BONUS！！！ Jpexam EDGE-Expertダンプの一部を無料でダウンロード：https://drive.google.com/open?id=1LIOR5GyYJGmkreprBGp4h_n3tkPMIMk0
当社Jpexamの専門家は、EDGE-Expertテストクイズが毎日更新されるかどうかを確認しています。 EDGE-Expert試験トレントは、更新システムによってデジタル化された世界に対応できることを保証できます。私たちは、お客様が教材に関する最新情報を入手できるように最善を尽くします。当社のEDGE-Expert試験トレントを購入する意思がある場合は、更新システムを楽しむ権利があることは間違いありません。 EDGE-Expert試験のダンプが更新されると、EDGE-Expertテストクイズの最新情報がすぐに届きます。すぐにEDGE-Expert試験準備をすぐに購入しましょう！
| Section | Objectives |
|---|---|
| EDGE Software Application | - Interpreting performance results and compliance - Project modeling and inputs in EDGE software |
| Resource Efficiency Metrics | - Materials efficiency and embodied energy basics - Water efficiency strategies and benchmarks - Energy efficiency concepts and savings calculation |
| EDGE Green Building Fundamentals | - Sustainable design principles - Overview of EDGE system and certification framework |
| Certification Process | - Verification and audit process - Project registration and documentation requirements |
JpexamのEDGEのEDGE-Expert試験トレーニング資料は全てのオンラインのトレーニング資料で一番よいものです。我々の知名度はとても高いです。これは受験生の皆さんが資料を利用した後の結果です。JpexamのEDGEのEDGE-Expert試験トレーニング資料を選んだら、１００パーセントの成功率を保証します。もし失敗だったら、我々は全額で返金します。受験生の皆さんの重要な利益が保障できるようにJpexamは絶対信頼できるものです。
質問 # 14
A project certificate that meets the EDGE Zero Carbon criteria fully on-site providing generation of on-site renewable electricity, will expire every
正解：B
解説：
Under the CBCI EDGE curriculum, EDGE Certified and EDGE Advanced are one-time certifications and do not require renewal. EDGE Zero Carbon is treated differently because it depends on ongoing operational conditions, especially how the building's remaining operational emissions are addressed through renewable electricity and, where applicable, offsets. For this reason, EDGE Zero Carbon certificates include an expiration date and require renewal to confirm that the carbon strategy remains valid over time.
The EDGE Zero Carbon rules specify different expiration periods depending on how the project achieves the renewable electricity and emissions balance. When a project meets the EDGE Zero Carbon criteria fully on- site, including the generation of on-site renewable electricity, the certificate expires after four years. This longer validity period reflects the higher confidence and stability associated with on-site renewable generation that is physically tied to the building and less dependent on external contracts or market instruments.
By comparison, projects that rely on purchased off-site renewable electricity and or carbon offsets have a shorter certificate validity period because procurement terms and availability can change. Therefore, for a fully on-site renewable electricity EDGE Zero Carbon project, the correct expiration period is four years.
質問 # 15
A medium-rise building comprises retail on the first two floors with offices on succeeding floors (third to fifth). If one of the tenants on the third floor aims for EDGE certification, which building type should be used?
正解：B
解説：
The EDGE software requires users to select a building type (typology) to model resource consumption accurately, and the choice depends on the scope of the certification. In this scenario, a tenant on the third floor (an office floor) of a medium-rise building seeks EDGE certification. The EDGE User Guide provides guidance on selecting building types for tenant spaces: "When a tenant within a larger building seeks EDGE certification, the building type should reflect the tenant's space. For an office tenant on the third floor of a mixed-use building, the 'Office' typology should be selected, as the certification applies only to the tenant's space, not the entire building, unless the whole building is being certified" (EDGE User Guide, Section 2.2:
Project Setup). Option A, Office, aligns with this guidance, as the tenant's space is an office. Option B (Retail) is incorrect, as the retail floors are on the first two levels, not the third: "Retail typology would apply if the tenant space were on the retail floors, not the office floors" (EDGE User Guide, Section 2.2: Project Setup). Option C (Mixed-use) is also incorrect, as this typology applies to the entire building, not a single tenant space: "Mixed-use typology is used when the entire building, including all uses (e.g., retail and offices), is being certified, not for individual tenant spaces" (EDGE Methodology Report Version 2.0, Section
2.1: Calculation Approach). Option D (Core and Shell) is typically used for buildings certified up to the core and shell stage, not for tenant fit-outs: "Core and Shell typology applies to buildings certified without tenant fit-outs, focusing on the building envelope and systems, not individual tenant spaces like an office" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE User Guide further clarifies: "For tenant-led certifications, the typology should match the tenant's use-e.g., 'Office' for an office tenant-even if the building has multiple uses, ensuring the Base Case reflects the tenant's specific consumption patterns" (EDGE User Guide, Section 2.2: Project Setup). Since the tenant on the third floor operates an office, the Office typology (Option A) is the correct choice for EDGE certification.
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 2.1: Calculation Approach; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard.
質問 # 16
Which statement is correct about a "required" measure?
正解：A
解説：
In the CBCI EDGE curriculum, a "required" measure refers to a measure that must be implemented in the project as part of meeting the EDGE certification criteria. Required measures are mandatory and cannot be excluded if the project is to achieve certification. Their implementation is verified during the design audit and confirmed during the site audit stage.
Option A is incorrect because simply assessing a measure is not sufficient; a required measure must be physically incorporated into the building design and construction. Option C is incorrect because a Special Ruling Request is used in exceptional cases to seek clarification or alternative compliance pathways, but required measures do not depend on SRR approval to be implemented. Option D is also incorrect because the concept of meeting or exceeding the baseline relates to performance calculations for savings, not specifically to the definition of a required measure.
Therefore, under the EDGE framework, a required measure is one that must be implemented in the project to comply with certification requirements, making option B the correct answer.
質問 # 17
What is a valid use for collected rainwater to qualify for savings under EDGE?
正解：C
解説：
In the EDGE water assessment, rainwater harvesting contributes to savings only when the collected rainwater is used to directly reduce the building's demand for potable or municipal water. The curriculum explains that qualifying water savings must come from substituting potable water in recognized end uses such as toilet flushing, irrigation, and cooling tower make-up water where applicable. When rainwater is used as make-up water for cooling towers, it displaces treated potable water that would otherwise be required for heat rejection systems, and this reduction is captured in the EDGE software water calculations.
By contrast, options such as groundwater recharge or simply redirecting rainwater to drains or nearby water bodies do not reduce the building's potable water consumption. These actions may be beneficial for stormwater management, flood control, or environmental protection, but they do not represent a direct offset of the building's indoor or process water demand in the way EDGE quantifies water savings for certification.
Therefore, the valid use that qualifies for EDGE water savings in this question is using collected rainwater for cooling towers.
質問 # 18
Which of the following is a primary resource for the EDGE Auditor when performing the site visit?
正解：A
解説：
During a site visit for post-construction certification, the EDGE Auditor relies on specific tools to verify compliance. The EDGE Expert and Auditor Protocols specify: "The primary resource for an EDGE Auditor during a site visit is the EDGE Auditor's checklist, which provides a structured list of items to verify, including the implementation of selected measures, alignment with the self-assessment, and compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). Option C, EDGE Auditor's checklist, matches this description as the key resource guiding the audit process. Option A (EDGE software) is a tool for assessment, not a resource for the site visit: "The EDGE software is used for self-assessment and desk audits, not directly during site visits" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (roof insulation U-value) and Option D (Window to Wall Ratio) are specific data points the Auditor may verify, not primary resources: "U-values and WWR are elements to check, not tools for the Auditor" (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). The checklist ensures all aspects of the project are systematically reviewed, making it the primary resource (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures; EDGE Certification Protocol, Section 3.2: Audit Requirements.
質問 # 19
......
すべての専門家は教育と経験を積んでいるため、EDGE-Expertテスト準備教材で長年働いています。 EDGE-Expertテストガイド教材を購入した場合、試験前に20〜30時間の学習を費やすだけで、EDGE-Expert試験に簡単に参加できます。試験に時間と精神を浪費する必要はありません。サービスについては、購入後10分以内に最新のEDGE-Expert認定ガイドを受け取ってダウンロードできる「高速配信」をサポートしています。そのため、EDGE-Expert試験ガイド資料を選択する際に心配する必要はありません。
EDGE-Expert日本語pdf問題: https://www.jpexam.com/EDGE-Expert_exam.html
P.S.JpexamがGoogle Driveで共有している無料の2026 EDGE EDGE-Expertダンプ：https://drive.google.com/open?id=1LIOR5GyYJGmkreprBGp4h_n3tkPMIMk0