DOWNLOAD the newest DumpsQuestion Civil-Engineering-Technology PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1RAQRF04zxjyv-QIpsaiVQj-k0N2Hid_X
Don't waste your time with unhelpful study methods. There are plenty of options available, but not all of them are suitable to help you pass the Technical Examination - Civil Engineering Technology C.E.T (Civil-Engineering-Technology) exam. Some resources out there may even do more harm than good by leading you astray. Our Civil-Engineering-Technology Exam Dumps are available with a free demo and up to 1 year of free updates.
| Section | Weight | Objectives |
|---|---|---|
| Materials Testing | 20% | - Soil mechanics and testing
|
| Structural Design Fundamentals | 20% | - Design of structural elements
|
| Surveying | 20% | - Surveying equipment and methods
|
| Municipal Engineering | 20% | - Wastewater and stormwater management
|
| Transportation Engineering | 20% | - Traffic engineering
|
>> Civil-Engineering-Technology Exam Success <<
The Technical Examination - Civil Engineering Technology C.E.T (Civil-Engineering-Technology) study material of DumpsQuestion is available in three different and easy-to-access formats. The first one is printable and portable Technical Examination - Civil Engineering Technology C.E.T (Civil-Engineering-Technology) PDF format. With the PDF version, you can access the collection of actual Technical Examination - Civil Engineering Technology C.E.T (Civil-Engineering-Technology) questions with your smart devices like smartphones, tablets, and laptops.
NEW QUESTION # 48
Which of the following items appears on a record drawing?
Answer: B
Explanation:
Record drawings (often associated with "as-built" documentation) are the finalized drawing set that reflects theconstructed conditionof the project. Their core purpose is to capture and preservefield changesand deviations from the original issued construction documents so that the owner and future stakeholders have an accurate technical record for operations, maintenance, and future modifications. During construction, changes can occur due to site conflicts, approved substitutions, design clarifications, and coordination between trades.
Those modifications must be consolidated so the final drawings match what was actually installed. In contrast, initial estimates and tender quantities belong to procurement and cost management documentation, while safety meeting minutes belong to safety administration records. A record drawing therefore focuses on revisions to the original design-locations, sizes, elevations, and details that differ from the original plan set-so that the final documents represent the "as-constructed" asset. This is why "changes from the original construction documents" is the defining item that appears on record drawings.
NEW QUESTION # 49
Who is responsible for establishing and maintaining a system that is compliant with the Occupational Health and Safety Act in a workplace?
Answer: B
Explanation:
On multi-employer construction work sites, Occupational Health and Safety frameworks commonly assign a coordinating duty to aprime contractor(or equivalent controlling entity) to ensure site-wide compliance. This role exists because multiple employers and subcontractors may be present, and safety responsibilities must be coordinated through one accountable system. Alberta's OHS guidance, for example, states that the prime contractor mustestablish and maintain a system or process that ensures compliancewith the Occupational Health and Safety Act, Regulation, and Code at the work site, including coordinating the health and safety activities of all employers. This does not remove duties from subcontractors or workers, but it makes the prime contractor the party responsible for the overarching compliance system (e.g., site safety plan, coordination, hazard controls, cooperation processes). Therefore, the correct answer isPrime contractor.
NEW QUESTION # 50
Concrete thrust block measures 0.6 m by X m in the diagram. If the test pressure is 1034 kPa and the bearing pressure of the soil is 239 kPa, what is the minimum value of X?
Answer: B
Explanation:
Thrust blocks resist unbalanced pressure forces at fittings (tees/bends/caps) by mobilizing bearing against undisturbed soil. The basic thrust relationship isForce = Pressure × Areaacting on the pipe's internal cross- sectional area. DIPRA's thrust restraint guide states that internal hydrostatic pressure acts on any plane with a force equal toP times A.
From the diagram, the pipe diameter is0.200 m, so pipe area. Thrust. Required soil bearing area. Given block face area, solve. Thus the minimumis0.226 m (Option C).
NEW QUESTION # 51
A civil engineering technologist is taking a sample of concrete cylinders from a truck. When should the sample be taken?
Answer: B
Explanation:
Concrete cylinder samples must represent thedelivered batch, so sampling must avoid the non-representative portions at the beginning and end of discharge where segregation and water/aggregate distribution can differ.
ASTM C172/C172M sampling practice requires collecting acomposite samplefrom themiddle portionof the load: specifically, not before about10%and not after about90%of the batch has been discharged, using two or more portions taken at regularly spaced intervals. A paper hosted by ASTM discussing sampling from truck mixers references ASTM C172/C172M and its requirement for collecting multiple portions from the discharged batch. Training/field guidance consistent with ASTM C172 also states sampling should occur after
~10% and before ~90% of discharge (i.e., the middle of the load). Therefore, the correct answer isin the middle of the load (Option C).
NEW QUESTION # 52
A civil engineering technologist has been asked to check the following foundation plan drawing. How many different sizes of concrete piles are required in this project?
Answer: C
Explanation:
Pile sizing on a foundation plan is determined by thepile schedule/legendand callouts that specify different pile types or diameters (and sometimes lengths/capacities) used in different locations to suit varying loads or subsurface conditions. Reviewing a foundation plan for "how many pile sizes" means identifying the distinct pile designations listed in the schedule (e.g., P1, P2, P3, P4), each corresponding to a different concrete pile size/specification. Engineering drawing practice requires reading the schedule and matching symbols/marks to their definitions to count unique sizes, not simply counting total piles on the plan. In the provided drawing, the pile schedule indicatesfourdistinct pile sizes/designations, so the project requiresfourdifferent sizes of concrete piles.
NEW QUESTION # 53
......
The company is preparing for the test candidates to prepare the Civil-Engineering-Technology exam guide professional brand, designed to be the most effective and easiest way to help users through their want to get the test Civil-Engineering-Technology certification and obtain the relevant certification. In comparison with similar educational products, our training materials are of superior quality and reasonable price, so our company has become the top enterprise in the international market. Our Civil-Engineering-Technology practice materials have been well received by the users, mainly reflected in the following advantages.
Valid Civil-Engineering-Technology Test Voucher: https://www.dumpsquestion.com/Civil-Engineering-Technology-exam-dumps-collection.html
BTW, DOWNLOAD part of DumpsQuestion Civil-Engineering-Technology dumps from Cloud Storage: https://drive.google.com/open?id=1RAQRF04zxjyv-QIpsaiVQj-k0N2Hid_X