H35-581_V2.0試題 & H35-581_V2.0考古题推薦

當你準備H35-581_V2.0考試的時候,盲目地學習與考試相關的知識是很不理想的學習方法。其實想要通過考試是有竅門的。如果你使用了好的工具,不僅可以節省很多的時間,還能得到輕鬆通過考試的保證。如果你想问什么工具,那当然是KaoGuTi的H35-581_V2.0考古題了。

本課程旨在為電信專業人員提供一個深入了解5G無線網路規劃的機會。這是一個中級課程,考慮了行業標準和要求。通過這個認證,個人可以在申請電信行業工作時脫穎而出,還可以幫助他們在組織內得到晉升的機會。

華為H35-581_V2.0(HCIP-5G-RNP&RNO V2.0)認證考試是一項專業認證考試,重點關注設計和部署5G無線接入網絡(RAN)和無線網絡優化(RNO)解決方案所需的技能和知識。該考試旨在測試候選人對5G技術的理解,包括5G RAN架構,5G RAN協議,5G RAN接口,5G RAN安全性和5G RAN優化。

>> H35-581_V2.0試題 <<

H35-581_V2.0考古题推薦,H35-581_V2.0認證題庫

Huawei的認證考試現在是很有人氣的考試。你已經取得了這個重要的認證資格嗎?比如,你已經參加了現在參加人數最多的H35-581_V2.0考試了嗎?如果還沒有的話,你應該儘快採取行動了。你必須要拿到如此重要的認證資格。在這裏我想說的就是怎樣才能更有效率地準備H35-581_V2.0考試,並且一次就通過考試拿到考試的認證資格。

華為 H35-581_V2.0 (HCIP-5G-RNP&RNO V2.0) 考試是一項專業的認證考試,旨在為想要展示其 5G 無線網路規劃和優化的知識的專業人員設計。該考試是華為認證 ICT 專業人員 (HCIP) 認證計劃的一部分,旨在驗證設計和優化 5G 無線網路所需的技能和知識。

最新的 HCIP-5G-RNP&RNO H35-581_V2.0 免費考試真題 (Q42-Q47):

問題 #42
A gNodeB can collect the causes of handover-preparation and handover-execution failures.

答案:B

解題說明:
The statement is true because 5G NR performance-management procedures support the collection of handover failure statistics, including information that identifies failures during both handover preparation and handover execution.
The handover procedure contains distinct preparation and execution phases.
During handover preparation , the source gNodeB coordinates with the target gNodeB or the core network to prepare the necessary radio and session resources.
Preparation can fail because of resource-admission restrictions, incompatible configuration, transport- signaling problems, or other procedural errors.
Applicable NGAP and XnAP handover failure messages include cause information that can be recorded for network performance analysis.
During handover execution , the UE attempts to access the target cell and complete the required radio- connection reconfiguration.
Execution failures can occur because of radio-link problems, random-access failures, timer expiration, or unsuccessful completion of the mobility procedure.
The gNodeB can collect relevant failure statistics through standardized performance measurements and applicable signaling or UE failure reports.
3GPP TS 28.552 defines separate counters for unsuccessful handover preparation and execution, including failure-cause-specific subcounters.
These measurements assist operators in distinguishing admission-control problems from radio-mobility and execution problems.
Therefore, option A is correct.
Official Reference: 3GPP TS 28.552, Sections 5.1.1.6.1.3 and 5.1.1.6.1.9, Number of Failed Handover Preparations and Executions ; TS 38.423, XnAP Handover Procedures .


問題 #43
For NR coverage optimization, the principle is to preferentially optimize SS-SINR and then SS-RSRP.

答案:A

解題說明:
Synchronization Signal Reference Signal Received Power (SS-RSRP) measures the received power of the synchronization-signal reference elements and is a fundamental indicator of NR radio coverage.
SS-RSRP optimization establishes whether the received serving-cell signal is sufficiently strong throughout the required coverage area.
Typical corrective actions include adjusting antenna azimuth, electrical downtilt, antenna height, reference- signal transmission characteristics, and site configuration.
Once acceptable signal-strength coverage has been established, the optimization process evaluates signal quality.
Synchronization Signal Signal-to-Interference-plus-Noise Ratio (SS-SINR) measures the synchronization- signal power relative to interference and noise.
Poor SS-SINR can occur even when SS-RSRP is strong, particularly in areas affected by overlapping cell coverage, excessive interference, or unsuitable beam configurations.
Interference coordination, antenna-pattern optimization, and mobility-parameter adjustments may improve SS- SINR and subsequent service performance.
The two measurements must ultimately be considered together because strong signal power does not guarantee acceptable radio quality.
However, the statement reverses the intended priority by placing SS-SINR before SS-RSRP.
Therefore, option B is correct.
Official Reference: 3GPP TS 38.215, Physical Layer Measurements ; TS 28.100, Annex A.1.3, Coverage Optimization Requirements and Measurements .
Technical warning / qualification: The sequence is a planning and optimization guideline, not an absolute
3GPP-mandated workflow. In an interference-limited network, SS-SINR may require immediate attention even when SS-RSRP is adequate.


問題 #44
A UE can report the following CSI types for CSI-RS measurement. Which of the statements below is incorrect?

答案:B

解題說明:
Option C is incorrect because the Rank Indicator (RI) identifies the preferred transmission rank, corresponding to the number of spatial layers suitable for MIMO transmission. It does not select an individual optimal layer based on CQI and PMI measurements.
In NR, CSI reporting allows the gNodeB to adapt beamforming, spatial multiplexing, modulation, and coding to the prevailing radio-channel conditions.
The Channel State Information Reference Signal (CSI-RS) provides measurement resources that support these procedures.
CRI (CSI-RS Resource Indicator) identifies the preferred CSI-RS resource. When CSI-RS resources correspond to distinct transmission beams, CRI can indicate the preferred beam.
PMI (Precoding Matrix Indicator) identifies a preferred precoding matrix selected from the configured codebook. This assists the gNodeB in determining suitable spatial transmission weights.
RI (Rank Indicator) specifies the preferred number of MIMO spatial layers, considering the channel's capacity to support simultaneous data streams.
CQI (Channel Quality Indicator) represents the estimated downlink channel quality under the configured reporting assumptions and supports link adaptation.
The distinction is that RI describes transmission rank, not layer identity. In configurations that support a Layer Indicator (LI), LI provides information concerning the strongest layer associated with the reported precoder.
Consequently, option C incorrectly describes the function of RI.
Official Reference: 3GPP TS 38.214, Section 5.2.1, CSI Reporting , including CRI, RI, LI, PMI, and CQI reporting quantities.


問題 #45
If a cell covers a high-speed railway on which UEs travel at 250 km/h, which PRACH format should be selected for that cell?

答案:D

解題說明:
PRACH Format 3 is the intended selection because its 5 kHz subcarrier spacing provides greater tolerance to Doppler shift than the 1.25 kHz spacing associated with the other listed long-preamble formats.
The Physical Random Access Channel (PRACH) is used by the UE to initiate random-access procedures, including initial access and applicable mobility-related synchronization procedures.
In high-speed railway environments, rapidly moving UEs experience significant Doppler frequency shifts due to their motion relative to the serving base station.
Doppler shift is approximately proportional to carrier frequency and radial velocity.
At a UE speed of 250 km/h, the Doppler frequency can become sufficiently large to impair correlation and detection performance when narrow PRACH subcarrier spacing is used.
According to the standardized PRACH configurations, Formats 0, 1, and 2 use 1.25 kHz subcarrier spacing, while Format 3 uses 5 kHz.
The wider spacing reduces the relative frequency-offset sensitivity of the random-access preamble, helping improve detection reliability in high-mobility conditions.
PRACH planning must also account for maximum cell radius, propagation delay, cyclic prefix, and configured random-access occasions.
For the listed long-preamble formats and the stated high-speed scenario, Format 3 is therefore the preferred answer.
Official Reference: 3GPP TS 38.211, Section 6.3.3, Physical Random Access Channel ; TS 38.101-1, Section 6.3.3.4, Table 6.3.3.4-1, PRACH ON Power Measurement Period .


問題 #46
To achieve the 5G downlink single-user peak rate, what must the number of downlink grants be? (The slot configuration is 4:1 and the subcarrier spacing is 30 kHz.)

答案:A

解題說明:
The expected answer is 1,600 downlink grants per second, based on the numerical assumptions used in the supplied 5G peak-rate calculation.
In 5G NR, subcarrier spacing determines the slot duration. For a normal cyclic prefix, the number of slots per millisecond is:
N_slots/ms = 2