ITDumpsKR는 엘리트한 전문가들의 끊임없는 연구와 자신만의 노하우로 Nokia SRAN-Radio-Network-Performance-Optimization덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다. 기존의 Nokia SRAN-Radio-Network-Performance-Optimization시험문제를 분석하여 만들어낸 Nokia SRAN-Radio-Network-Performance-Optimization덤프의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. Nokia SRAN-Radio-Network-Performance-Optimization덤프는 합격보장해드리는 고품질 덤프입니다. ITDumpsKR의 덤프를 장바구니에 넣고 페이팔을 통한 안전결제를 진행하여 덤프를 다운받아 시험합격하세요.
| Section | Weight | Objectives |
|---|---|---|
| Mobility and Handover Optimization | 20% | - Mobility robustness and optimization - Inter-RAT mobility and optimization - Handover parameters and algorithms |
| Coverage and Capacity Optimization | 30% | - Interference analysis and mitigation techniques - Capacity planning, load balancing and optimization - Coverage analysis, tuning and optimization |
| Quality of Service and Resource Management | 15% | - Radio resource management and optimization - QoS parameters, scheduling and admission control |
| Advanced Optimization and SON Features | 10% | - Energy saving and advanced features - Self-Organizing Networks (SON) use cases and optimization |
| SRAN Performance Optimization Fundamentals | 25% | - Network performance monitoring and analysis tools - Performance optimization principles and methodology - Key performance indicators (KPIs) definition and measurement |
>> SRAN-Radio-Network-Performance-Optimization높은 통과율 덤프공부자료 <<
Nokia SRAN-Radio-Network-Performance-Optimization인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITDumpsKR는 여러분이Nokia SRAN-Radio-Network-Performance-Optimization인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Nokia SRAN-Radio-Network-Performance-Optimization인증시험패스에 노력을 다합니다. 하지만 우리ITDumpsKR에서는 20시간 좌우만 투자하면 무조건Nokia SRAN-Radio-Network-Performance-Optimization시험을 패스할 수 있도록 도와드립니다.
질문 # 31
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?
정답：B
설명：
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.
질문 # 32
The slice type SST value for Extreme Broadband is typically:
정답：C
설명：
The correct answer is B .
In 5G network slicing, SST means Slice/Service Type . It identifies the high-level service category of a network slice.
Typical standardized SST values are:
SST = 1 # eMBB, enhanced Mobile Broadband
SST = 2 # URLLC, Ultra-Reliable Low-Latency Communication
SST = 3 # MIoT/mMTC, Massive IoT or massive Machine Type Communication
SST = 4 # V2X-related slice type
"Extreme Broadband" is normally aligned with eMBB , because it refers to high data rate, high capacity, and broadband user experience.
Therefore, the SST value for Extreme Broadband is:
1.
질문 # 33
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?
정답：C
질문 # 34
What is the role of admission control in 5G networks ?
정답：A
질문 # 35
The CB009425 feature provides several enhancements to improve the transmission link budget for VoNR, offering a better customer experience. Which statements are correct regarding this feature?
정답：H
설명：
The correct answer is D.
The feature is focused on improving VoNR link robustness and user experience, especially near the cell edge or in difficult RF conditions. VoNR is sensitive to packet loss, delay, and uplink coverage limitations.
Therefore, link-budget improvement features commonly target BLER behavior, transport block sizing, and MCS robustness.
Statement A is correct because minimizing Packet Loss Rate, or PLR, directly improves VoNR speech quality and reduces mute, clipping, or robotic voice effects.
Statement B is correct because VoNR bearers can use specific initial BLER targets. A more suitable BLER target helps the scheduler choose a more robust MCS for voice traffic.
Statement C is correct because a configurable uplink minimum TBS, or Transport Block Size, helps ensure that small VoNR packets are transmitted efficiently and reliably.
Statement D is correct because MCS downgrade control can improve robustness by selecting a more conservative modulation and coding scheme for VoNR DRBs when radio conditions require it.
Therefore, all listed enhancements are part of the VoNR link-budget improvement concept:
A, B, C, and D.
질문 # 36
......
ITDumpsKR에서 출시한 Nokia인증SRAN-Radio-Network-Performance-Optimization 덤프는 시험문제점유율이 가장 높은 시험대비자료입니다. 실제Nokia인증SRAN-Radio-Network-Performance-Optimization시험문제유형과 같은 형식으로 제작된Nokia인증SRAN-Radio-Network-Performance-Optimization 시험공부자료로서ITDumpsKR덤프의 실용가치를 자랑하고 있습니다.덤프를 공부하여 시험불합격하시면 덤프비용은 환불처리해드립니다.
SRAN-Radio-Network-Performance-Optimization최신 업데이트버전 덤프문제: https://www.itdumpskr.com/SRAN-Radio-Network-Performance-Optimization-exam.html