BONUS!!! Itcertkr NS0-185 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1tmDYI1h3TKLcvpSnsSdjGMVXH7E4vbxe
Itcertkr는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. Network Appliance인증 NS0-185시험을 등록하신 분들은 바로Itcertkr의Network Appliance인증 NS0-185덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: ONTAP Configuration | 20% | - Security hardening and access control - Cluster peering setup - Node addition and removal - Troubleshooting and support tools |
| Topic 2: Customer Handoff | 10% | - Installation validation and testing - Documentation creation and handover - Operational guidance and training |
| Topic 3: Basic Installation Topics and Tools | 17% | - Physical cabling of ONTAP nodes
|
| Topic 4: ONTAP Switches | 15% | - Switched cluster cabling - Cluster switch software installation and configuration - Switch management and troubleshooting |
| Topic 5: ONTAP Concepts | 20% | - ONTAP version updates and upgrades - ONTAP cluster components and architecture - Storage efficiency features - Aggregate creation and cluster expansion |
| Topic 6: ONTAP Networking | 18% | - LIF creation and management - Network redundancy and high availability - DNS, NTP and service configuration - Network types and configurations |
Network Appliance NS0-185 덤프는 pdf버전,테스트엔진버전, 온라인버전 세가지 버전의 파일로 되어있습니다. pdf버전은 반드시 구매하셔야 하고 테스트엔진버전과 온라인버전은 pdf버전 구매시 추가구매만 가능합니다. pdf버전은 인쇄가능하기에 출퇴근길에서도 공부가능하고 테스트엔진버전은 pc에서 작동가능한 프로그램이고 온라인버전은 pc외에 휴태폰에서도 작동가능합니다.
질문 # 111
During installation, you need to configure time synchronization across all nodes. Which two configurations ensure consistent time settings and prevent authentication or logging issues?
정답：A,D
설명：
NTP ensures accurate time synchronization, while correct time zone settings maintain consistency across logs and services. Aggregates and SnapMirror do not affect system time configuration.
질문 # 112
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication? (Choose two.)
정답：B,D
설명：
Explanation (250-350 words):
Cluster peering authentication is a foundational ONTAP SAN concept that ensures secure trust between clusters before data replication can occur. Authentication is performed during the peering process and establishes mutual trust.
ONTAP supportspassphrase-based authentication, where a passphrase is either user-defined or automatically generated by ONTAP. This passphrase is exchanged between clusters to authenticate the peer relationship. LDAP is not used for cluster peering authentication.
Administrators can verify the authentication and status of cluster peering relationships using thecluster peer showcommand, which displays peer state, availability, and authentication status.
Peering encryption can be enabled independently and does not require authentication to be completed first, making option C incorrect.
Therefore, the correct answers areA and D.
질문 # 113
Which tool checks a newly installed environment for configuration errors?
정답：D
설명：
After installing a NetApp storage system, it is critical to validate the environment for configuration and cabling errors.Config Advisoris the NetApp-recommended tool specifically designed for this purpose.
Config Advisor performs automated checks against NetApp-supported configuration rules, including hardware cabling, HA setup, disk ownership, shelf connectivity, network configuration, and firmware compatibility. It identifies misconfigurations that could lead to operational issues if left unresolved.
FilerView and BNA are legacy or unrelated tools, and Synergy is not used for ONTAP installation validation.
Therefore, the correct answer isD (Config Advisor).
질문 # 114
You have a 4-node ONTAP 9.8 cluster with an AFF A400 HA pair, and you are adding a FAS8300 HA pair to the cluster. The FAS8300 controllers are not new and were decommissioned from another cluster. You are asked to enable hardware-level HA on the FAS8300 controllers. In this scenario, which shell is used on the FAS8300 controllers to enable this feature?
정답：D
설명：
https://kb.netapp.com/on-prem/ontap/OHW/OHW-
KBs/Controller_hardware_upgrade_for_AFF_and_FAS_systems_resolution_guide
질문 # 115
After you install an AFF A700 2-node cluster with DS224C shelves, Config Advisor reports that your SAS cabling is in mixed-path HA. You expected the SAS cabling be in quad-path HA.
You physically verify the LED status on the controllers and the shelves and notice no irregularities. However, a reboot of the SAS expander does not change the output.
In this scenario, what should you do next?
정답：B
설명：
This is a post-install validation and troubleshooting scenario for SAS shelf cabling. ONTAP hardware installation guidance distinguishes betweenmultipath/tri-pathandquad-pathconfigurations based on how shelves are cabled. For shelves with IOM12/IOM12B modules, quad-path configurations requiredouble-wide shelf-to-shelf connectivity: first using the standard connections (IOM ports 3 and 1) and then adding double- wide connections (IOM ports 4 and 2). If quad-path HA is intended but Config Advisor reportsmixed-path HA, then ONTAP's view of the end-to-end SAS topology does not match the expected double-wide design.
The question states LEDs look normal and rebooting the SAS expander did not change the status. That reduces the likelihood of a transient expander condition and shifts focus tophysical seating/connection integrity. In installation practice, a common next corrective step is tore-seat the SAS I/O modules(IOMs on the shelf side or SAS modules/adapters on the controller side depending on platform architecture). Reseating is a controlled, practical action to address partial lane connectivity, marginal contacts, or module insertion issues that can still present as "connected" at an LED level but result in ONTAP detecting fewer active paths than expected.
Option D is incorrect because multipath HA is not "the only" supported method on such platforms; ONTAP documentation explicitly describes quad-path ("double-wide") cabling rules and steps. Option B (disconnect and rerun Config Advisor) is destructive and does not correct the underlying condition; it is more of a diagnostic reset than a validated next fix step, and it risks creating additional variables. Option A (open a case and power off shelves) is premature given there is a clear, standard physical remediation action remaining.
Therefore, the correct next step is tore-seat the SAS IO modulesof the affected controller.
질문 # 116
......
Itcertkr에서는 Network Appliance인증 NS0-185시험을 도전해보시려는 분들을 위해 퍼펙트한 Network Appliance인증 NS0-185덤프를 가벼운 가격으로 제공해드립니다.덤프는Network Appliance인증 NS0-185시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. Itcertkr제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.
NS0-185최고품질 시험대비자료: https://www.itcertkr.com/NS0-185_exam.html
BONUS!!! Itcertkr NS0-185 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1tmDYI1h3TKLcvpSnsSdjGMVXH7E4vbxe