We can tell you with confidence that the VNX301 practice materials are superior in all respects to similar products. First, users can have a free trial of VNX301 test prep, to help users better understand the VNX301 study guide. If the user discovers that the product is not appropriate for him, the user can choose another type of learning material. Respect the user's choice, will not impose the user must purchase the VNX301 practice materials. We can meet all the requirements of the user as much as possible, to help users better pass the qualifying VNX301 exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
You have Real4test Versa Networks VNX301 certification exam training materials, the same as having a bright future. Real4test Versa Networks VNX301 exam certification training is not only the cornerstone to success, and can help you to play a greater capacity in the IT industry. The training materials covering a wide range, not only to improve your knowledge of the culture, the more you can improve the operation level. If you are still waiting, still hesitating, or you are very depressed how through Versa Networks VNX301 Certification Exam. Do not worry, the Real4test Versa Networks VNX301 exam certification training materials will help you solve these problems.
NEW QUESTION # 32
You configured a Versa speed-test server on a VOS device, but the client cannot start the bandwidth test. A firewall exists between the client and server. Which port must be allowed through the firewall?
Answer: B
Explanation:
The correct answer is A . Versa link-bandwidth troubleshooting documentation explains that a VOS device can be configured as a Versa speed-test client, a Versa speed-test server, or both simultaneously. After the server is configured, the client starts the test by initiating a TCP-based connection toward the speed-test server. The server listens on port 5201 . The documentation includes an explicit note that if the VOS device is behind a firewall, port 5201 must be open .
This is different from the SD-WAN overlay data path, which commonly uses UDP-based transport encapsulation, and different from internet speed-test traffic, which uses other ports depending on the specific test type. In this scenario, the question states that a Versa speed-test server was configured, so the relevant requirement is TCP 5201 reachability from the client to the server.
TCP 443 may be used for management or web access, UDP 4790 is associated with SD-WAN transport encapsulation, and UDP 53 is DNS. None of those replace TCP 5201 for Versa speed-test server operation.
NEW QUESTION # 33
During onboarding, Versa Director shows the first branch-connect notification for a new CPE, but no later staged branch-connect notification appears. Which troubleshooting area should be investigated first?
Answer: A
Explanation:
The correct answer is B . Versa branch lifecycle notifications are generated at different stages of onboarding.
The first notification indicates that the branch connected using factory-default configuration. After that notification, Versa Director pushes the staging configuration to the branch and requests a reboot. After rebooting with staging configuration, the branch should connect again to the Controller, and a later branch- connect notification should appear.
If this later staged connection notification does not appear, Versa's troubleshooting guidance says to debug either the data path or IPsec connectivity from the branch to the Controller. This makes sense because the branch must have working transport reachability and IKE/IPsec establishment toward the Controller before it can continue the SD-WAN lifecycle.
Analytics disk usage, LDAP authentication, and URL filtering are not part of the branch staging control path. They may affect monitoring, user identity, or security inspection after the site is operational, but they do not explain why the branch stops after the initial factory-default onboarding notification.
NEW QUESTION # 34
You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect. Which action will you perform to solve the problem?
Answer: D
Explanation:
The correct action is to update the WAN gateway IP address in Device Bind Data and onboard the branch appliance again. Device Bind Data supplies site-specific values, such as WAN interface addressing and gateway information, that are merged with the workflow and template configuration during onboarding. If the wrong WAN gateway is entered, the branch may activate successfully from a workflow perspective, but the resulting WAN routing configuration is incorrect. As a result, the branch cannot establish proper transport reachability to the Controller. Versa troubleshooting documentation explains that, after establishing transport connectivity from a branch to a Controller, at least one WAN interface must be available, and the branch then establishes IKE-based IPsec connectivity to the Controller. If that IKE/IPsec connectivity fails, the Controller- facing ptvi interface remains down.
Changing the configuration only from the Appliance context is not the best answer because the incorrect value originated in the bind-data source used for provisioning. Modifying it manually from the branch CLI is also not recommended because the device is managed by Versa Director and template-driven configuration. Resetting the device does not automatically discover or "ping" the correct gateway. The correct remediation is to fix the bind data and repeat onboarding so the branch receives the correct generated configuration.
NEW QUESTION # 35
Examine the exhibit below.
Which two statements correctly explain the routing shown in the exhibit. (Choose two.)
Answer: A,C
Explanation:
The correct answers are A and C . The route table shown in the Versa SD-WAN design documentation includes a default route, 0.0.0.0/0 , with next hop 169.254.0.2 and exit interface tvi-0/603.0 . A default route is used when no more specific route exists in the routing table, so any unknown IPv4 unicast destination will follow that active default route through the tvi-0/603 interface. This directly supports option C.
The same design context describes local or central internet breakout, where Director workflows create TVI- based connectivity for breakout or gateway-style forwarding. In Versa SD-WAN, TVI interfaces are commonly used as internal virtual tunnel interfaces between routing instances, such as between a tenant LAN VR and a transport or breakout VR. The documentation also describes virtual TVI interface pairs being created by Director workflows between VRs for gateway routing use cases. Therefore, option A is also correct: tvi-0/603 is paired with another interface in another VR to support the default-route forwarding path.
The IP address is not shown as misconfigured; 169.254.x.x addressing is commonly used for point-to- point internal TVI links. The route is also not a blackhole route, because it has an active next hop and an exit interface.
NEW QUESTION # 36
A customer has purchased 10 Versa SD-WAN licenses. In this scenario, which statement is correct?
Answer: A
Explanation:
The correct answer is C . In Versa Secure SD-WAN, licensing and device management are centralized through Versa Director , not directly through the Controller. During zero-touch provisioning and staging, the branch device is brought under centralized management, and Director pushes the required staging and operational configuration. Versa staging documentation explains that during Stage 2 and Stage 3, Versa Director pushes configuration to the branch device, and after Stage 3 the branch becomes fully operational as part of the customer SD-WAN network.
Versa monitoring documentation also shows that the Director node provides license visibility, specifically stating that the Director monitoring view includes a License pane that displays information about the licenses installed on the VOS devices managed by the Director node. This confirms that license administration is handled from Director, not from the Controller. The Controller is responsible for SD-WAN control-plane functions and tunnel connectivity, but it is not the primary system for managing customer license subscriptions.
Option A is incomplete because the practical operational model is not simply receiving individual soft licenses. Option B incorrectly implies licenses are preloaded on physical CPEs as the key licensing method. Option D is incorrect because ZTP management and license subscription handling are not performed by the Controller.
NEW QUESTION # 37
......
In the era of information explosion, people are more longing for knowledge, which bring up people with ability by changing their thirst for knowledge into initiative and "want me to learn" into "I want to learn". As a result thousands of people put a premium on obtaining VNX301 certifications to prove their ability. With the difficulties and inconveniences existing for many groups of people like white-collar worker, getting a VNX301 Certification may be draining. Therefore, choosing a proper VNX301 exam guide can pave the path for you which is also conductive to gain the certification efficiently. So why should people choose us? There are several advantages about our VNX301 latest practice dumps for your reference.
Online VNX301 Version: https://www.real4test.com/VNX301_real-exam.html