Valid JN0-650 Test Topics - 100% Pass Realistic Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) Test Pattern

BONUS!!! Download part of DumpsKing JN0-650 dumps for free: https://drive.google.com/open?id=1gKfsKtPZvacC52RKlyCPsg79dGadzuOv

With the rapid development of economy, the demand of society for us is getting higher and higher. If you can have an international certification, then you will be more competitive in society. Our JN0-650 exam materials have helped many people improve their competitive in their company or when they are looking for better jobs. Because our JN0-650 Practice Questions are all the most advanced information and knowledage to equip you up as the most skilled person. Besides, you can get the certification as well.

Juniper JN0-650 Exam Syllabus Topics:

TopicDetails
Topic 1
  • BGP: This section focuses on Border Gateway Protocol operations including route selection, next hop resolution, BGP attributes, communities, load balancing, IPv4
  • IPv6 address families, advanced options, and routing policy implementation.
Topic 2
  • Class of Service (CoS): This domain covers QoS mechanisms in Junos including CoS processing, header fields, forwarding classes, classification, policers, schedulers, drop profiles, shaping, and rewrite rules.
Topic 3
  • EVPN: This section addresses Ethernet VPN technology for Layer 2 over Layer 3 connectivity, covering EVPN route types, VXLAN encapsulation, and multi-homing configurations.
Topic 4
  • Interior Gateway Protocols (IGPs): This domain covers internal routing protocols operating within a single autonomous system, including OSPFv2, OSPFv3, and routing policy implementation, along with configuration, troubleshooting, and monitoring skills.

>> Valid JN0-650 Test Topics <<

Quiz Accurate JN0-650 - Valid Enterprise Routing and Switching, Professional (JNCIP-ENT) Test Topics

A considerable amount of effort goes into our products. So in most cases our JN0-650 exam study materials are truly your best friend. On one hand, our JN0-650 learning guide is the combination of the latest knowledge and the newest technology, which could constantly inspire your interest of study. On the other hand, our JN0-650 test answers can predicate the exam correctly. Therefore you can handle the questions in the real exam like a cork. Through highly effective learning method and easily understanding explanation, you will pass the JN0-650 Exam with no difficulty. Our slogans are genuinely engraving on our mind that is to help you pass the JN0-650 exam, and ride on the crest of success!

Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) Sample Questions (Q44-Q49):

NEW QUESTION # 44
Exhibit

Your network receives the full Internet BGP routing table from two different ISPs. You want your local routers to use Provider A to forward all Internet traffic as long as Provider A is available.
Referring to the exhibit, which two actions would satisfy this requirement? (Choose two.)

Answer: B,D

Explanation:
In BGP path selection, the Local Preference attribute is one of the most common ways to influence outbound traffic from an Autonomous System (AS). It is a well-known discretionary attribute that is propagated throughout the AS to tell internal routers which path is preferred for a specific destination.
Priority Rule: In the BGP selection algorithm, a higher local preference value is always preferred over a lower one. The default value in Junos OS is 100.
Influencing Outbound Traffic (Option A): To ensure that Provider A is always preferred, you would apply an import policy on R1 (the router connected to Provider A) to set the local preference of all received routes to a value higher than the default (e.g., 200). Since 200 > 100, R3 and R4 will prefer the path via R1.
Alternative Method (Option C): Conversely, you can achieve the same result by applying an import policy on R2 (the router connected to Provider B) to set the local preference to a value lower than the default (e.g., 50).
Since the routes from R1 remain at the default of 100, and 100 > 50, the path via R1 (Provider A) is preferred.
Why B and D are incorrect: Setting a higher local preference on R2 (Option B) would make Provider B the preferred exit point. Setting a lower local preference on R1 (Option D) would make Provider A the least preferred exit point.


NEW QUESTION # 45
Exhibit

You want to provide better performance for the video traffic that traverses your network The video traffic enters your network without any class-of-service markings According to Juniper Networks, which two classification methods are performed by the routers shown in the exhibit? (Choose two.)

Answer: C,D

Explanation:
The exhibit illustrates a standard end-to-end Class of Service (CoS) path consisting of an edge router (R1) and core/intermediate routers (R2 and R3).
* Edge Classification (Option B): The scenario specifies that video traffic enters the network without any class-of-service markings. Because there are no DSCP or 802.1p bits to inspect, the ingress router (R1) cannot use simple Behavior Aggregate (BA) classification. Instead, it must use Multifield (MF) classification. MF classification allows the router to look deeper into the packet (Source/Destination IP, Protocol, Port numbers) to identify the video stream and assign it to a specific forwarding class. * Core Classification (Option D): Once R1 has identified the traffic, it will typically apply a rewrite rule on its egress interface to mark the packets with a specific CoS value (like a DSCP code). Consequently, the downstream routers (R2 and R3) do not need to perform expensive deep-packet inspection again. They can use Behavior Aggregate (BA) classification, which simply looks at the markings in the packet header to determine the appropriate forwarding priority.
* Option A and C: These are incorrect because BA classification is impossible on unmarked ingress traffic, and performing MF classification in the core is inefficient and not a recommended Juniper design practice for high-speed transit.


NEW QUESTION # 46
Your enterprise network is running BGP VPNs to support multitenancy. Some of the devices with which you peer BGP do not support the VPN NLRI. You must ensure that you do not send BGP VPN routes to the remote peer.
Which two configuration steps will satisfy this requirement? (Choose two.)

Answer: B,C


NEW QUESTION # 47
Routers R1 and R2 receive the same 172.16.1.0/24 prefix from external AS 200 and AS 300. R1 and R2 change the Local-Preference of the prefix to 250 in an export policy towards both of their IBGP peers.

Referring to the exhibit, which statement is true?

Answer: B


NEW QUESTION # 48
Which two statements are correct about EVPN Pure Type-5 routes? (Choose two.)

Answer: A,B

Explanation:
EVPN Pure Type-5 routes are used to carry IP prefixes between IP-VRFs without any associated MAC addresses. They require an overlay next hop for proper VXLAN routing and are commonly referred to as IP-VRF-to-IP-VRF routes. They do not rely on Type-7 sync routes and are not advertised with the MAC extended community, as no MAC address is involved.


NEW QUESTION # 49
......

We have always been known as the superior after sale service provider, since we all tend to take lead of the whole process after you choose our JN0-650 exam questions. So you have no need to trouble about our JN0-650 study guide, if you have any questions, we will instantly response to you. Our JN0-650 Training Materials will continue to pursue our passion for better performance and comprehensive service of JN0-650 exam.

JN0-650 Test Pattern: https://www.dumpsking.com/JN0-650-testking-dumps.html

P.S. Free & New JN0-650 dumps are available on Google Drive shared by DumpsKing: https://drive.google.com/open?id=1gKfsKtPZvacC52RKlyCPsg79dGadzuOv