P.S. Free & New JN0-481 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=1LfD-vnKhfz6TVVthu5djhAAHeDUG2uAQ
Especially for those students who are headaches when reading a book, JN0-481 study tool is their gospel. Because doing exercises will make it easier for one person to concentrate, and at the same time, in the process of conducting a mock examination to test yourself, seeing the improvement of yourself will makes you feel very fulfilled and have a stronger interest in learning. JN0-481 Guide Torrent makes your learning process not boring at all.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Juniper Apstra Architecture | 15% | - Intent-based networking principles
|
| Topic 2: Blueprint Operations | 15% | - Troubleshooting
|
| Topic 3: Intent-Based Analytics | 10% | - Analytics features
|
| Topic 4: Apstra Design Phase | 15% | - Configuration and validation
|
| Topic 5: Data Center Architectures | 20% | - IP Fabrics
|
| Topic 6: Data Center Multitenancy | 10% | - Integration and extension
|
| Topic 7: Apstra Build and Deploy Phases | 15% | - Fabric deployment
|
To pass the Juniper JN0-481 Exam is a dream who are engaged in IT industry. If you want to change the dream into reality, you only need to choose the professional training. Pass4suresVCE is a professional website that providing IT certification training materials. Select Pass4suresVCE, it will ensure your success. No matter how high your pursuit of the goal, Pass4suresVCE will make your dreams become a reality.
NEW QUESTION # 40
What is the purpose of a Juniper Apstra rack?
Answer: C
Explanation:
A Juniper Apstra rack is a physical entity that contains one or more network devices, such as leaf nodes, access switches, or generic systems. A rack is used to organize and manage the network devices in the Apstra software application. A rack has the following characteristics:
It stores information on how leaf nodes connect to generic devices. This is because a rack can include generic systems, which are devices that are not managed by Juniper Apstra, but are connected to the network. A generic system can be a server, a firewall, a load balancer, or any other device that has a network interface. A rack stores the information on how the leaf nodes, which are the devices that provide access to the end hosts, connect to the generic devices, such as the port number, the link speed, the LAG mode, and the roles.
It has a rack type, which defines the type and number of leaf devices, access switches, and/or generic systems that are used in the rack. A rack type is a resource that is created in the data center design phase, and it does not specify the vendor or the model of the devices. A rack type can be predefined or custom-made, and it can be used to create multiple racks with the same structure and configuration.
It has a rack build, which assigns the specific vendor and model of the devices to the rack. A rack build is created in the staged phase, and it uses the rack type as a template. A rack build can also assign the resources, such as the IP addresses, the ASNs, and the VNIs, to the devices in the rack. It has a rack deployment, which applies the network configuration and services to the devices in the rack. A rack deployment is performed in the active phase, and it uses the rack build as a reference. A rack deployment can also monitor the network performance and compliance of the devices in the rack.
NEW QUESTION # 41
You have an EVPN-VXLAN data center IP fabric, with all single-homed hosts/servers.
Which two EVPN route types are present in this scenario? (Choose two.)
Answer: C,D
Explanation:
In an EVPN-VXLAN data center fabric with all single-homed hosts, the following EVPN route types are present:
- Type 3 (Inclusive Multicast Ethernet Tag):
Used for building multicast trees to support BUM (Broadcast, Unknown unicast, and Multicast) traffic in the VXLAN fabric.
- Type 2 (MAC/IP Advertisement):
Used to advertise MAC and optional IP addresses associated with end hosts (such as servers), which is necessary for host reachability in the EVPN fabric.
NEW QUESTION # 42
You staged several changes to your Juniper Apstra blueprint but have not committed them.
In this scenario, what is the effect of selecting Revert?
Answer: A
Explanation:
In Juniper Apstra, when you stage changes to a blueprint, they remain in the Staged area until you commit them. If you choose Revert, all uncommitted (staged) changes are discarded, and the blueprint reverts to its current Active state. This clears everything staged, not just the last change.
NEW QUESTION # 43
You staged several changes to your Juniper Apstra blueprint but have not committed them. In this scenario, what is the effect of selecting Revert?
Answer: A
Explanation:
In Apstra 5.1, blueprint changes follow an intent workflow: you edit intent in Staged, then review the delta in Uncommitted, and finally Commit to activate those changes and create a new revision. If you have staged changes that are visible under Uncommitted but decide not to proceed, the Revert action is used to discard them. Selecting Revert clears the blueprint's uncommitted intent delta and returns the blueprint to the last committed state (the currently active intended design baseline). In practical terms, it removes all pending edits that were made since the last commit-whether those edits were physical (links/topology), virtual (routing zones, virtual networks), policies (security policies), or catalog-driven operations-so that none of those changes will be deployed.
Revert is not a "single-step undo" limited to only the most recent change; it is a discard of the staged/uncommitted change set. It also does not roll back device configurations on its own (that is handled by revision operations such as Time Voyager rollbacks and subsequent deployment actions). Finally, Revert does not require a commit to take effect; it is used specifically to avoid committing changes. This behavior helps maintain clean operational control in EVPN-VXLAN fabrics by ensuring only validated and intentional intent updates are promoted to the deployed network state.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra4.2/apstra-user-guide/topics/task/blueprint-commit-revert.html
https://www.juniper.net/documentation/us/en/software/apstra6.1/apstra-user-guide/topics/task/time-voyager-rollback-blueprint-revision.html
NEW QUESTION # 44
You are creating a new security policy using Juniper Apstra.
Referring to the exhibit, which application point should you select to allow or deny traffic to or from a particular VRF?
Answer: A
Explanation:
In Apstra 5.1, multitenancy is modeled using routing zones, which map directly to the network operating system concept of a VRF. A VRF is an isolated Layer 3 routing instance with its own routing table and forwarding context, and Apstra's routing zone is the intent-based abstraction used to define and manage that isolation consistently across the fabric. Therefore, if your goal is to allow or deny traffic to or from a particular VRF, you must select Routing Zone as the security policy application point.
This choice enables you to express policy at the tenant boundary (VRF boundary) rather than at a single segment boundary. In EVPN-VXLAN data center fabrics, a tenant VRF commonly contains multiple virtual networks (VXLAN segments) and their associated IRB gateways on the leaf switches. Applying policy at the routing-zone level allows Apstra to compile intent and deploy enforcement consistently where traffic enters or exits that VRF context-typically as ACL constructs rendered as Junos firewall filters on the appropriate interfaces (for example, IRB interfaces for east-west controls or border interfaces for north-south controls).
By contrast, selecting Virtual Network targets a single segment (not the whole VRF), and Internal/External Endpoint targets specific endpoints or endpoint groups rather than the VRF-wide policy boundary. Hence, Routing Zone is the correct application point when policy scope is the VRF.
NEW QUESTION # 45
......
In order to meet the different demands of the different customers, these experts from our company have designed three different versions of the JN0-481 reference guide. All customers have the right to choose the most suitable version according to their need after buying our study materials. The PDF version of the JN0-481 exam prep has many special functions, including download the demo for free, support the printable format and so on. We can make sure that the PDF version of the JN0-481 Test Questions will be very convenient for all people. Of course, if you choose our study materials, you will have the chance to experience our PDF version.
JN0-481 Test Testking: https://www.pass4suresvce.com/JN0-481-pass4sure-vce-dumps.html
P.S. Free 2026 Juniper JN0-481 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=1LfD-vnKhfz6TVVthu5djhAAHeDUG2uAQ