P.S. Free 2026 Cisco 300-120 dumps are available on Google Drive shared by NewPassLeader: https://drive.google.com/open?id=1ghwRplGkK1xFWo4_k6OQWTymzXAJjhMI
Getting the Implementing Cisco Wireless Advanced Solutions certification exam is necessary in order to get a job in your desired tech company. Success in the Implementing Cisco Wireless Advanced Solutions (300-120) certification exam gives you an edge over the others because you will have certified skills. The Implementing Cisco Wireless Advanced Solutions certification exam badge will make a good impression on the interviewer. Most of the people planning to attempt the 300-120 Exam are confused that how will they prepare and pass 300-120 exam with good grades.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: QoS on Wireless Networks | 10% | - Apply QoS for wireless clients - Implement QoS policies and wired-wireless mapping - Configure Application Visibility and Control (AVC) |
| Topic 2: Device Hardening | 10% | - Secure controllers, access points, and management interfaces - Apply security best practices and compliance - Implement access control, RADIUS/TACACS+ and ACLs |
| Topic 3: Location Services | 10% | - Deploy CMX and Cisco Spaces - Configure basic location services |
| Topic 4: FlexConnect | 15% | - Implement Office Extend - Deploy FlexConnect components, switching and operating modes - Configure and verify FlexConnect features and capabilities |
| Topic 5: Multicast | 10% | - Implement multicast infrastructure and components - Describe multicast impact on wireless networks - Implement mDNS and Multicast Direct - Configure multicast on WLANs |
| Topic 6: Security for Wireless Client Connectivity | 20% | - Implement identity-based networking policies - Configure client profiling on WLC and ISE - Implement BYOD and guest access - Configure authentication, encryption, and segmentation |
| Topic 7: Monitoring | 15% | - Generate and interpret logs and reports - Monitor wireless networks via Prime Infrastructure, DNA Center, and Spaces - Detect and analyze rogue APs, interferers, and client issues |
| Topic 8: Advanced Location Services | 10% | - Deploy location-aware guest services and portals - Implement CMX and Cisco Spaces advanced features - Troubleshoot location accuracy and high availability - Configure wIPS via Cisco Catalyst Center |
>> 300-120 Actual Test Answers <<
All consumers who are interested in 300-120 guide materials can download our free trial database at any time by visiting our platform. During the trial process, you can learn about the three modes of 300-120 study quiz and whether the presentation and explanation of the topic in 300-120 Preparation questions is consistent with what you want. If you are interested in our products, I believe that after your trial, you will certainly not hesitate to buy it.
NEW QUESTION # 46
A customer has Cisco FlexConnect APs at all remote branches and requires zero downtime through the FlexConnect Fault Tolerance feature. Which two configurations must be identical on both controllers to maintain connectivity when the APs switch from the primary WLC to the backup WLC because of a WAN failure? (Choose two.)
Answer: B,D
Explanation:
Options B and D are the expected answers, because FlexConnect Fault Tolerance depends on consistent WLAN configurations and mobility-domain membership between primary and backup wireless controllers.
Option B: The primary and backup WLCs must belong to the same mobility domain. Consistent mobility- domain configuration supports wireless client continuity when FlexConnect APs establish connectivity with a backup controller. A mobility-domain mismatch violates Cisco's documented fault-tolerance requirements and can interfere with seamless client preservation during controller transitions.
Option D: WLAN ordering and configuration must remain identical across both controllers. This includes WLAN identifiers, SSIDs, security settings, and relevant switching policies. Matching configurations prevent APs from receiving inconsistent WLAN parameters after joining the backup controller, thereby minimizing unnecessary client disconnections and authentication interruptions.
Incorrect options: A is not a specific identical-order requirement, although AAA reachability and consistent authentication policy remain important. C is not required to be identical because controller interface addresses and network connectivity can differ.
Important technical distinction: Option E also represents a valid configuration-consistency requirement for Catalyst 9800 deployments. Cisco explicitly recommends matching AP Join Profiles, Flex Profiles, Policy Profiles, RF Profiles, and Tags across controllers. Consequently, the question's two-answer requirement follows the traditional FlexConnect fault-tolerance criteria, but the wording is not fully exclusive when applied to Catalyst 9800 controllers.
Fault tolerance supports locally switched client sessions during controller transitions, provided the applicable authentication and configuration requirements are satisfied.
Cisco Study Guide References: WLSI v1.2 - FlexConnect Fault Tolerance; Controller Redundancy; FlexConnect Standalone and Connected Modes; WLAN Configuration Consistency.
NEW QUESTION # 47
What does ISE send to Wireless LAN Controller to indicate that the user has correctly entered credentials?
Answer: B
NEW QUESTION # 48
Which one of the following is a commonly used signal strength that defines the boundary of an AP cell?
Answer: C
NEW QUESTION # 49
Which of the following protocols is used between a wireless client and the authentication server?
Answer: A
NEW QUESTION # 50
All APs are receiving multicast traffic, instead of only the APs that need it. What is the cause of this problem?
Answer: A
Explanation:
When the controller operates in multicast mode, it forwards multicast traffic to the CAPWAP multicast group, and every AP that has joined that group receives the stream, whether or not a client behind it has requested the content. The mechanism that limits the delivery to APs with interested clients is IGMP snooping on the controller. With snooping enabled, the controller listens to IGMP membership reports from clients, builds a table of which groups are requested on which VLANs, and replicates the multicast packet only to the APs that serve those clients. If snooping is disabled, all APs receive the traffic, which wastes bandwidth and airtime.
The cause of the symptom is therefore that IGMP snooping is not enabled. The multicast group membership of the APs, the multicast address and the VLAN assignment would affect whether delivery works at all, but they do not explain why traffic reaches APs that do not need it.
Reference: Blueprint 3.1 (multicast components) and 3.3 (multicast on a WLAN); Cisco Wireless Controller Configuration Guide, IGMP snooping.
NEW QUESTION # 51
......
The second step: fill in with your email and make sure it is correct, because we send our Implementing Cisco Wireless Advanced Solutions learn tool to you through the email. Later, if there is an update, our system will automatically send you the latest Implementing Cisco Wireless Advanced Solutions version. At the same time, choose the appropriate payment method, such as SWREG, DHpay, etc. Next, enter the payment page, it is noteworthy that we only support credit card payment, do not support debit card. Generally, the system will send the 300-120 Certification material to your mailbox within 10 minutes. If you donβt receive it please contact our after-sale service timely.
300-120 Training Questions: https://www.newpassleader.com/Cisco/300-120-exam-preparation-materials.html
What's more, part of that NewPassLeader 300-120 dumps now are free: https://drive.google.com/open?id=1ghwRplGkK1xFWo4_k6OQWTymzXAJjhMI