DOWNLOAD the newest TestBraindump JN0-650 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1wk23qOCLw5RpgRrZkJD-O6VxxIiGdw2M
TestBraindump JN0-650 latest training guide covers all the main content which will be tested in the actual exam. Even if, there may occur few new questions, you still do not worry, because the content of Juniper JN0-650 latest free pdf will teach you the applicable knowledge which will help you solve the problem. So please rest assured to choose JN0-650 Valid Test Questions vce, high pass rate will bring you high score.
| Certification Vendor: | Juniper Networks |
|---|---|
| Exam Name: | Enterprise Routing and Switching, Professional (JNCIP-ENT) |
| Exam Number: | JN0-650 |
| Available Languages: | English, Japanese |
| Real Exam Qty: | 70-80 |
| Exam Duration: | 120 minutes |
| Certificate Validity Period: | 3 years |
| Exam Format: | Drag and Drop, Simulation, Multiple Choice, Multiple Select |
| Passing Score: | Pass / Fail (variable scale) |
| Exam Price: | $400 USD |
| Related Certifications: | JNCIA-ENT (JN0-347) JNCIS-ENT (JN0-349) |
| Sample Questions: | Juniper JN0-650 Sample Questions |
| Exam Way: | Online Proctored (OnVue) / In-Person Testing Center (Pearson VUE) |
| Pre Condition: | JNCIA-ENT (JN0-347) or equivalent knowledge recommended; no mandatory prerequisite for exam eligibility |
| Official Syllabus URL: | https://www.juniper.net/us/en/training/certification/track-data-center.html |
>> JN0-650 Latest Exam Registration <<
If you are clueless about the oncoming exam, our JN0-650 guide materials are trustworthy materials for your information. More than tens of thousands of exam candidate coincide to choose our JN0-650practice materials and passed their exam with satisfied scores, a lot of them even got full marks. According to the data that are proved and tested by our loyal customers, the pass rate of our JN0-650 Exam Questions is high as 98% to 100%.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 123
You have several switches in your network that use Cisco's PVST + protocol. You want your Juniper switches to interoperate with those devices. In this scenario, which protocol would you use?
Answer: B
Explanation:
To interoperate with Cisco PVST+ networks, Juniper switches use VSTP (Virtual Switch Trunking Protocol). VSTP provides per-VLAN spanning tree support compatible with PVST+ while maintaining Juniper's MSTP-based implementation.
NEW QUESTION # 124
Click the Exhibit button.
Referring to the exhibit, a PIM-SM network is set up to enable communication between multicast devices. Which two statements are true? (Choose two.)
Answer: B,D
NEW QUESTION # 125
Exhibit:
Your network has an unmanaged switch between the hosts and your EX Series switch. After the traffic enters the EX Series switch, each host must be on a separate VLAN. How would you accomplish this task?
Answer: A
NEW QUESTION # 126
Exhibit
Referring to the exhibit, what will enable active routes from both peers?
Answer: A
Explanation:
The exhibit shows router1 (AS 65001) connected to router2 (AS 65002) via two parallel physical links. The show bgp summary output indicates that sessions are established with two neighbors: 10.10.10.1 and
10.10.20.1. Currently, for the second neighbor (10.10.20.1), there are0 active routesdespite having4 accepted routes, which indicates that BGP has selected only one "best path" via the first neighbor for forwarding.
* BGP Best Path Selection:By default, BGP only selects a single best path for any given destination prefix and installs that one path into the forwarding table. In a topology with parallel links to the same AS, this leads to underutilization of available bandwidth.
* Multipath Solution (Option B):To enableactive routesfrom both peers and allow for load-balancing (ECMP) across both links, you must enable themultipathfeature.
* When the multipath statement is configured under the protocols bgp group ext-peers hierarchy, it tells Junos OS to install multiple equal-cost BGP paths into the routing table and subsequent forwarding table.
* Since both neighbors belong to the same peer group (ext-peers) and the same AS (65002), configuring multipath at the group level will apply to both sessions, allowing paths from both neighbors to be marked as "active".
* Incorrect Options:
* Option A:172.16.1.1 is the loopback address of router2. The exhibit shows peering is currently done using physical interface addresses (10.10.10.1 and 10.10.20.1), so this address is irrelevant to the current active sessions.
* Option C:Configuring the neighbor address alone without the multipath parameter will not change the best-path selection behavior.
* Option D:10.10.20.2 is the local interface IP of router1, not the neighbor's IP. BGP multipath must be configured to point to remote peer paths.
Configuration Example for Junos OS 24.4:To implement this, apply the following command: set protocols bgp group ext-peers multipath
NEW QUESTION # 127
Exhibit.
You want to limit port access to only one device at a time.
Referring to the exhibit, which configuration change will accomplish this task?
Answer: A
Explanation:
In Junos OS, the supplicant-mode configuration under protocols dot1x determines how the switch handles multiple MAC addresses on a single physical port. According to the exhibit, the current mode is set to Single, and the Number of connected supplicants is 2. This indicates that the port is currently allowing multiple devices, which contradicts the goal of limiting access to only one device at a time.
Here is the breakdown of why Option C is the correct solution based on Juniper's standard behavior:
Supplicant Mode: Single (Current State): In this mode, the first device to authenticate opens the port for all subsequent devices. As long as the first device remains authenticated, other devices can send traffic through the port without individual authentication. This is why the exhibit shows 2 connected supplicants despite the mode being " Single. " Supplicant Mode: Single-Secure (The Solution): This mode strictly limits the port to only one MAC address.
Once a device successfully authenticates via 802.1X, the switch drops any traffic coming from any other MAC address on that port. If the authenticated device logs off or the session times out, the port becomes available for a new device, but never more than one simultaneously. * Supplicant Mode: Multiple (Option B):
This mode allows multiple supplicants to authenticate individually. Each MAC address must go through its own authentication process. This would allow more than one device, which is the opposite of the user ' s requirement.
MAC RADIUS Restrict (Option A): This feature is used to force MAC-based authentication and does not inherently limit the number of devices to one in the same way that changing the supplicant mode does.
Maximum EAPOL requests (Option D): This parameter defines how many times the switch will send an EAP- Request/Identity frame to a supplicant before giving up. Changing this to 1 does not restrict the number of devices allowed on the port; it only changes the retry logic for a single authentication attempt.
Configuration Example for Junos OS 24.4: To implement this change, you would use the following command: set protocols dot1x edit interface ge-0/0/10.0 supplicant-mode single-secure
NEW QUESTION # 128
......
Exam JN0-650 Consultant: https://www.testbraindump.com/JN0-650-exam-prep.html
2026 Latest TestBraindump JN0-650 PDF Dumps and JN0-650 Exam Engine Free Share: https://drive.google.com/open?id=1wk23qOCLw5RpgRrZkJD-O6VxxIiGdw2M