PassTIP HPE6-A85 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1R_7RtDGEuLb1br0re-TA3agX9Jor0gYF
HP HPE6-A85인증시험이 이토록 인기가 많으니 우리PassTIP에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, PassTIP 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 PassTIP선택은 정답입니다. PassTIP선택함으로 당신이 바로 진정한IT인사입니다.
| Certification Vendor: | HPE Aruba Networking |
|---|---|
| Exam Name: | Aruba Campus Access Associate Exam |
| Exam Number: | HPE6-A85 |
| Related Certifications: | Aruba Certified Mobility Associate Aruba Certified Switching Associate |
| Exam Price: | $125 - $150 USD |
| Passing Score: | 67% |
| Real Exam Qty: | 60 |
| Available Languages: | Latin American Spanish, English, Japanese |
| Exam Format: | Scenario-based, Multiple-choice, Multiple-select |
| Exam Duration: | 90 minutes |
| Certificate Validity Period: | 3 years |
| Recommended Training: | HPE Press Official Study Guide Aruba Certified Campus Access Associate Training Course |
| Exam Registration: | Pearson VUE Registration |
| Sample Questions: | HP HPE6-A85 Sample Questions |
| Exam Way: | Online proctored or onsite at Pearson VUE test centers |
| Pre Condition: | No formal prerequisites; recommended basic networking knowledge and hands-on experience with Aruba products |
| Official Syllabus URL: | https://www.arubanetworks.com/support-services/training-services/certified-campus-access-associate/ |
PassTIP를 선택함으로 여러분은 HP 인증HPE6-A85시험에 대한 부담은 사라질 것입니다.우리 PassTIP는 끊임없는 업데이트로 항상 최신버전의 HP 인증HPE6-A85시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면PassTIP 에서 무료로 제공되는HP 인증HPE6-A85덤프의 일부분 문제를 체험하시면 됩니다.PassTIP 는 100%의 보장도를 자랑하며HP 인증HPE6-A85시험을 한번에 패스하도록 도와드립니다.
HP HPE6-A85 시험은 60개의 객관식 문제로 이루어져 있으며, 90분 이내에 완료해야 합니다. 이 시험은 영어, 일본어, 중국어 간체 등 다양한 언어로 제공됩니다. 시험에 합격하려면 최소 65%의 점수를 획득해야 합니다. 시험에 합격하면 3년간 유효한 Aruba Certified Mobility Associate (ACMA) 인증을 받게 됩니다.
질문 # 114
Two independent ArubaOS-CX 6300 switches with Spanning Tree (STP) settings are interconnected with two cables between ports 1/1/1 and 1/1/2 All four ports have "no shutdown" and "no routing" commands How will STP forward or discard traffic on these ports?
정답：B
설명：
The way that STP Spanning Tree Protocol. STP is a network protocol that ensures a loop-free topology for any bridged Ethernet local area network by preventing redundant paths between switches or bridges from creating loops that cause broadcast storms, multiple frame transmission, and MAC table instability. STP creates a logical tree structure that spans all of the switches in an extended network and blocks any redundant links that are not part of the tree from forwarding data packets3. will forward or discard traffic on these ports is as follows:
STP will elect a root bridge among the two switches based on their bridge IDs, which are composed of a priority value and a MAC address. The switch with the lower bridge ID will become the root bridge and will forward traffic on all its ports.
STP will assign a role and a state to each port on both switches based on their port IDs, which are composed of a priority value and a port number. The port with the lower port ID will become the designated port and will forward traffic, while the port with the higher port ID will become the alternate port and will discard traffic.
In this scenario, since both switches have two cables connected between ports 1/1/1 and 1/1/2, there will be two possible paths between them, creating a loop. To prevent this loop, STP will block one of these paths by discarding traffic on one of the ports on each switch.
Assuming that both switches have the same priority value (default is 32768), the switch with the lower MAC address will have the lower bridge ID and will become the root bridge. The root bridge will forward traffic on both ports 1/1/1 and 1/1/2.
Assuming that both ports have the same priority value (default is 128), port 1/1/1 will have a lower port ID than port 1/1/2 on both switches because it has a lower port number. Port 1/1/1 will become the designated port and will forward traffic, while port 1/1/2 will become the alternate port and will discard traffic.
Therefore, the switch with the lower MAC address will discard traffic on one port (port 1/1/2), while the switch with the higher MAC address will also discard traffic on one port (port 1/1/2).
질문 # 115
When using the OSPF dynamic routing protocol on an AOS-CX switch, what must match on the neighboring devices to exchange routes?
정답：A
설명：
OSPF neighbors must agree on the network type for an adjacency to form properly and exchange routes. The network type determines how OSPF operates on the link, including neighbor discovery and designated router election behavior. A mismatch can prevent successful adjacency formation.
질문 # 116
Based on the given topology, what is the requirement on an Aruba switch to enable LLDP messages to be received by Switch 1 port 1/1/24. when Router 1 is enabled with LLDP?
정답：B
설명：
On Aruba switches, the Link Layer Discovery Protocol (LLDP) is enabled by default on all ports. This protocol is an industry-standard network discovery protocol that is used for network devices to advertise their identity, capabilities, and neighbors on a locally managed network, typical in an IEEE 802 network. This is beneficial for network mapping and troubleshooting purposes. Since LLDP is enabled by default, there is no need for any additional configuration on Switch 1 port 1/1/24 to receive LLDP messages from Router 1, as long as LLDP is not disabled on the port.
질문 # 117
Based on the "snow ip route" output on an AruDaCX 8400. what type of route is "10.1 20 0/24, vrf default via
10.1.12.2. [1/0]"?
정답：C
설명：
A static route is a route that is manually configured on a router or switch and does not change unless it is modified by an administrator. Static routes are used to specify how traffic should reach specific destinations that are not directly connected to the device or that are not reachable by dynamic routing protocols. In Aruba CX switches, static routes can be configured using the ip route command in global configuration mode. Based on the "show ip route" output on an Aruba CX 8400 switch, the route "10.1 20 0/24, vrf default via 10.1.12.2,
[1/0]" is a static route because it has an administrative distance of 1 and a metric of 0, which are typical values for static routes. References: https://en.wikipedia.org/wiki/Static_routing https://www.arubanetworks.com
/techdocs/AOS-CX_10_04/NOSCG/Content/cx-noscg/ip-routing/static-routes.htmhttps://www.arubanetworks.
com/techdocs/AOS-CX_10_04/NOSCG/Content/cx-noscg/ip-routing/show-ip-route.htm
질문 # 118
When measuring signal strength, dBm is commonly used and 0 dBm corresponds to 1 mW power.
What does -20 dBm correspond to?
정답：A
설명：
Explanation
dBm is a unit of power that measures the ratio of a given power level to 1 mW. The formula to convert dBm to mW is: P(mW) = 1mW * 10
BONUS!!! PassTIP HPE6-A85 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1R_7RtDGEuLb1br0re-TA3agX9Jor0gYF