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
>> EDGE-Expert Valid Exam Voucher <<
Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our EDGE-Expert exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our EDGE-Expert Study Materials. And most of all, you will get reward by our EDGE-Expert training engine in the least time with little effort.
NEW QUESTION # 23
Which of the following is a required measure?
Answer: B
Explanation:
In EDGE, certain measures are mandatory to ensure a baseline level of resource efficiency, while others are optional depending on the project's goals. The EDGE User Guide specifies mandatory measures for certification: "To achieve EDGE certification, projects must meet minimum requirements, including mandatory measures such as insulation of the roof to reduce heat gain or loss, ensuring a basic level of energy efficiency across all building typologies in climates where thermal performance is relevant" (EDGE User Guide, Section 4.1: Insulation Measures). Option B, insulation of roof, is identified as a required measure in EDGE, particularly in climates where heating or cooling loads are significant, which applies to most regions.
Option A (green roof) is an optional measure, not mandatory: "Green roofs are an optional measure in EDGE, contributing to energy and water savings but not required for certification" (EDGE User Guide, Section 4.5:
Additional Energy Measures). Option C (lighting controls) is also optional, as EDGE allows flexibility in lighting strategies: "Lighting controls, such as occupancy sensors, are optional measures that can enhance energy savings but are not mandatory" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures).
Option D (efficient lighting for internal areas) is encouraged but not required: "Efficient lighting for internal areas (EEM22) is an optional measure, requiring at least90% of lamps to be efficient, but projects can achieve certification without it if other energy measures meet the 20% savings threshold" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). The EDGE Certification Protocol reinforces this: "Mandatory measures like roof insulation ensure a minimum standard of energy efficiency, while measures like green roofs, lighting controls, and efficient lighting are optional and contribute to overall savings" (EDGE Certification Protocol, Section 2.2: Certification Requirements). Therefore, insulation of the roof (Option B) is the required measure among the options.
Reference:EDGE User Guide Version 2.1, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 4.5: Additional Energy Measures; EDGE Certification Protocol, Section 2.2: Certification Requirements.
NEW QUESTION # 24
Waste heat recovered from generators can NOT be a source of energy for
Answer: D
Explanation:
Within the EDGE framework, "waste heat recovery" from generators refers to capturing usable thermal energy from engine jacket water and exhaust gases that would otherwise be rejected to the environment. This recovered heat is a thermal resource, so it can directly serve end uses that require heat, such as space heating and domestic hot water heating. The curriculum also recognizes that recovered heat can indirectly support space cooling when it drives thermally activated cooling technologies, such as absorption chillers, where heat is used as the driving input to produce chilled water.
Mechanical ventilation, however, is fundamentally different. It is primarily an electrical end use because it relies on fans and motors to move air through ducts and provide required air changes. Thermal energy from recovered waste heat cannot power fan motors in the way electricity does. While waste heat might temper ventilation air through heat exchangers, that is not the same as being an energy source for the ventilation system itself. EDGE distinguishes between thermal end uses and electrical fan energy, so generator waste heat cannot be counted as a source of energy for mechanical ventilation.
Uploaded image
NEW QUESTION # 25
Which information about local climate is used for EDGE calculations?
Answer: D
Explanation:
The CBCI EDGE curriculum explains that EDGE uses a simplified, quasi-steady-state approach to estimate building energy performance. To keep the method practical and consistent across many countries, EDGE relies on climate datasets that represent typical conditions over longer time steps rather than detailed hour-by- hour weather files used in dynamic simulation tools. In EDGE, the local climate inputs applied in the baseline and improved case calculations are based on monthly climate averages, including outdoor minimum and maximum temperatures, humidity, wind conditions, and solar radiation.
Monthly averages provide an effective balance between accuracy and usability. They capture seasonal variation that strongly influences heating and cooling loads, while avoiding the complexity and data intensity of hourly modeling. Weekly averages are not used because they add complexity without providing the standardized global consistency that EDGE aims for. Annual averages would be too coarse, because they would hide seasonal peaks and understate the impact of envelope and HVAC efficiency measures.
Therefore, the correct statement is that EDGE calculations use monthly average climate information for the key weather parameters listed.
NEW QUESTION # 26
During a design audit, an EDGE Auditor notices that the project does not meet the EDGE standard for energy.
Which of the following is an acceptable course of action for the Auditor?
Answer: C
Explanation:
The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: "If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor's independence: "The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: "If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor's experience) oversteps the Auditor's role by offering consultancy: "The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: "During a design audit, the Auditor's role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert" (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: "The Auditor's report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.
NEW QUESTION # 27
Which of the following heating systems uses Coefficient of Performance (COP) as a measure of efficiency in the EDGE software?
Answer: A
Explanation:
In EDGE, the Coefficient of Performance (COP) is used to measure the efficiency of heating systems that produce heat using a refrigeration cycle, such as heat pumps. The EDGE Methodology Report specifies: "The Coefficient of Performance (COP) is used in EDGE to evaluate the efficiency of heat pumps, including ground source heat pumps, where it is defined as the ratio of thermal output to electrical input. This metric is not applied to direct heating systems like electric heaters or boilers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C, ground source heat pump, fits this description as it operates using a refrigeration cycle to transfer heat, and its efficiency is measured by COP in EDGE. Option A (electric heater) has an efficiency typically measured as 100% (or COP of 1), but EDGE does not use COP for such systems, as noted: "Electric heaters are assumed to have a fixed efficiency in EDGE, not evaluated via COP" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (condensing boiler) uses thermal efficiency (%), not COP, as per: "Boilers in EDGE are assessed by their thermal efficiency, not COP" (EDGE Methodology Report Version 2.0, Section 5.2: Heating Systems). Option D (sensible heat recovery from exhaust air) is a heat recovery method, not a heating system, and does not use COP: "Heat recovery systems are evaluated by their heat recovery effectiveness, not COP" (EDGE User Guide, Section 4.3:
Ventilation Measures). Thus, ground source heat pump (Option C) is the correct choice.
Reference: EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.2:
Heating Systems; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.3:
Ventilation Measures.
NEW QUESTION # 28
......
If you are applying for the EDGE-Expert certification exam, it is great to show your dedication to it. You cannot take it for granted because the Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) certification test is tough and you have to pay a good sum for appearing in it. You will lose money and time by studying with EDGE-Expert Exam Preparation material that is not updated. So, to avoid your loss and failure in the EDGE-Expert exam, you must prepare with actual EDGE EDGE-Expert questions from TestSimulate.
EDGE-Expert Relevant Answers: https://www.testsimulate.com/EDGE-Expert-study-materials.html
BTW, DOWNLOAD part of TestSimulate EDGE-Expert dumps from Cloud Storage: https://drive.google.com/open?id=1wt7qT5M2OlILGzMEzRi-WrhFXscVITuh